Furuno FA-150 installation manual Safety Instructions

SAFETY INSTRUCTIONS

The installer must read the safety instructions before attempting to install this equipment.

WARNING	could result in death or serious injury.
	Indicates a potentially hazardous situation which, if not avoided,
CAUTION	Indicates a potentially hazardous situation which, if not avoided,
	can result in minor or moderate injury.
Warning, Caution	Prohibitive Action	Mandatory Action

WARNING

ELECTRICAL SHOCK HAZARD

Do not open the equipment unless totally familiar with electrical circuits and service manual.

Only qualified personnel should work inside the equipment.

Turn off the power at the switch- board before beginning the installation.

Fire or electrical shock can result if the power is left on.

Do not install the equipment where it may get wet from rain or water splash.

Water in the equipment can result in fire, electrical shock or damage the equipment.

Be sure that the power supply is compatible with the voltage rating of the equipment.

Connection of an incorrect power supply can cause fire or damage the equipment. The voltage rating of the equipment appears on the label above the power connector.

CAUTION

Observe the following compass safe distances to prevent interference to a magnetic compass:

	Standard	Steering
	compass	compass
FA-1501	1.2 m	0.8 m
UAIS Transponder
FA-1502	0.45 m	0.3 m
Monitor unit
GVA-100	0.3 m	0.3 m
DB-1	0.3 m	0.3 m
PR-240	0.9m	0.6 m

Attach securely protective earth to the ship's body.

The protective earth is required to the power supply to prevent electrical shock.

i