Furuno 1824C Setting speed for ETA calculation, Select speed for ETA window, Switching waypoints

Page 110

3. PLOTTER OPERATION

Setting speed for ETA calculation

Speed, which may be input manually or automatically, is required to calculate ETA (Estimated Time of Arrival) to a destination.

1.Press the MENU key to open the menu.

2.Press the WAYPOINTS/ROUTES soft key.

3.Press the LOG soft key.

4.Press the SPEED soft key.

SPEED FOR ETA

SPD 010.0kt

GPS AVG. SPEED

Select speed for ETA window

5.Enter speed manually in the SPD field, or use GPS speed data (if applicable) by selecting GPS AVG. SPEED.

6.Press the ENTER soft key or the ENTER knob to register your selection.

7.Press the MENU key to close the menu.

Switching waypoints

When you arrive to a waypoint on a route, you can switch to the next waypoint by one of the three methods below.

PERPENDICULAR: Automatically switches the destination waypoint when the boat comes passes an imaginary perpendicular line passing through the center of the destination waypoint or the boat comes within the arrival alarm range.

ARRVL ALM CRCL: Destination waypoint is automatically switched when the boat comes within the arrival alarm range. For how to set the arrival alarm, see the paragraph 3.11.2

Arrival alarm.

MANUAL: The destination waypoint may be manually switched by using the RESTART soft key (see page 3-44). This function is operative when “1 POINT” is selected as the GOTO method (see page 3-40).

WPT 2

WPT 2

Waypoint switched

Waypoint switched

at this point.

at this point.

WPT 1

WPT 1

Perpendicular

Arrival Alarm Circle

Automatic waypoint switching methods

3-45

Image 110
Contents Page Safety Instructions Table of Contents ARP IiiARP, TTM Data Transfer IN-1 AP-1SP-1 Declaration of ConformityFeatures Model Output Range Radar antenna size, type Rotation speedVii NavNet system Model 1824C/1834C/1934C/1944C/1954C/1964C ViiiNavNet system Model 1824C/1834C/1934C/1944C/1954C/1964C Single-unit NavNet system GD-1920C Single-unit NavNet system GD-1920CThree-or-more-unit NavNet system Max display units Two-unit NavNet systemTwo-unit NavNet system Three-or-more-unit NavNet systemDisplay unit controls Operating ControlsDisplay unit controls Radar and plotter displays Soft keysDisplay unit Operational OverviewKey Function Remote controllerKey Inserting a Chart Card Turning the Unit On/Off Display brilliance, panel brilliance Brilliance adjustment soft keysDisplay Brilliance, Panel Brilliance, Hue Display brilliance and panel brilliance windowsNight Day Twilight 2 HueHue window Display screens Selecting a DisplayDisplay modes Screen type and available display screenRadar combination screen selection window Selecting a displayDisplay screen selection window Switching control in combination and overlay screens To adjust Sounder PlotterRadar source and sounder source windows Selecting image sourceSelect source menu Trackball, Cursor Cursor, cursor dataMOB mark messages Entering the MOB Mark, Setting MOB as DestinationMOB concept Rearranging data boxes Data BoxesShowing, hiding data boxes with soft key Temporarily erasing a data boxExecuting a function Function Default Setting, Key LabelFunction Keys Function keysRadar Simulation setup menuSimulation Display Plotter SounderThis page intentionally left blank Radar display Radar DisplayTransmitting, Stand-by Tuning window TuningAdjusting the Gain Gain sensitivity windowEffect of A/C SEA Reducing Sea ClutterHow the A/C SEA works SEA setting window Adjusting the A/C SEAAdjusting the A/C Rain Rain setting windowRange scales nm, sm Range ScalePulselength Range scales kmSignal process soft keys Presentation ModeSelecting a presentation mode Function Indicator on display Soft key labelCourse-up Description of presentation modesHead-up North-upMeasuring range by range rings How to measure range to a target with the cursorMeasuring the Range Measuring range by cursorVarious VRM operations How to measure range with the VRMMeasuring range by VRM Measuring bearing by EBL Measuring the BearingMeasuring bearing by cursor Various EBL operationsRejecting Radar Interference Erasing the Heading Line, North MarkerReducing Noise Interference Radar interferenceZoom Zooming radar targetsTarget no. selection window Zooming ARP, TTM targetsZoom Manual shift Setting automatic shift maximum speedShifting the Picture Automatic shiftPredicting collision course with the offset EBL Using the Offset EBLPredicting collision course Measuring range & bearing between two targets Measuring range and bearing between two targetsSample echo trails Echo TrailsTrail time Trail soft keysTrail color Starting echo trailsTrail gradation Multitone and monotone trailsEcho Stretch Echo trail modeTrail mode window Echo Averaging Effect of echo averagingOutputting TLL Data Target soft keysHow to set a guard alarm zone Guard AlarmSetting a guard alarm zone Watchman When the alarm is violated…Cancelling the guard alarm How watchman worksWatchman time window Setting watchman stand-by intervalSuppressing Second-trace Echoes Second-trace echoesWaypoint Marker Waypoint markerUsage precautions for ARP 26 ARP, TTM OperationAcquiring and tracking targets ARP ARP setup menuActivating/deactivating ARP, TTM ARP Target Info windowAutomatic acquisition area window ARP plot symbolsAutomatic acquisition Terminating tracking of selected targets Displaying target number ARP, TTMTerminating tracking of ARP targets Terminating tracking of all targetsVector reference, vector time Setting vector attributes ARPWhat is a vector? Past position displays Displaying past position ARP26.7 ARP, TTM target data History interval window26.8 CPA/TCPA alarm ARP ARP target dataLost target mark Lost target alarm ARPCanceling a lost target Multiple echoes Interpreting the Radar DisplayFalse echoes Sidelobe echoesShadow sector Appearance of Sart signal on the radar displaySart Search and Rescue Transponder Racon Radar Beacon General procedure for detecting Sart responseAppearance of racon signal on the radar display Full-screen plotter display Plotter DisplaysFull-screen plotter display Nav data windowContents of nav data window Plotter OperationCompass display Nav graphic displayCompass display Reading the XTE cross-track error monitor XTE range setting windowAnemometer display Anemometer displayHighway display Highway displayNav data display Nav data displaysNorth-up Auto course-upPerspective C-map only Course-upChart card overview Chart ScaleChart Cards Shifting the DisplayWhen a chart cannot be displayed Indices and chart enlargementSample chart Japan, showing indices Plotter display, showing port service display Navionics chartsPort service icons Data for aids to navigationObject information Current or tide dataCurrent data display Object information windowFind function Find windowObjects window MAP chartsCursor and data display Example of caution area windowObject windows Icon dataLighthouse icon Tide window Sample lighthouse dataTide information Map, port service display Date windowOwn ship track Working with TrackDisplaying track Track control menuOwn ship’s track Stopping, restarting plotting of own ship trackChanging track color Track plotting method Track plotting method and interval for own ship trackOwn ship track color window Interval windowInterval windows Changing own ship track/mark distribution settingTrack plotting interval Track memory windowErase menu Erasing trackErasing own ship track by area Erasing own ship track by colorErase track by color window Marks, LinesEntering a mark, line Erasing all own ship trackMarks & lines menu Changing mark attributesSelecting line type Marks shape windowErasing an individual mark Erasing marks, linesLines style window Erasing an individual lineErasing all marks, lines WaypointsEntering waypoints Entering a waypoint at own ship positionWaypoint mark color selection window Waypoint windowWaypoint mark shape selection window P T Entering a waypoint by range and bearingAlphanumeric and local waypoint lists Editing waypoint dataEntering a waypoint from the waypoint list Editing waypoint data from the waypoint listPlotter display Erasing waypointsEditing a waypoint from the plotter display Erasing a waypoint directly from the plotter displayErasing a waypoint from the menu Chart details menuChanging waypoint mark size Navionics Gold Erasing a waypoint from the waypoint listSearching waypoints Alphanumeric listEntering a route with existing waypoints RoutesCreating routes Route menuCreating voyage-based routes New route entry screenEntering a route with the cursor Displays for entry of time, distance interval Save route menuSave route window Connecting routes Connect route windowEdit route menu Inserting waypointsInserting a waypoint from the route list Waypoint list for editing a Route local listRemoving a waypoint from the route list Removing waypoints from a routeInserting a waypoint from the plotter display Removing a waypoint from the plotter displayNavigating to a quick point NavigationErasing routes Selecting quick point entry methodNavigating to multiple quick points Navigating to waypointsNavigating to a single quick point Selecting a waypoint from the plotter displayQP window Navigating to ports, port services NavChartTM onlySelecting an external waypoint Port services and sample port list Select ServicePlotter display, route selected as destination Following a routeSelecting the route to follow Navigating waypoints in reverse orderLog display Example of when to restart navigationRestarting navigation Automatic waypoint switching methods Setting speed for ETA calculationSwitching waypoints Select speed for ETA windowOn the plotter display Canceling route navigationThrough the menu Plotter alarm menu AlarmsAudio alarm on/off Audio alarm windowArrival alarm window Arrival alarmHow the arrival alarm works Anchor watch alarm window Anchor watch alarmHow the anchor watch alarm works How the XTE alarm works XTE Cross-Track Error alarmSpeed alarm XTE alarm windowProximity alarm window Proximity alarmTrip alarm Trip alarm windowGrounding alarm C-MAP specification Grounding alarm windowAlarm information Plotter alarm menu,Message Meaning Alarm messagesPlotter alarm messages and their meanings Resetting Trip Distance General setup menu,This page intentionally left blank Selecting a sounder display Display mode windowSounder Displays Indications on the single frequency display Description of sounder displaysSingle-frequency display Dual-frequency displayMarker-zoom display plus normal sounder display Sounding area and transmission frequencyMarker-zoom display Bottom-lock display Bottom-zoom displayBottom-zoom display plus normal sounder display Bottom-lock display plus normal sounder displayScope display display only Bottom discrimination displayBottom discrimination display Scope displayHow the automatic sounder works Automatic Sounder OperationSelecting screen split method in combination displays Types of automatic sounder modesManual Sounder Operation How to enable automatic sounder operationSelecting the manual mode Selecting display rangeExamples of proper and improper gain Adjusting the gainShifting the range Gain windowReducing Interference How to measure depth and timeMeasuring Depth, Time Types of interferenceAppearance of clutter Reducing Low Level NoiseNoise limiter window Clutter windowAppearance of weak echoes Signal level windowErasing Weak Echoes Picture Advance Speed Color bar 16 color when white marker function is activeWhite Marker Advancement independent of ship’s speedAdvancement synchronized with ship’s speed Picture advance windowHue No Echo Color Background Color Display ColorsHue no. and background and echo colors Sounder alarm menu Alarm audio windowBottom alarm window Bottom alarmFish alarm Fish alarm windowFish alarm B/L window Fish alarm B/LWater temperature alarm Water temperature alarm windowDepth Alarm When an alarm setting is violatedSounder alarm messages and their meanings Fish AlarmSaving Sounder Picture to an SD Card Water Temperature GraphChanging Pulse Repetition Rate Bottom echo Interpreting the Sounder DisplayZero line Zero lineFish school echoes Fish school echoesSurface noise/Aeration Surface noise/aerationThis page intentionally left blank Turning AIS Feature On/Off AIS Option menuAIS Operation AIS Display Mode windowVector mode AIS symbols AIS SymbolsSetting Number of AIS Targets to Display Symbol DescriptionAIS target data display Activating TargetsDisplaying Target Data Lost target Setting CPA and TcpaLost Target Confirming a lost targetTcpa window Proximity AlarmCPA window AIS vector time window Showing, Hiding AIS Target TracksChoosing Vector Time Displaying Past Positions of AIS Targets AIS past position displaysSave data menu Deleting all data other than chart data from memory cardsMemory Card Operations Data TransferMemory card messages Saving data to a memory cardMemory card messages Message Reason RemedyPlaying back data from a memory card Load data menuUploading or downloading data Setting communication software on the PCUploading, Downloading Data Upload and download menusWaypoint data format Baud rate windowWaypoint data format Characters available for commentEnd of sentence Route data menuRoute comment data format Mark data format Loading Waypoint Data from YeomanMark data format Host name window Receiving Data Via Network EquipmentReceive data menu Marks & lines windowOutputting Data Through the Network Select sentence menuThis page intentionally left blank General Setup General setup menuContents of general setup menu Contents of general setup menu con’t from previous Radar display setup menu Radar SetupRadar display setup AIS OptionContents of radar display setup menu Con’t on nextContents of radar display setup menu con’t from previous Model Maximum Range Radar range setupRadar range setup menu Radar function key menu Function key setupFunction Key Default Function Radar function key optionsRadar function keys Menu Item Function Function Key LabelNavigation options Plotter SetupPlotter setup menu Contents of plotter setup menu Plotter function key menu TRK EML RUL ADD ALPPlotter function keys Plotter display, chart offset selected Chart SetupChart offset Navionics Gold chart attributes Chart configuration menu C-MAP MAP chart attributesDisplaying the Chart Configuration menu Contour Line Soft keyObject Content Settings Description Chart Configuration menu descriptionChart Configuration menu description Chart Configuration menu description con’t from previous Object Content Setting DescriptionNormal or U.ZOOM or O.ZOOM Depth Config menu description Depth Config soft keyDepth Config menu Data box menu Data Boxes SetupSetting Setting Range Default Setting Show fromData Boxes Setup Hot Page Setup Hot page setup menuNavigation data source Navigator SetupHot page setup menu, Split X 3 screen, sub screen selection Contents of nav setup menu GPS receiver setup Set equipped with GP-310B/320B GPS setup menu Contents of GPS setup menuContents of GPS setup menu con’t on previous GPS Status TD setup menu TD display setupContents of Waas Setup menu Loran C GRI & station pair window Displaying Loran C TDsLoran GRI & station pair window Displaying Decca TDsNav Data Display Setup Nav data setup screenNav data setup window Sounder SetupSystem setup Sounder system setup menuHF,LF Sounder system setup menu descriptionTVG SM1-SM4, OFFSounder system setup menu description con’t from previous Sensor setup menu settings Sensor setupSensor setup menu Setting range for default Default SettingSounding range, zoom range, bottom lock range Sounder range setup menuDefault basic ranges Zoom range and bottom-lock rangesTLL CLT SLV Sounder function key menuSounder function key options Sounder function keys Graphic meter window Nav Graphic Display SetupNAV Graphic menu Depth graph up-date windowCheck point Remedy Preventive MaintenanceMaintenance program LCDBattery on circuit board Replacement of BatteriesReplacement of Fuse Batteries in remote controllerReplacing the Synchro Belt 1824C only Trackball MaintenanceReplacing the Magnetron Radar model and magnetron usedRadar troubleshooting Simple TroubleshootingGeneral troubleshooting GeneralPlotter troubleshooting PlotterSounder troubleshooting SounderMemory I/O Test menu DiagnosticsMemory I/O test GPS sensor test Requires GPS Receiver GP-310B/320B Display unit testDisplay unit test results GPS receiver test resultsNetwork sounder test results ARP test resultsTest pattern Test pattern sequenceKeyboard, remote controller test Screen for testing keyboard, remote controllerGPS Status Display GPS status displayWindows for clearing memory Clearing MemoriesMemory clear menu Error Message Meaning Remedy General Error MessagesError messages Heading Data MissingMenu Overview AP-1AP-2 AppendixSetup AP-3NAV Graphic Display Setup AP-4AP-5 PlotterDepth Config soft key AP-6AP-7 AP-8 Zoom Marker ON, OFF HUE 1-9Plotter Alarms Alarm keyRadar Alarms Sounder AlarmsGeodetic Chart List AP-10Icon Meaning IconsAP-11 AP-12 Specifications of Marine Radar Model 18x4C/19x4C SeriesTransceiver Module Display Unit Plotter Function Environmental Condition Specifications of Video Plotter GD-1920C Index IN-1IN-2 IndexIN-3 MessagesTD setup IN-4Page Page
Related manuals
Manual 91 pages 5.55 Kb