Furuno 1824C manual Changing waypoint mark size Navionics Gold, Erasing a waypoint from the menu

3. PLOTTER OPERATION

Erasing a waypoint from the menu

1.Press the MENU key followed by the WAYPOINTS/ROUTES and WAYPOINTS soft key to open the waypoint menu.

2.Press the WAYPOINT BY CURSOR soft key.

3.Operate the Trackball to place the cursor on the waypoint which you want to erase. A flashing diamond mark appears on the waypoint when it is correctly selected.

4.Press the EDIT/MOVE soft key followed by the ERASE WPT soft key. You are asked if you are sure to erase the waypoint.

5.Push the ENTER knob to erase the waypoint.

6.Press the MENU key to close the menu. The waypoint is erased from the plotter screen and the waypoint list.

Erasing a waypoint from the waypoint list

1.Press the MENU key to open the menu.

2.Press the WAYPOINTS/ROUTES and WAYPOINTS soft keys.

3.Press the LOCAL LIST or ALPHANUMERIC LIST soft key.

4.Use the Trackball to select the waypoint you want to erase.

5.Press the ERASE WPT soft key. You are asked if you are sure to erase the waypoint.

6.Push the ENTER knob. The waypoint is erased from both the waypoint list and the plotter screen (if it is currently displayed).

7.Press the MENU key to close the menu.

3.8.4Changing waypoint mark size (Navionics GOLD)

You may change the size of all waypoint marks to small or large (default), or you may turn them off.

1.Press the MENU key to open the menu.

2.Press the CHART SETUP and CHART CONFIGURATION soft keys.

LAT/LON GRID	GREEN
TEXT INFORMATION	ON
WAYPOINTS	LARGE
WAYPOINT NAMES	ON
CHART BORDER LINES	ON
LANDMASS	BRT YELLOW
BACKGROUND	BLACK
NAVAIDS	ON
LIGHT SECTOR INFO	ON
OTHER SYMBOLS	WHITE
MARK SIZE	LARGE

CHART

CONFIG

EDIT

CNTOUR

LINE

RETURN

Chart details menu

3.Use the Trackball to select WAYPOINTS.

4.Press the EDIT soft key.

3-31