NorthStar Navigation NorthStar 491 manual Viewing the seabed depth, Viewing the depth marker

Page 40

Viewing the seabed depth

The seabed depth (the “bottom”) is displayed in a black box at the left edge of the ECHO screen.

You can change the size and location of the depth box on the ECHO screen. Its size on the SOUNDTRAC screen is always small.

There are four available sizes:

small

medium

large

huge

To resize the depth box or move it up or down:

1.At the ECHO screen, press DEPTH.

2.To cycle through the size choices, repeatedly press BOTTOM BOX. To move the box up and down, press the

CURSOR PAD.

3.Press RETURN to go back to the ECHO screen.

The depth box can also be adjusted by pressing MORE, then pressing DATA.

Viewing the depth marker

You can use the depth marker to accurately measure the depth of an echo. To display the depth marker—a dashed horizontal line—and move this marker up or down, press the CURSOR PAD down. Attached to the depth marker line is a small black box, which displays the marker’s exact depth.

The depth marker also affects the display in Marker Zoom mode.

Changing the depth settings

You can adjust the shallowest and deepest echoes to be shown on the ECHO screen. In automatic mode, the echo sounder sets these values based on its current environment. However,

Page 36

491 Echo Sounder Operations Manual

Image 40
Contents Northstar Echo Sounder Contents Reviewing past echoes using SoundTrac Troubleshooting 491 OperationsPage 1Welcome Welcome to the Northstar Using this manualOrganization Conventions Technical support Service and repairHearing from you How echo sounding works 961/962 echo sounder system components Setting up Powering the 491 on and offUsing 491 with the 961/962 Using the 491 with the 957/958 Press the Port Setup Options key961/962 echo sounder menu structure 957/958 echo sounder menu structure 2Quick Start Using the Echo Sounder Displaying the echo sounder’s picture Illustrated Echo screenIllustrated Soundtrac screen At the Chart Overlay Selection window, press Using demo modeChart Overlay screen Depth and temperature Introducing the displayed informationEcho sounding Navigation Status tabsUsing automatic mode Cruising or fishingChanging the frequency of echoes Manually overriding automatic mode50 kHz 200 kHz Echo screen with both frequencies displayed Zooming in and out Choosing a zoom modeChoosing the zoom scale Using bottom zoom Using bottom lock zoomUsing bottom lock/ center zoom Setup functions Accessing the setup screenEntering numerical values Changing the temperature graph’s units and scale Transducer depthChanging the depth units Number of special waypointsSpeed and temperature sensor setup 961/962 sensor setup screen957958/ sensor setup screen 3Adjusting the Echo Sounder Picture Adjusting the gain strong echoes Picture menuAdjusting the clutter weak echoes Gain windowAdjusting the signal level weak echoes Clutter windowSuppressing interference the noise limiter Selecting the color bar hue and white level Understanding the color barSetting the white level Hue and white level windowEcho Sounder Operations Manual 4Understanding Depth Settings Viewing the seabed depth Changing the depth settingsViewing the depth marker Setting the picture’s shift starting depth Shift windowSetting the picture’s range Range window Echo Sounder Operations Manual 5Other Functions Using the More key Using the More key Changing the advance speedDisplaying the A-scope Scope on single-frequency echo screenUsing the A-scope with dual frequencies Setting the Echo screen dataScope on dual-frequency echo screen Bottom depth box Temperature box Echo screen data selectionsTemperature graph Introducing snapshotsSpeed through the water Taking and storing a snapshotArchiving and restoring a snapshot with a floppy disk Snapshot screen 961/962 onlyArchiving and restoring snapshots with a Zip disk Archiving snapshots screen 961/962 onlySetting up the video image overlay Echo Sounder Operations Manual 6Reviewing past echoes using SoundTrac Viewing past echoes using SoundTrac SoundTrac screenMarking fish as waypoints Navigating to a past echo positionGoing directly to a past echo position Selected Cursor Position window appears7Setting the Alarms Understanding the alarms Setting the fish alarmSetting the upper and lower marker depths Fish alarm windowSetting the bottom alarm Setting inside or outside fish markersAlarm Turning the fish alarm on and offSetting the bottom level Bottom alarm windowTurning the bottom alarm on and off Setting the temperature alarmTemperature alarm window Turning the temperature alarm on and off Upper limit window is highlighted in blackWhen the temperature alarm sounds, an alert message is 8Troubleshooting 491 Operations Troubleshooting the echo sounder Checking the transducerTroubleshooting the echo sounder No echoes displayed when Star key is pressedChecking the transducer OFFManufacturer Model Power Northstar P/N Maintaining a transducerA491 Features and Specifications Performance characteristicsPhysical characteristics Environmental characteristicsScreen notations InterfacingManual controls ON/OFFEcho Sounder Operations Manual Glossary Echo Sounder Operations Manual