Polycom 40/0 manual System Initialization, Fast Configuration Wizard

System Initialization

Fast Configuration Wizard

.

The Fast Configuration Wizard pops up if Media Storage Settings is not configured, it gets you up and running as soon as possible, all settings in the wizard can be changed later on under the various configuration pages.

Step 1: Configure Media Storage Settings

By default, RealPresence Capture Server stores the files on a network file system if you enable it. For configuration steps, refer to Configure Media Storage Settings.

Note: You need to click Next and save changes at the next step by clicking OK, otherwise the configured settings will not be saved.

Step 2: Configure IP Settings

The RealPresence Capture Server system supports both IPv4 or IPv4 & IPv6 network communications. You can configure parameters to be used for network communication, including system IP address, DNS server, and NAT server.

For configuration steps, refer to To set IP:.

If you are done with configuration, click OK to save the changes.

Step 3: Product Activation

The basic system information is displayed here

.

For configuration steps, refer to Product Activation. As the Virtual Edition comes with a 90-day trial license, you can use the Capture Server system without activating the license.

Step 4: Configure Signaling Settings

For H.323, if a gatekeeper is configured on your network, you can register RealPresence Capture Server to the gatekeeper to simplify calling. A gatekeeper manages functions such as bandwidth control and admission control. A gatekeeper also handles address translation, which allows you to make calls using static aliases instead of IP addresses that may change each day.

If you make SIP calls, you can register RealPresence Capture Server to a SIP server to simplify calling.

For configuration steps, refer to Configure Signaling Settings

Polycom, Inc. 18