Furuno Ls4100 manual Alarms, Alarm description, Activating an alarm, Alarm menu, Alarm options

Page 17

1.14 Alarms

Alarm description

The LS-4100 has six conditions which generate both audio and visual alarms: bottom alarm, normal fish alarm, bottom lock fish alarm, water temperature alarm, arrival alarm and speed alarm. (The water temperature, arrival and speed alarms require appropriate sensors.)

Bottom alarm: The bottom alarm alerts you when the bottom is within the alarm range set. To activate the bottom alarm the depth must be displayed.

Fish (normal) alarm: The fish (normal) alarm tells you when fish are within the preset alarm range.

Fish (bottom lock) alarm: The fish (bottom lock) alarm, available with the bottom-lock mode, sounds when fish are within a certain distance from the bottom. Note that the bottom zoom display must be turned on to use this alarm.

Water temperature alarm: The water temperature alarm alerts when the water temperature is within (Inside alarm) the alarm range set or under/over (outside alarm) the range set.

Speed alarm: The speed alarm alerts you when the speed is within (Inside alarm) or under/over (Outside alarm) the preset speed.

Arrival alarm: The arrival alarm alerts when you are near a waypoint by the distance set.

Activating an alarm

1.Press the [MENU/ESC] key.

2.Press ▲ or ▼ to choose ALARM

MENU from page 2 on the menu.

3.Press the ► to show the ALARM menu.

ALARM

On

BOTTOM

FROM

:

5ft

RANGE :

10ft

FISH(Normal)

: On

FROM

:

5ft

RANGE :

10ft

FISH(B/L)

: On

FROM

:

8ft

RANGE :

1.0ft

FISH LEVEL

: Medium

(1/2)

Page

[MENU]: Exit

no.

ALARM

Inside

TEMPERATURE

FROM

:

72.4° F

RANGE :

1.0° F

SPEED : Off

FROM : 0.0kt

RANGE : 1.0kt

ARRIVAL ALRM : Off

RANGE : 0.01nm

(2/2)

[MENU]: Exit

Gray characters mean alarm is inactive.

Alarm menu

4.Use ▲ or ▼ to choose an alarm as appropriate.

5.Press ► to show the options menu.

							Off
		Off					Off

							Inside
							Inside
		On					Outside
							Outside

Fish, Arrival,					Temp, Speed
Bottom Alarm					Alarm Types
On/Off

Alarm options

6.Use ▲ or ▼ to choose alarm type:

Off: Alarm off, On: Alarm on

Inside: Alarm generated when speed (or water temperature) is within the range set.

Outside: Alarm generated when speed (or water temperature) is outside the range set.

7.Press ◄ to close the window.

For ARRIVAL ALARM setting, skip to step 12.

11

Image 17

Contents Echo Soundr Table of Contents Safety Instructions Safety Instructions for the Installer Foreword FeaturesWord to LS-4100 Owners IiiSystem Overview System configurationEquipment lists Standard supplyHow to remove the hard cover Power On/OffOperation Control DescriptionBrilliance/contrast adjustment window Adjusting Display Contrast, BrillianceMode selection window Choosing a Display, FrequencyDual frequency display Single frequency displayMarker-zoom display 50 kHzBottom-lock display Bottom-zoom displayNav data displays Bottom-zoom displayAutomatic Operation Menu Operating ProcedureHow automatic operation works Choosing automatic operationManual Operation Choosing the manual modeRange offset Gain offsetShifting the range Adjusting the gainMeasuring Depth How to measure depth with the VRMChoosing Picture Advance Speed Picture advance options windowSuppressing Low Level Noise Suppressing InterferenceForms of interference Clutter appearanceScope Display Erasing Weak EchoesAppearance of weak echoes Scope displayAlarm description AlarmsActivating an alarm Alarm menuWaypoints Depth, temperature, speed setting WindowSilencing the buzzer Fish level optionsRegistering waypoint by L/L Registering a waypoint on the screenKHz display Waypoint data displayEditing waypoints Setting destination waypointErasing waypoints Waypoint listNAV Data Setup window Setting Up Nav Data DisplaysNav data window and item displayable Nav data display-1HUE Picture Color Other Menu ItemsNAV data display-2 Deep Gain How white line worksSystem Menu Water temperature display wide, FSystem Menu System menusNav window Page MAINTENANCE, Troubleshooting Diagnostics TroubleshootingTroubleshooting table Installation menuTest Pattern Memory ClearClear memory display Test patternsThru-hull Mount Transducer InstallationDisplay Unit Typical thru-hull mount transducer installations Thru-hull mount transducer dimensionsAcceptable transducer mounting locations Suitable transducer mounting locationsTransom Mount Transducer Installing the 520-5PWD on a flat hullTransducer preparation 520-5PWD525-5PWD Installing the transom mount transducer on a deep-V hullInstalling the 525-5PWD Inside-hull Transducer Optional Triducer Pre-test for speed and temperatureFinal preparation Triducer 525ST-MSDMounting location Installation of bracketHeight required at mounting location Mounting location on single drive boatSensor position and transom angle AdjustingAttaching the sensor to the bracket Vertical adjustment and cable routingAttaching the sensor to the bracket Cable routingOptional Water Temperature/Speed Sensor Optional equipment Power connectorEstablishing the ground Water temp/speed sensor IEC 61162-1 Data SentencesNmea PORT, Nmea MIX Installation MenuBottom level display Waas options windowSpecifications of Echo Sounder LS-4100 Page Page Display Unit 00014698000