Furuno 1824C manual Stopping, restarting plotting of own ship track, Changing track color

Page 84

3. PLOTTER OPERATION

10.Use the Trackball to select one of the following:

ON or OFF (no ARP or AIS): Turn on or off target tracks

ARP ONLY (ARP equipped): Show only ARP tracks.

AIS ONLY (AIS equipped): Show only AIS tracks.

BOTH: Show both ARP and AIS tracks.

11.Press the ENTER soft key.

12.Press the MENU key to close the menu.

3.6.2Stopping, restarting plotting of own ship track

When your boat is at anchor or returning to port you probably won’t need to record its track. You can stop recording the track, to conserve the track memory, as follows:

1.Press the MENU key followed by the CHART SETUP and TRACKS & MARKS CONTROL soft keys to open the TRACK CONTROL menu.

OWN SHIP TRACK DISP

ON

OWN SHIP TRACK COLOR

RED

TARGET TRACK DISPLAY

ON

TARGET TRACK COLOR

WHITE

INTERVAL

TIME

TIME INTERVAL

00m10s

DISTANCE INTERVAL

00.10nm

MEMORY(TRACK & MARK)

2000 POINTS

(MARK MEMORY)

(6000)POINTS

 

 

SHIP'S TRACK STATUS

TRACKING

TRACK: 1234/2000

MARK : 9/6000

TRACK CONTROL

EDIT

TRACK

RESUME

ERASE

T & M

MARK

SETUP

RETURN

TRACK

RESUME

TRACK

HALT

OWN SHIP TRACK DISP

ON

OWN SHIP TRACK COLOR

RED

TARGET TRACK DISPLAY

ON

TARGET TRACK COLOR

WHITE

INTERVAL

TIME

TIME INTERVAL

00m10s

DISTANCE INTERVAL

00.10nm

MEMORY(TRACK & MARK)

2000 POINTS

(MARK MEMORY)

(6000)POINTS

 

 

SHIP'S TRACK STATUS

NOT TRACKING

TRACK: 1234/2000

MARK : 9/6000

TRACK CONTROL

EDIT

TRACK

HALT

ERASE

T & M

MARK

SETUP

RETURN

Track is plotted

Track not plotted

Track control menu

2.Press the TRACK RESUME soft key. The soft key now shows “TRACK HALT” and the indication “TRACKING” in the SHIP’S TRACK STATUS window changes to “NOT TRACKING.” In addition, the icon “H” is displayed at the top of the plotter display and own ship marker becomes a hollow circle. To restart plotting the track, press the TRACK HALT soft key

3.Press the MENU key to close the menu.

3.6.3Changing track color

Track can be displayed in red (default setting), yellow, green, light-blue, purple, blue and white. It can be useful to change track color on a regular basis to discriminate between previous day’s track, etc.

Own ship’s track

1.Press the MENU key followed by the CHART SETUP and TRACKS & MARKS CONTROL soft keys to open the TRACK CONTROL menu.

2.Use the Trackball to select OWN SHIP TRACK COLOR.

3.Press the EDIT soft key to display the track color window.

3-19

Image 84
Contents Page Safety Instructions Table of Contents Iii ARP, TTMARP Data Transfer AP-1 SP-1IN-1 Declaration of ConformityFeatures Model Output Range Radar antenna size, type Rotation speedVii Viii NavNet system Model 1824C/1834C/1934C/1944C/1954C/1964CNavNet system Model 1824C/1834C/1934C/1944C/1954C/1964C Single-unit NavNet system GD-1920C Single-unit NavNet system GD-1920CTwo-unit NavNet system Two-unit NavNet systemThree-or-more-unit NavNet system Max display units Three-or-more-unit NavNet systemOperating Controls Display unit controlsDisplay unit controls Soft keys Display unitRadar and plotter displays Operational OverviewRemote controller KeyKey Function Inserting a Chart Card Turning the Unit On/Off Brilliance adjustment soft keys Display Brilliance, Panel Brilliance, HueDisplay brilliance, panel brilliance Display brilliance and panel brilliance windows2 Hue Hue windowNight Day Twilight Selecting a Display Display modesDisplay screens Screen type and available display screenSelecting a display Display screen selection windowRadar combination screen selection window Switching control in combination and overlay screens To adjust Sounder PlotterSelecting image source Select source menuRadar source and sounder source windows Trackball, Cursor Cursor, cursor dataEntering the MOB Mark, Setting MOB as Destination MOB conceptMOB mark messages Data Boxes Showing, hiding data boxes with soft keyRearranging data boxes Temporarily erasing a data boxFunction Default Setting, Key Label Function KeysExecuting a function Function keysSimulation setup menu Simulation DisplayRadar Plotter SounderThis page intentionally left blank Radar Display Transmitting, Stand-byRadar display Tuning Adjusting the GainTuning window Gain sensitivity windowReducing Sea Clutter How the A/C SEA worksEffect of A/C SEA Adjusting the A/C SEA Adjusting the A/C RainSEA setting window Rain setting windowRange Scale PulselengthRange scales nm, sm Range scales kmPresentation Mode Selecting a presentation modeSignal process soft keys Function Indicator on display Soft key labelDescription of presentation modes Head-upCourse-up North-upHow to measure range to a target with the cursor Measuring the RangeMeasuring range by range rings Measuring range by cursorHow to measure range with the VRM Measuring range by VRMVarious VRM operations Measuring the Bearing Measuring bearing by cursorMeasuring bearing by EBL Various EBL operationsErasing the Heading Line, North Marker Reducing Noise InterferenceRejecting Radar Interference Radar interferenceZoom Zooming radar targetsZooming ARP, TTM targets ZoomTarget no. selection window Setting automatic shift maximum speed Shifting the PictureManual shift Automatic shiftUsing the Offset EBL Predicting collision coursePredicting collision course with the offset EBL Measuring range & bearing between two targets Measuring range and bearing between two targetsEcho Trails Trail timeSample echo trails Trail soft keysStarting echo trails Trail gradationTrail color Multitone and monotone trailsEcho trail mode Trail mode windowEcho Stretch Echo Averaging Effect of echo averagingOutputting TLL Data Target soft keysGuard Alarm Setting a guard alarm zoneHow to set a guard alarm zone When the alarm is violated… Cancelling the guard alarmWatchman How watchman worksSetting watchman stand-by interval Suppressing Second-trace EchoesWatchman time window Second-trace echoesWaypoint Marker Waypoint markerUsage precautions for ARP 26 ARP, TTM OperationARP setup menu Activating/deactivating ARP, TTMAcquiring and tracking targets ARP ARP Target Info windowARP plot symbols Automatic acquisitionAutomatic acquisition area window Displaying target number ARP, TTM Terminating tracking of ARP targetsTerminating tracking of selected targets Terminating tracking of all targetsSetting vector attributes ARP What is a vector?Vector reference, vector time Displaying past position ARP 26.7 ARP, TTM target dataPast position displays History interval window26.8 CPA/TCPA alarm ARP ARP target dataLost target alarm ARP Canceling a lost targetLost target mark Interpreting the Radar Display False echoesMultiple echoes Sidelobe echoesAppearance of Sart signal on the radar display Sart Search and Rescue TransponderShadow sector General procedure for detecting Sart response Appearance of racon signal on the radar displayRacon Radar Beacon Plotter Displays Full-screen plotter displayFull-screen plotter display Nav data windowContents of nav data window Plotter OperationNav graphic display Compass displayCompass display Reading the XTE cross-track error monitor XTE range setting windowAnemometer display Anemometer displayHighway display Highway displayNav data display Nav data displaysAuto course-up Perspective C-map onlyNorth-up Course-upChart Scale Chart CardsChart card overview Shifting the DisplayIndices and chart enlargement Sample chart Japan, showing indicesWhen a chart cannot be displayed Navionics charts Port service iconsPlotter display, showing port service display Data for aids to navigationCurrent or tide data Current data displayObject information Object information windowFind function Find windowMAP charts Cursor and data displayObjects window Example of caution area windowIcon data Lighthouse iconObject windows Sample lighthouse data Tide informationTide window Map, port service display Date windowWorking with Track Displaying trackOwn ship track Track control menuStopping, restarting plotting of own ship track Changing track colorOwn ship’s track Track plotting method and interval for own ship track Own ship track color windowTrack plotting method Interval windowChanging own ship track/mark distribution setting Track plotting intervalInterval windows Track memory windowErasing track Erasing own ship track by areaErase menu Erasing own ship track by colorMarks, Lines Entering a mark, lineErase track by color window Erasing all own ship trackChanging mark attributes Selecting line typeMarks & lines menu Marks shape windowErasing marks, lines Lines style windowErasing an individual mark Erasing an individual lineWaypoints Entering waypointsErasing all marks, lines Entering a waypoint at own ship positionWaypoint window Waypoint mark shape selection windowWaypoint mark color selection window P T Entering a waypoint by range and bearingEditing waypoint data Entering a waypoint from the waypoint listAlphanumeric and local waypoint lists Editing waypoint data from the waypoint listErasing waypoints Editing a waypoint from the plotter displayPlotter display Erasing a waypoint directly from the plotter displayChart details menu Changing waypoint mark size Navionics GoldErasing a waypoint from the menu Erasing a waypoint from the waypoint listSearching waypoints Alphanumeric listRoutes Creating routesEntering a route with existing waypoints Route menuNew route entry screen Entering a route with the cursorCreating voyage-based routes Save route menu Save route windowDisplays for entry of time, distance interval Connecting routes Connect route windowInserting waypoints Inserting a waypoint from the route listEdit route menu Waypoint list for editing a Route local listRemoving waypoints from a route Inserting a waypoint from the plotter displayRemoving a waypoint from the route list Removing a waypoint from the plotter displayNavigation Erasing routesNavigating to a quick point Selecting quick point entry methodNavigating to waypoints Navigating to a single quick pointNavigating to multiple quick points Selecting a waypoint from the plotter displayNavigating to ports, port services NavChartTM only Selecting an external waypointQP window Port services and sample port list Select ServiceFollowing a route Selecting the route to followPlotter display, route selected as destination Navigating waypoints in reverse orderExample of when to restart navigation Restarting navigationLog display Setting speed for ETA calculation Switching waypointsAutomatic waypoint switching methods Select speed for ETA windowCanceling route navigation Through the menuOn the plotter display Alarms Audio alarm on/offPlotter alarm menu Audio alarm windowArrival alarm How the arrival alarm worksArrival alarm window Anchor watch alarm How the anchor watch alarm worksAnchor watch alarm window XTE Cross-Track Error alarm Speed alarmHow the XTE alarm works XTE alarm windowProximity alarm Trip alarmProximity alarm window Trip alarm windowGrounding alarm C-MAP specification Grounding alarm windowAlarm information Plotter alarm menu,Alarm messages Plotter alarm messages and their meaningsMessage Meaning Resetting Trip Distance General setup menu,This page intentionally left blank Display mode window Sounder DisplaysSelecting a sounder display Description of sounder displays Single-frequency displayIndications on the single frequency display Dual-frequency displaySounding area and transmission frequency Marker-zoom displayMarker-zoom display plus normal sounder display Bottom-zoom display Bottom-zoom display plus normal sounder displayBottom-lock display Bottom-lock display plus normal sounder displayBottom discrimination display Bottom discrimination displayScope display display only Scope displayAutomatic Sounder Operation Selecting screen split method in combination displaysHow the automatic sounder works Types of automatic sounder modesHow to enable automatic sounder operation Selecting the manual modeManual Sounder Operation Selecting display rangeAdjusting the gain Shifting the rangeExamples of proper and improper gain Gain windowHow to measure depth and time Measuring Depth, TimeReducing Interference Types of interferenceReducing Low Level Noise Noise limiter windowAppearance of clutter Clutter windowSignal level window Erasing Weak EchoesAppearance of weak echoes Color bar 16 color when white marker function is active White MarkerPicture Advance Speed Advancement independent of ship’s speedAdvancement synchronized with ship’s speed Picture advance windowDisplay Colors Hue no. and background and echo colorsHue No Echo Color Background Color Sounder alarm menu Alarm audio windowBottom alarm Fish alarmBottom alarm window Fish alarm windowFish alarm B/L Water temperature alarmFish alarm B/L window Water temperature alarm windowWhen an alarm setting is violated Sounder alarm messages and their meaningsDepth Alarm Fish AlarmWater Temperature Graph Changing Pulse Repetition RateSaving Sounder Picture to an SD Card Interpreting the Sounder Display Zero lineBottom echo Zero lineFish school echoes Surface noise/AerationFish school echoes Surface noise/aerationThis page intentionally left blank Turning AIS Feature On/Off AIS Option menuAIS Display Mode window Vector modeAIS Operation AIS Symbols Setting Number of AIS Targets to DisplayAIS symbols Symbol DescriptionActivating Targets Displaying Target DataAIS target data display Setting CPA and Tcpa Lost TargetLost target Confirming a lost targetProximity Alarm CPA windowTcpa window Showing, Hiding AIS Target Tracks Choosing Vector TimeAIS vector time window Displaying Past Positions of AIS Targets AIS past position displaysDeleting all data other than chart data from memory cards Memory Card OperationsSave data menu Data TransferSaving data to a memory card Memory card messagesMemory card messages Message Reason RemedyPlaying back data from a memory card Load data menuSetting communication software on the PC Uploading, Downloading DataUploading or downloading data Upload and download menusBaud rate window Waypoint data formatWaypoint data format Characters available for commentRoute data menu Route comment data formatEnd of sentence Loading Waypoint Data from Yeoman Mark data formatMark data format Receiving Data Via Network Equipment Receive data menuHost name window Marks & lines windowOutputting Data Through the Network Select sentence menuThis page intentionally left blank General Setup General setup menuContents of general setup menu Contents of general setup menu con’t from previous Radar Setup Radar display setupRadar display setup menu AIS OptionContents of radar display setup menu Con’t on nextContents of radar display setup menu con’t from previous Radar range setup Radar range setup menuModel Maximum Range Function key setup Function Key Default FunctionRadar function key menu Radar function key optionsRadar function keys Menu Item Function Function Key LabelPlotter Setup Plotter setup menu Contents of plotter setup menuNavigation options Plotter function key menu TRK EML RUL ADD ALPPlotter function keys Chart Setup Chart offsetPlotter display, chart offset selected Navionics Gold chart attributes MAP chart attributes Displaying the Chart Configuration menuChart configuration menu C-MAP Contour Line Soft keyChart Configuration menu description Chart Configuration menu descriptionObject Content Settings Description Chart Configuration menu description con’t from previous Object Content Setting DescriptionNormal or U.ZOOM or O.ZOOM Depth Config soft key Depth Config menuDepth Config menu description Data Boxes Setup Setting Setting Range Default SettingData box menu Show fromData Boxes Setup Hot Page Setup Hot page setup menuNavigator Setup Hot page setup menu, Split X 3 screen, sub screen selectionNavigation data source Contents of nav setup menu GPS receiver setup Set equipped with GP-310B/320B GPS setup menu Contents of GPS setup menuContents of GPS setup menu con’t on previous GPS Status TD display setup Contents of Waas Setup menuTD setup menu Displaying Loran C TDs Loran GRI & station pair windowLoran C GRI & station pair window Displaying Decca TDsNav Data Display Setup Nav data setup screenSounder Setup System setupNav data setup window Sounder system setup menuSounder system setup menu description TVGHF,LF SM1-SM4, OFFSounder system setup menu description con’t from previous Sensor setup Sensor setup menuSensor setup menu settings Setting range for default Default SettingSounder range setup menu Default basic rangesSounding range, zoom range, bottom lock range Zoom range and bottom-lock rangesSounder function key menu Sounder function key optionsTLL CLT SLV Sounder function keys Nav Graphic Display Setup NAV Graphic menuGraphic meter window Depth graph up-date windowPreventive Maintenance Maintenance programCheck point Remedy LCDReplacement of Batteries Replacement of FuseBattery on circuit board Batteries in remote controllerTrackball Maintenance Replacing the MagnetronReplacing the Synchro Belt 1824C only Radar model and magnetron usedSimple Troubleshooting General troubleshootingRadar troubleshooting GeneralPlotter troubleshooting PlotterSounder troubleshooting SounderDiagnostics Memory I/O testMemory I/O Test menu Display unit test Display unit test resultsGPS sensor test Requires GPS Receiver GP-310B/320B GPS receiver test resultsNetwork sounder test results ARP test resultsTest pattern Test pattern sequenceKeyboard, remote controller test Screen for testing keyboard, remote controllerGPS Status Display GPS status displayClearing Memories Memory clear menuWindows for clearing memory Error Messages Error messagesError Message Meaning Remedy General Heading Data MissingMenu Overview AP-1AP-2 AppendixSetup AP-3NAV Graphic Display Setup AP-4AP-5 PlotterDepth Config soft key AP-6AP-7 AP-8 Zoom Marker ON, OFF HUE 1-9Alarm key Radar AlarmsPlotter Alarms Sounder AlarmsGeodetic Chart List AP-10Icons AP-11Icon Meaning AP-12 Specifications of Marine Radar Model 18x4C/19x4C SeriesTransceiver Module Display Unit Plotter Function Environmental Condition Specifications of Video Plotter GD-1920C Index IN-1IN-2 IndexIN-3 MessagesTD setup IN-4Page Page
Related manuals
Manual 91 pages 5.55 Kb