Furuno FA-150 installation manual Continuous

4.Press the [ENT] key, enter sub net mask in the SUB NET MASK field and press the [ENT] key. (Setting range: 000.000.000.000 to 255.255.255.255)

5.Press the [ENT] key, enter port number in the NAVNET PORT NO. field and press the [ENT] key. (Setting range: 10000 to 30000)

6.Press▼ to show next page.

[SET LAN PORT]	2/2
GATEWAY ADDRESS

000.000. 000. 000

HOST NAME : AISO

AISOUTPUT : CONTINUOUS

GPSOUTPUT : AUTO

ZDAOUTPUT : AUTO

7.Press the [ENT] key, enter gateway address in the GATEWAY ADDRESS field and press the [ENT] key. (Setting range: 000.000.000.000 to 255.255.255.255)

8.At the HOST NAME field, enter host name that is used in the NAVNET 3D(Setting range: AIS 0 to AIS 9) .

9.At the AIS OUTPUT field, set output condition.

AUTO: Auto-detect of where to output AIS data.

CONTINUOUS: AIS Output AIS data continuously.

10.At the GPS OUTPUT field, set GPS data (L/L, SOF, COG) output condition between AUTO and CONTINUOUS.

11.At the ZDA OUTPUT field, set time data output condition between AUTO and

CONTINUOUS.

12.Press the [MENU] key several times to save the settings and close the menu.

27