Polycom 40/0 manual Configure Akamai CDN, To configure Akamai Media Server, Publish Manage Streams

Page 73

Live Streaming

3Configure the following basic settings.

External Media Servers Parameters

Parameter	Description

Server Name	Specify the name of the external server.

Server Address	Specify the IP or DNS of the external server you selected.

HTTP Port	The default value is 80.

RTSP Port	The default value is 554.

4Specify whether to select Enable Live. If enabled, also configure the following settings:

Enable Live Streaming

.

Parameter

User Name

Password

Test

Description

Specify the user name to access the external media server.

Specify the password to access the external media server.

Test whether the live streaming configurations work.

Configure AKAMAI CDN

You need to configure an AKAMAI media server and your RealPresence Capture Server to work with the server as well.

To configure AKAMAI Media Server:

1Click AKAMAI under Server.

2Click Add.

3Configure the following basic settings.

External Media Servers Parameters

Parameter	Description

Configuration Name	The CONFIG NAME displayed on AKAMAI configuration page under
	PUBLISH > Manage Streams.

Stream Name	The STREAM NAME displayed on AKAMAI configuration page under
	PUBLISH > Manage Streams.

Stream Number	The STREAM ID displayed on AKAMAI configuration page under PUBLISH >
	Manage Streams.

Polycom, Inc.

66

Image 73

Contents Polycom RealPresence Capture Server, Virtual Edition Page Contents Page Upgrade, Backup, Restore, and Migrate Fault ManagementRecord and Playback Live Streaming/VoDAppendix a Console Commands Manage Archives and Live Streams Using the User PortalAppendix B Configure External Servers Appendix C Configure the Server Working with VCS 102Polycom, Inc System Overview Capacity Feature Description Port licenseMaximum Record Port Conference Call or Endpoint Call Live Streaming Resources UsageVideo Call Playback Multi-user Login Capacity Local Media Storage Capacity People Video Content VideoMP4 128,000 103 700 33,950 User Permissions through Admin Portal Web-based Admin PortalUser Interfaces Web-based User Portal To log in to the Admin PortalSearch and Refresh Lists To search for a target item in the listUnderstand the Main Menu TV user interface also called the TvuiTV User Interface Fecc and Dtmf Operation Keys ScenarioConsole Hardware Requirements Hardware InstallationVMWare vSphere 5.5 Polycom, Inc Software Requirements Software InstallationResource and License Management Web Browser and OS Requirements Set up RealPresence Capture Server in a Virtual EnvironmentLicence of Capability License Make sure the NFS service has been installed and is running Configure NFS RequiredExamples Go to Licensing & Product Registration Activation/Upgrade Restart the NFS serviceProduct Activation Obtain the Product Activation Key from PolycomTo view the system activation status To download Capture Server software and VE versionParameter Description System Initialization Fast Configuration WizardConfigure System Time Configure IP Settings through ConsoleTo set IP Configure IP Settings through Admin PortalSet IP Parameters Description Click OK. The system restarts to apply your changes Configure the following general settingsGeneral System Network Parameters Description Set Route Parameters DescriptionSignaling Connection System ConfigurationSignal Connection Parameters Description Check System Status on HomeSystem Information Signaling Server StatusSystem Alerts Hardware StatusWeb Connections Manage Users and GroupsExternal Server Status User RolesClick Change Password To modify user password local user onlyModify User Information To modify user informationCreate and Manage Groups Set Recording ParametersRecord Parameters Description Configure the following settings323 Configure Signaling SettingsTo register the system to a gatekeeper to make H.323 calls Gatekeeper Parameters DescriptionGo to Configuration Signaling Settings SIP To configure the SIP settingsTo configure the port Configure Port SettingsGo to Configuration System Time Set the System TimeClick Configuration Media Storage Settings Configure Media Storage SettingsTo save your files on a network file system Configure Multicast Configure Multicast SettingsTo configure multicast parameters Go to Configuration Multicast SettingsMulticast To start a multicast when multicast is disabledMulticast of a Live Streaming To view a multicast streamingCertificate Management Install the Certificate in the SystemCertificate Types To install a certificate for a trusted root CA Install a Certificate Authority’s CertificateCreate a Certificate Signing Request To create a certificate signing requestView Certificate Details You can review installed certificate detailsTo view the certificate details Enter certificate informationRemove a Certificate To enable the client certificate validationClient Certification Use Ocsp to Obtain Revocation StatusUse Http protocol to access website Configure QoSTo configure Ocsp To enable Http protocol for server websiteConfigure Snmp Configure the following agent parameters To configure Snmp settingsConfigure the following security settings To configure an Active Directory server DiagnosticsGo to Configuration Active Directory Active DirectorySecurity Policy Parameters Description Password SettingsValid password UI Customization Go to Configuration CustomizationCustomize IVR Information To customize the IVR informationWhere Start Recording Immediately Default IVR Messages Message Type Message Text When PlayedCustomizing UI Logo Setup E-mail Portal Settings Admin Email Settings  Service Email SettingsSession Idle Timeout specifies the number Portal Setting Configuration Parameter DescriptionSession Maximum Number Per Application Configure Recording Templates Configure TemplatesRecord and Playback To view a recording templateConfiguration Call Settings on Admin Portal Same as configured under Configuration Call SettingsVideo To edit or delete a recording template Max Call LengthTo set max call length for recording and streaming calls Click the recording template you want to changeTo set max call length for streaming only calls Configure Transcoding TemplatesTo define a transcoding template Go to Template Transcoding TemplatesOnly when content is absent To view a transcoding template To configure a transcoding template for IIS media server» Go to Template Transcoding Templates Select ISM for Media TypeTo configure a transcoding template for Wowza media server Configure VRRsTo edit or delete a transcoding template To define a VRRTo edit or delete a VRR Start a RecordingClick the VRR entry you want to edit or delete Dial in from Endpoint To start a recording from the Admin PortalDial Out Parameters Description Change Conference Layout for RMX Hosted Calls Record from RMX via Recording LinkTo start recording by dialing RealPresence Capture Server To set conference layout type in a recording templatePoint-to-point Recording To start point-to-point recording from Admin PortalTo change conference layout type for an ongoing call  1x2 Dual view to recording serverTo view the quick code of an archive from Admin Portal Video Call Play Back when Dialing in from EndpointTo play back archives using the quick code Video Call PlaybackRMX Playback RMX 8.5 or higher Video Call Playback when Dialing out from Capture ServerTo start a playback call  SIPGo to Signaling Connection and click Live Streaming To configure live streams in recording templateMulti-bitrate Live Streaming Select a recording template Click EditConfigure IIS or Wowza Media Server Configure External Media ServersStart Live Streaming View Live Streaming InformationTo configure Windows Media Server Configure Windows Media ServerConfigure the following basic settings Click Windows Media Server under ServerTo configure Akamai Media Server Configure Akamai CDNEnable Live Streaming Parameter Publish Manage StreamsTo create a pre-link event Pre-link EventGo to Template Events StreamsPre-link Event Parameters Description To obtain the pre-link URL extension To edit a pre-link eventSelect the event you want to change Click Edit Select an event from the listTo start the pre-link recording Signaling Connection area, click Dial out to recordGo to Home Copy prelink informationManage Archives Media ManagementView Archive Details Play Back and Download ArchivesManage Archives To play back archives through the Admin PortalTo download one or several archives from Archives To download one or several media files from Media FilesTo delete one or several archive files Dynamic ArchivingTo add new media files Archives list, select an archiveTo delete a media file Transcoding Task ControlTo view transcoding status To stop an ongoing transcodingTo restart a transcoding System Upgrade and Fallback System AdministrationTo update your system software to the latest version To fall back the image, configuration and IVR messagesConfigure Log Settings System Log ConfigurationTo configure the log settings Go to Admin Log SettingsRestart and Shut Down the System Backup and Restore System ConfigurationLog Management Configure an FTP Server for Backup Back Up and Restore Media FilesTo back up current system configuration Go to Admin Config Backup/RestoreFTP Server Parameters Description Finish Alternate FTP Server Configuration if neededTo switch to the Admin Portal from the User Portal Manage Archives and Live Streams Using the User PortalTo log in to the User Portal RealPresence Capture Server User PortalTo search archives To view archive detailsTo play back archives through the User Portal Call View Live StreamingTo view your live streaming from the User Portal To start point-to-point recording from User PortalDial out from Capture Server through User Portal Configure the relevant settings Click OKClick Call Dial out to record Login Console Appendix a Console CommandsTo log in to Console via SSH Network Settings Console Command DescriptionsTo configure Static IP Address for LAN 1 or LAN Select Static Address Setup, click OK or type EnterReset Portal Admin Password Reset Console PasswordReset Config To configure Dhcp IP Address for LAN 1 or LANPing Reboot Windows Media Server Fallback ShutdownShow ExitConfigure the Wowza Media Server Appendix B Configure 3rd Party Media ServersGo to Server Wowza Click Add Configure the following basic settingsWowza Server Parameter Description Choose between Rtsp streaming and Rtmp streamingEnable VoD Parameter Description To configure the IIS media server Configure the IIS Media ServerDouble click Authentication To create a VRR for use with an external serverGo to Server IIS Enable VoD for IIS Parameter Description Enable IIS for Live Streaming Parameter DescriptionIIS Media Server Parameters Description To configure the Windows Media Server Configuring the Windows Media ServerGo to Server Windows Media Server On the Action panel, click AddExternal Media Servers Parameters Description Parameter Description Configure VCS for H.323 Calling Appendix C Configure the Server Working with VCSConfigure VCS for SIP Calling To configure VCS callingTCP VCS Zone Parameters SettingsSet search rule parameters