Schumacher PID-410 Using the USB Port, Using the Inverter to Operate a TV or Audio Device

Page 11

5.Turn the device on. The display will now show the total wattage used by the device. To change the digital display, press the ON/OFF switch.

6.To disconnect, reverse the above procedure.

NOTE: If more than one device is to be powered, start one device at a time to avoid a power surge and overloading the inverter. The surge load of each device should not exceed the inverters Continuous Operation wattage rate.

If there is a short circuit or power surge in the device,  will display and the alarm will sound. Press the ON/OFF switch to turn off the alarm. If the  displays after several attempts, there is a short circuit or the device requires more “starting” or “peak” load than the inverter is capable of providing.

If you are using the power inverter to operate a battery charger, monitor the temperature of the battery charger for about 10 minutes. If the battery charger becomes abnormally warm, disconnect it from the inverter immediately.

NOTE: You can use an extension cord from the inverter to the device without significantly decreasing the power being generated by the inverter. For best operating results, the extension cord should be no longer than 50 feet.

Using the USB Port

The USB port provides up to 500mA at 5V DC.

1.Plug the device into the USB port.

2.Press and hold the ON/OFF switch to turn the inverter on. (The internal speaker will make a brief “beep”. This is normal.).

3.Turn the USB device on.

4.Reverse these steps when finished using the USB port.

Using the Inverter to Operate a TV or Audio Device:

The inverter is shielded and filtered to minimize signal interference. Despite this, some interference may occur with your television picture, especially with weak signals. Below are some suggestions to try and improve reception.

1.Make sure the television antenna produces a clear signal under normal operating conditions (i.e. at home plugged into a standard 120-volt AC wall outlet). Also, ensure that the antenna cable is adequately shielded and of good quality.

2.Try altering the position of the inverter, antenna cables, and television power cord. Add an extension cord from the inverter to the TV so as to isolate its power cord and antenna cables from the 12-volt power source.

• 11 •

Image 11
Contents Advertencia Page Table of Contents Sección Pàgina ÍndicePartie Table DES MatièresPage Risk of electric shock or fire Important Safety InstructionsBefore Using Your Power Inverter Inverter FeaturesPage Inverter connection Connecting Inverter CablesConnecting inverter cable to a vehicle 100 watts maximum Operating InstructionsUsing the Inverter to Operate a TV or Audio Device Using the USB PortLED Display Power SourceIf the Inverter Fuse Blows Troubleshooting Model PID-410 / PIF-410 SpecificationsModel PID-760 / PIF-760 Replacement PartsLimited Warranty Page Advertencia El riesgo de descarga eléctrica o incendio Instrucciones Importantes DE SeguridadCaracterísticas DEL Inversor Page Conexión del Inversor Para Conectar LOS Cables DEL InversorEl uso de Puerto USB Instrucciones DE OperaciónFuente DE Energía SI SE Quema EL Fusible DEL Inversor Muestra DE Luces LEDProblema Causa Posible Solucion Resolución DE ProblemasProblema Causa Posible Solucion Modelo PID-760 / PIF-760 EspecificacionesPiezas DE Repuesto Modelo PID-410 / PIF-410Garantía Limitada Page Page Risque de choc électrique ou d’incendie Avant D’UTILISER Votre Onduleur Caractéristiques DE L’ONDULEURPage Connexion de l’onduleur Connexion DES Càbles DE L’ONDULEURUtilisation du port USB Instructions D’UTILISATIONSource D’ALIMENTATION SI LE Fusible DE L’ONDULEUR Saute Affichage À DELDépannage Problème Raison SolutionProblème Raison Solution Modèle PID-760 / PIF-760 10. SpécificationsPiêces DE Rechange Modèle PID-410 / PIF-410Garantie Limitée

PID-410 specifications

The Schumacher PID-410 is a versatile and powerful battery charger and maintainer designed to meet the needs of various consumers, from automotive enthusiasts to casual users. This model stands out in the market for its advanced features and user-friendly design.

One of the main features of the PID-410 is its microprocessor-controlled system, which ensures precise charging and prevents overcharging, thereby prolonging battery life. This intelligent control technology continuously monitors the battery's status and adjusts the charging process accordingly, ensuring optimal performance. The unit is suitable for a wide range of battery types, including standard lead-acid, AGM (Absorbent Glass Mat), and gel batteries.

The PID-410 has a multi-stage charging process, which includes bulk, absorption, and float phases. This allows for rapid initial charging while gradually transitioning to a maintenance mode that keeps the battery topped off without causing damage. The ability to recover deeply discharged batteries also sets the PID-410 apart from many conventional chargers, making it an ideal choice for users with older or neglected batteries.

Safety is a paramount concern with the Schumacher PID-410, and it includes several built-in safety features. Reverse polarity protection ensures the charger does not work if the clamps are connected incorrectly, preventing shorts and potential hazards. Additionally, the unit is equipped with short circuit protection and over-temperature protection, making it a reliable option for both novice and experienced users.

Portability is another significant advantage of the PID-410. Its compact design and lightweight construction make it easy to transport and store, allowing users to take it wherever needed. The easy-to-read LED indicators simplify monitoring the charging status, while its built-in handle enhances convenience.

The Schumacher PID-410 is not just a charger; it also serves as a battery maintainer. This feature means that you can connect it to your battery for extended periods without fear of overcharging. It is perfect for seasonal vehicles, like motorcycles, RVs, or classic cars, ensuring that they remain in good condition during off-seasons.

In conclusion, the Schumacher PID-410 embodies innovative technology, safety features, and user-centric design. Whether you are looking to charge a battery quickly or maintain its health over time, the PID-410 proves to be a reliable choice for all your battery maintenance needs.