Furuno FA-150 installation manual Mounting procedure, GPS/VHF Combined antenna

Page 12

Mounting procedure

1.Dismount the bottom cover, cut the cable-tie inside the unit and take out the coaxial connector attached to the combined box.

2.Loosen four screws to loosen whip antenna fixture and pull out the coaxial connector coming from the combined box through the hole in the whip antenna fixture.

3.Connect the coaxial connector to the whip antenna base and wrap the junction part of the whip antenna with vulcanizing tape and then vinyl tape for waterproofing.

4.Insert the whip antenna from the top of the combined antenna.

5.Secure the whip antenna with whip antenna fixture.

6.Using a new plastic band (supplied), secure the cables and coaxial connector inside the antenna case.

7.Mount the bottom cover.

8.Fix the GPS/VHF combined antenna to the ship’s stanchion (40 to 50 mm diameter) with antenna fixing brackets, flat washers and hex. nuts.

Note: Coat the exposed parts of bolts and nuts with silicon sealant.

Whip antenna fixture

Loosen four screws. (M5x16)

Antenna fixing bracket

Combined box

Bottom cover

GPS/VHF Combined antenna

6

Image 12

Contents Uais Transponder 00015008314 Safety Instructions System Configuration Category of the unitsEquipment Lists Standard supplyIii Optional supply Mounting Antenna UnitsGPS antenna unit Extending antenna cableHow to attach the connector N-P-8DFB for cable 8D-FB-CV How to attach connector N-P-8DFBVHF antenna Location CablingHorizontal separation distance How to attach the plug M-P-7 Installation overview of GPS/VHF combined antenna3 GPS/VHF combined antenna Mounting procedure GPS/VHF Combined antennaInstalling distributor unit DB-1 Monitor Unit Desktop mountingFlush mounting Type Name Type Code No QtyUais Transponder MountingPower Supply option Pilot Plug optionWiring ConnectionInternal ports of the Transponder Cable connection at transponder Fabrication of cables TTYCS-4, TTYCS-1Q and TTYCS-1How to attach wires to the Wago connector Fabrication of power cable DPYC-2.5Changing Ship’s Mains Specifications 100-115 VACSetting and Adjustment Inland AIS Specific SettingsEntering activation key Selecting AIS mode Setting blue sign statusPassword entry window NAV Status menu initial sub-menuInitial Settings menu SET Blue Sign SW sub-menuSetting MMSI, IMO No., Name and Call Sign SET Mmsi sub-menuSetting GPS Antenna Position Setting Ship Type Setting I/O PortSetting COM port/PC port Table Ship typePress the ENT key again to display the Mode setting window COM1 Long Range Priority setup Priority menuQuality setup Inland AIS only Attaching LAN KIT Option AttachingSetting LAN port for PC network Setting LAN port for Navnet 3D networkContinuous This page intentionally left blank IEC 61162-1/2 Data Sentences TransponderInput data/Sentences Output data/SentencesInland AIS specific sentences Input+056#..#6+10/#64+#.5 # 8# #%%5514+5 Antenna Cable Set CP20-02700 CP20-02710 Antenna Cable Set CP20-00300 CP20-00310 Page Page Page Hatai Mar,2707 R.Esumi May 20 Page Jan 26/Oct/09 R.Esumi Page Page Page Page Page Transponder Unit

Related manuals

Manual 54 pages 24.96 Kb