3.4 Setting Ship Type
1.In the INITIAL SETTINGS window, press the ▲ or ▼ key to choose the SET SHIP TYPE and press the [ENT] key.
[SET SHIP TYPE] |
|
TYPE NO : | 0 * |
* * * * TYPE DETAIL * * * *
NOT AVAILABLE
2.Press the [ENT] key and set number for ship type by using ▲ or ▼ key, referring to the table below.
Table: Ship type
No. | Ship type |
|
1 | Future use |
|
2 | WIG | WIG: Wing in ground |
3 | Vessel |
|
4 | HSC | HSC: High speed craft |
5 | Special craft |
|
6 | Passenger ships |
|
7 | Cargo ships |
|
8 | Tanker |
|
9 | Other type of ship |
|
(For details, see “§1.5 Setting Up for Voyage” on the operator’s manual.)
3. Press the [MENU] key to save the setting.
3.5 Setting I/O Port
Setting COM port/PC port
1.In the INITIAL SETTINGS window, press ▲ or ▼ key to choose the SET I/O PORT and press the [ENT] key.
[SET I/O PORT]
SETCOM1COMCOM1PORT
SET PC PORT
SET LAN PORT*1
SET PRIORITY
SET QUALITY*2
QUIT[MENU]
*1 Shown if fitted with LAN kit (option). *2 Shown if Inland AIS is incorporated.
SET I/O PORT menu
2. SET COM PORT is selected; press the [ENT] key.
22