Furuno 1824C manual Uploading, Downloading Data, Setting communication software on the PC

Page 155

6. DATA TRANSFER

6.2Uploading, Downloading Data

You can upload/download waypoints, routes, marks and lines from/to a PC, through the DATA 4 port at the rear of the display unit. Note that radar and sounder data cannot be uploaded or downloaded.

6.2.1Setting communication software on the PC

The communication format (RS-232C) with the PC is as follows:

Baud Rate:	4800 bps
Character Length:	8 bits
Stop bit:	1 bit
Parity:	None
X Control:	XON/XOFF (fixed)

The following data can be downloaded/uploaded between a PC and this equipment: Waypoint data (In alphanumeric order)

Route data (In order of route number)

End of sentence

Note 1: There are two kinds of data for route data: route data and route comment data.

Note 2: DGPS position fix is not available when uploading or downloading data.

Note 3: Wiring information appears on the UPLOAD or DOWNLOAD menu.

6.2.2Uploading or downloading data

1.Connect the PC to the equipment.

2.Press the MENU key to show the main menu.

3.Press the SYSTEM CONFIGURATION soft key.

4.Press the DATA TRANSFER soft key.

5.Press the UPLOAD/DOWNLOAD DATA soft key.

6.Press the DOWNLOAD WPT/ROUTE TO PC or UPLOAD WPT/ROUTE FROM PC soft key.

▲ WAYPOINT & ROUTES OFF
MARKS & LINES	OFF

RS232C SETTINGS

·4800BPS,

·7BIT, ·1STOP BIT,

·PARITY EVEN,

·CONTROL Xon/Xoff

WIRING INFORMATION DISPLAY UNIT PC: DSUB9 TxD >1>-WHITE-<2<RD RxD >2>-BLUE -<3<SD

RD-A	>3>-YELLOW
RD-B	>4>-GREEN
+12V	>5>-RED
EXT BUZZ >6>-BLACK
GND	>7>-SHIELD-<5<SG

UPLOAD

EDIT

UPLOAD

SELECT

BPS

RETURN

▲ WAYPOINT & ROUTES OFF
MARKS & LINES	OFF

RS232C SETTINGS

·4800BPS,

·7BIT, ·1STOP BIT,

·PARITY EVEN,

·CONTROL Xon/Xoff

WIRING INFORMATION DISPLAY UNIT PC: DSUB9 TxD >1>-WHITE-<2<RD RxD >2>-BLUE -<3<SD

RD-A	>3>-YELLOW
RD-B	>4>-GREEN
+12V	>5>-RED
EXT BUZZ >6>-BLACK
GND	>7>-SHIELD-<5<SG

DOWN-

LOAD

EDIT

DWLOAD

SELECT

BPS

RETURN

Upload and download menus

7. To change the baud rate, press the SELECT BPS soft key.

6-4

Image 155

Contents Page Safety Instructions Table of Contents ARP IiiARP, TTM Data Transfer Declaration of Conformity AP-1SP-1 IN-1Model Output Range Radar antenna size, type Rotation speed FeaturesVii NavNet system Model 1824C/1834C/1934C/1944C/1954C/1964C ViiiNavNet system Model 1824C/1834C/1934C/1944C/1954C/1964C Single-unit NavNet system GD-1920C Single-unit NavNet system GD-1920CThree-or-more-unit NavNet system Two-unit NavNet systemTwo-unit NavNet system Three-or-more-unit NavNet system Max display unitsDisplay unit controls Operating ControlsDisplay unit controls Operational Overview Soft keysDisplay unit Radar and plotter displaysKey Function Remote controllerKey Inserting a Chart Card Turning the Unit On/Off Display brilliance and panel brilliance windows Brilliance adjustment soft keysDisplay Brilliance, Panel Brilliance, Hue Display brilliance, panel brillianceNight Day Twilight 2 HueHue window Screen type and available display screen Selecting a DisplayDisplay modes Display screensRadar combination screen selection window Selecting a displayDisplay screen selection window To adjust Sounder Plotter Switching control in combination and overlay screensRadar source and sounder source windows Selecting image sourceSelect source menu Cursor, cursor data Trackball, CursorMOB mark messages Entering the MOB Mark, Setting MOB as DestinationMOB concept Temporarily erasing a data box Data BoxesShowing, hiding data boxes with soft key Rearranging data boxesFunction keys Function Default Setting, Key LabelFunction Keys Executing a functionRadar Simulation setup menuSimulation Display Sounder PlotterThis page intentionally left blank Radar display Radar DisplayTransmitting, Stand-by Gain sensitivity window TuningAdjusting the Gain Tuning windowEffect of A/C SEA Reducing Sea ClutterHow the A/C SEA works Rain setting window Adjusting the A/C SEAAdjusting the A/C Rain SEA setting windowRange scales km Range ScalePulselength Range scales nm, smFunction Indicator on display Soft key label Presentation ModeSelecting a presentation mode Signal process soft keysNorth-up Description of presentation modesHead-up Course-upMeasuring range by cursor How to measure range to a target with the cursorMeasuring the Range Measuring range by range ringsVarious VRM operations How to measure range with the VRMMeasuring range by VRM Various EBL operations Measuring the BearingMeasuring bearing by cursor Measuring bearing by EBLRadar interference Erasing the Heading Line, North MarkerReducing Noise Interference Rejecting Radar InterferenceZooming radar targets ZoomTarget no. selection window Zooming ARP, TTM targetsZoom Automatic shift Setting automatic shift maximum speedShifting the Picture Manual shiftPredicting collision course with the offset EBL Using the Offset EBLPredicting collision course Measuring range and bearing between two targets Measuring range & bearing between two targetsTrail soft keys Echo TrailsTrail time Sample echo trailsMultitone and monotone trails Starting echo trailsTrail gradation Trail colorEcho Stretch Echo trail modeTrail mode window Effect of echo averaging Echo AveragingTarget soft keys Outputting TLL DataHow to set a guard alarm zone Guard AlarmSetting a guard alarm zone How watchman works When the alarm is violated…Cancelling the guard alarm WatchmanSecond-trace echoes Setting watchman stand-by intervalSuppressing Second-trace Echoes Watchman time windowWaypoint marker Waypoint Marker26 ARP, TTM Operation Usage precautions for ARPARP Target Info window ARP setup menuActivating/deactivating ARP, TTM Acquiring and tracking targets ARPAutomatic acquisition area window ARP plot symbolsAutomatic acquisition Terminating tracking of all targets Displaying target number ARP, TTMTerminating tracking of ARP targets Terminating tracking of selected targetsVector reference, vector time Setting vector attributes ARPWhat is a vector? History interval window Displaying past position ARP26.7 ARP, TTM target data Past position displaysARP target data 26.8 CPA/TCPA alarm ARPLost target mark Lost target alarm ARPCanceling a lost target Sidelobe echoes Interpreting the Radar DisplayFalse echoes Multiple echoesShadow sector Appearance of Sart signal on the radar displaySart Search and Rescue Transponder Racon Radar Beacon General procedure for detecting Sart responseAppearance of racon signal on the radar display Nav data window Plotter DisplaysFull-screen plotter display Full-screen plotter displayPlotter Operation Contents of nav data windowCompass display Nav graphic displayCompass display XTE range setting window Reading the XTE cross-track error monitorAnemometer display Anemometer displayHighway display Highway displayNav data displays Nav data displayCourse-up Auto course-upPerspective C-map only North-upShifting the Display Chart ScaleChart Cards Chart card overviewWhen a chart cannot be displayed Indices and chart enlargementSample chart Japan, showing indices Data for aids to navigation Navionics chartsPort service icons Plotter display, showing port service displayObject information window Current or tide dataCurrent data display Object informationFind window Find functionExample of caution area window MAP chartsCursor and data display Objects windowObject windows Icon dataLighthouse icon Tide window Sample lighthouse dataTide information Date window Map, port service displayTrack control menu Working with TrackDisplaying track Own ship trackOwn ship’s track Stopping, restarting plotting of own ship trackChanging track color Interval window Track plotting method and interval for own ship trackOwn ship track color window Track plotting methodTrack memory window Changing own ship track/mark distribution settingTrack plotting interval Interval windowsErasing own ship track by color Erasing trackErasing own ship track by area Erase menuErasing all own ship track Marks, LinesEntering a mark, line Erase track by color windowMarks shape window Changing mark attributesSelecting line type Marks & lines menuErasing an individual line Erasing marks, linesLines style window Erasing an individual markEntering a waypoint at own ship position WaypointsEntering waypoints Erasing all marks, linesWaypoint mark color selection window Waypoint windowWaypoint mark shape selection window Entering a waypoint by range and bearing P TEditing waypoint data from the waypoint list Editing waypoint dataEntering a waypoint from the waypoint list Alphanumeric and local waypoint listsErasing a waypoint directly from the plotter display Erasing waypointsEditing a waypoint from the plotter display Plotter displayErasing a waypoint from the waypoint list Chart details menuChanging waypoint mark size Navionics Gold Erasing a waypoint from the menuAlphanumeric list Searching waypointsRoute menu RoutesCreating routes Entering a route with existing waypointsCreating voyage-based routes New route entry screenEntering a route with the cursor Displays for entry of time, distance interval Save route menuSave route window Connect route window Connecting routesWaypoint list for editing a Route local list Inserting waypointsInserting a waypoint from the route list Edit route menuRemoving a waypoint from the plotter display Removing waypoints from a routeInserting a waypoint from the plotter display Removing a waypoint from the route listSelecting quick point entry method NavigationErasing routes Navigating to a quick pointSelecting a waypoint from the plotter display Navigating to waypointsNavigating to a single quick point Navigating to multiple quick pointsQP window Navigating to ports, port services NavChartTM onlySelecting an external waypoint Select Service Port services and sample port listNavigating waypoints in reverse order Following a routeSelecting the route to follow Plotter display, route selected as destinationLog display Example of when to restart navigationRestarting navigation Select speed for ETA window Setting speed for ETA calculationSwitching waypoints Automatic waypoint switching methodsOn the plotter display Canceling route navigationThrough the menu Audio alarm window AlarmsAudio alarm on/off Plotter alarm menuArrival alarm window Arrival alarmHow the arrival alarm works Anchor watch alarm window Anchor watch alarmHow the anchor watch alarm works XTE alarm window XTE Cross-Track Error alarmSpeed alarm How the XTE alarm worksTrip alarm window Proximity alarmTrip alarm Proximity alarm windowGrounding alarm window Grounding alarm C-MAP specificationPlotter alarm menu, Alarm informationMessage Meaning Alarm messagesPlotter alarm messages and their meanings General setup menu, Resetting Trip DistanceThis page intentionally left blank Selecting a sounder display Display mode windowSounder Displays Dual-frequency display Description of sounder displaysSingle-frequency display Indications on the single frequency displayMarker-zoom display plus normal sounder display Sounding area and transmission frequencyMarker-zoom display Bottom-lock display plus normal sounder display Bottom-zoom displayBottom-zoom display plus normal sounder display Bottom-lock displayScope display Bottom discrimination displayBottom discrimination display Scope display display onlyTypes of automatic sounder modes Automatic Sounder OperationSelecting screen split method in combination displays How the automatic sounder worksSelecting display range How to enable automatic sounder operationSelecting the manual mode Manual Sounder OperationGain window Adjusting the gainShifting the range Examples of proper and improper gainTypes of interference How to measure depth and timeMeasuring Depth, Time Reducing InterferenceClutter window Reducing Low Level NoiseNoise limiter window Appearance of clutterAppearance of weak echoes Signal level windowErasing Weak Echoes Advancement independent of ship’s speed Color bar 16 color when white marker function is activeWhite Marker Picture Advance SpeedPicture advance window Advancement synchronized with ship’s speedHue No Echo Color Background Color Display ColorsHue no. and background and echo colors Alarm audio window Sounder alarm menuFish alarm window Bottom alarmFish alarm Bottom alarm windowWater temperature alarm window Fish alarm B/LWater temperature alarm Fish alarm B/L windowFish Alarm When an alarm setting is violatedSounder alarm messages and their meanings Depth AlarmSaving Sounder Picture to an SD Card Water Temperature GraphChanging Pulse Repetition Rate Zero line Interpreting the Sounder DisplayZero line Bottom echoSurface noise/aeration Fish school echoesSurface noise/Aeration Fish school echoesThis page intentionally left blank AIS Option menu Turning AIS Feature On/OffAIS Operation AIS Display Mode windowVector mode Symbol Description AIS SymbolsSetting Number of AIS Targets to Display AIS symbolsAIS target data display Activating TargetsDisplaying Target Data Confirming a lost target Setting CPA and TcpaLost Target Lost targetTcpa window Proximity AlarmCPA window AIS vector time window Showing, Hiding AIS Target TracksChoosing Vector Time AIS past position displays Displaying Past Positions of AIS TargetsData Transfer Deleting all data other than chart data from memory cardsMemory Card Operations Save data menuMessage Reason Remedy Saving data to a memory cardMemory card messages Memory card messagesLoad data menu Playing back data from a memory cardUpload and download menus Setting communication software on the PCUploading, Downloading Data Uploading or downloading dataCharacters available for comment Baud rate windowWaypoint data format Waypoint data formatEnd of sentence Route data menuRoute comment data format Mark data format Loading Waypoint Data from YeomanMark data format Marks & lines window Receiving Data Via Network EquipmentReceive data menu Host name windowSelect sentence menu Outputting Data Through the NetworkThis page intentionally left blank General setup menu General SetupContents of general setup menu Contents of general setup menu con’t from previous AIS Option Radar SetupRadar display setup Radar display setup menuCon’t on next Contents of radar display setup menuContents of radar display setup menu con’t from previous Model Maximum Range Radar range setupRadar range setup menu Radar function key options Function key setupFunction Key Default Function Radar function key menuMenu Item Function Function Key Label Radar function keysNavigation options Plotter SetupPlotter setup menu Contents of plotter setup menu TRK EML RUL ADD ALP Plotter function key menuPlotter function keys Plotter display, chart offset selected Chart SetupChart offset Navionics Gold chart attributes Contour Line Soft key MAP chart attributesDisplaying the Chart Configuration menu Chart configuration menu C-MAPObject Content Settings Description Chart Configuration menu descriptionChart Configuration menu description Object Content Setting Description Chart Configuration menu description con’t from previousNormal or U.ZOOM or O.ZOOM Depth Config menu description Depth Config soft keyDepth Config menu Show from Data Boxes SetupSetting Setting Range Default Setting Data box menuData Boxes Setup Hot page setup menu Hot Page SetupNavigation data source Navigator SetupHot page setup menu, Split X 3 screen, sub screen selection Contents of nav setup menu GPS setup menu Contents of GPS setup menu GPS receiver setup Set equipped with GP-310B/320BContents of GPS setup menu con’t on previous GPS Status TD setup menu TD display setupContents of Waas Setup menu Displaying Decca TDs Displaying Loran C TDsLoran GRI & station pair window Loran C GRI & station pair windowNav data setup screen Nav Data Display SetupSounder system setup menu Sounder SetupSystem setup Nav data setup windowSM1-SM4, OFF Sounder system setup menu descriptionTVG HF,LFSounder system setup menu description con’t from previous Setting range for default Default Setting Sensor setupSensor setup menu Sensor setup menu settingsZoom range and bottom-lock ranges Sounder range setup menuDefault basic ranges Sounding range, zoom range, bottom lock rangeTLL CLT SLV Sounder function key menuSounder function key options Sounder function keys Depth graph up-date window Nav Graphic Display SetupNAV Graphic menu Graphic meter windowLCD Preventive MaintenanceMaintenance program Check point RemedyBatteries in remote controller Replacement of BatteriesReplacement of Fuse Battery on circuit boardRadar model and magnetron used Trackball MaintenanceReplacing the Magnetron Replacing the Synchro Belt 1824C onlyGeneral Simple TroubleshootingGeneral troubleshooting Radar troubleshootingPlotter Plotter troubleshootingSounder Sounder troubleshootingMemory I/O Test menu DiagnosticsMemory I/O test GPS receiver test results Display unit testDisplay unit test results GPS sensor test Requires GPS Receiver GP-310B/320BARP test results Network sounder test resultsTest pattern sequence Test patternScreen for testing keyboard, remote controller Keyboard, remote controller testGPS status display GPS Status DisplayWindows for clearing memory Clearing MemoriesMemory clear menu Heading Data Missing Error MessagesError messages Error Message Meaning Remedy GeneralAP-1 Menu OverviewAppendix AP-2AP-3 SetupAP-4 NAV Graphic Display SetupPlotter AP-5AP-6 Depth Config soft keyAP-7 Zoom Marker ON, OFF HUE 1-9 AP-8Sounder Alarms Alarm keyRadar Alarms Plotter AlarmsAP-10 Geodetic Chart ListIcon Meaning IconsAP-11 AP-12 Model 18x4C/19x4C Series Specifications of Marine RadarTransceiver Module Display Unit Plotter Function Environmental Condition Specifications of Video Plotter GD-1920C IN-1 IndexIndex IN-2Messages IN-3IN-4 TD setupPage Page

Related manuals

Manual 91 pages 5.55 Kb