1.2 Monitor Unit
The monitor unit can be installed on a desktop or flush mounted in a panel. Install it on the chart table or near the steering place, referring to the outline drawing.
When selecting a mounting location for the monitor unit, keep the following in mind:
•Keep the unit out of direct sunlight.
•The temperature and humidity should be moderate and stable. (Operating temperature range:
•Locate the unit away from exhaust pipes and vents.
•The mounting location should be well ventilated.
•Mount the unit where shock and vibration are minimal.
•Keep the unit away from electromagnetic field generating equipment such as motor, generator.
•For maintenance and checking purposes, leave sufficient space at the sides and rear of the unit and leave slack in cables. Refer to the outline drawing.
•A magnetic compass will be affected if the unit is placed too close to it. Observe the following compass safe distances to prevent disturbance to the magnetic compass:
Standard compass: 0.45 meters
Steering compass: 0.3 meters
Desktop mounting
1.Fasten the hanger with four
2.Fasten the monitor unit to the hanger with two knobs.
TabletopOverhead
Flush mounting
There are two types of flush mount kits, F type and S type. For details, see the outline diagrams at the back of this manual.
8