Schumacher PID-410 owner manual

Page 9

To calculate the continuous load: Continuous Load = AMPS x 120 (AC Voltage).

Always run a test to establish whether the inverter will operate a particular piece of equipment or device. In the event of a power overload, the inverter is designed to automatically shut down. This safety feature prevents damaging the inverter while testing devices and equipment within the wattage range of the inverter.

If a device does not operate properly when first connected to the inverter, turn the inverter ON (I), OFF (O), and ON (I) again in quick succession. If this procedure is not successful, it is likely that the inverter does not have the required capacity to operate the device in question.

This inverter is designed to power 100 watt devices or less when used with the vehicle 12 volt accessory port. To use the full output you must use the battery clips adapter and connect the inverter directly to the battery.

NOTE: The 100 watt limit is to accommodate the fuse ratings for all vehicles. Some vehicles may allow the full output. If the fuse blows when you switch on the device you are trying to use, you have to either use a smaller device or you must purchase the 12 volt accessory outlet to battery clips adapter (Schumacher Model SAC-103) and connect the inverter directly to the battery.

This inverter uses a nonsinusoidal waveform. Therefore we do not recommend you use it to power the following devices:

1.Switch Mode Power Supplies;

2.Linear Power Supplies;

3.Class 2 Transformers;

4.Line Filter Capacitors;

5.Shaded Pole Motors;

6.Fan Motors;

7.Microwave Ovens;

8.Fluorescent and High Intensity Lamps (with a Ballast); and

9.Transformerless Battery Chargers.

Doing so, may cause the device to run warmer or overheat.

• 9 •

Page 8 Page 10
Image 9
Page 8 Page 10
Contents Advertencia Page Table of Contents Sección Pàgina ÍndicePartie Table DES MatièresPage Risk of electric shock or fire Important Safety InstructionsBefore Using Your Power Inverter Inverter FeaturesPage Connecting inverter cable to a vehicle 100 watts maximum Connecting Inverter CablesOperating Instructions Inverter connectionUsing the Inverter to Operate a TV or Audio Device Using the USB PortLED Display Power SourceIf the Inverter Fuse Blows Troubleshooting Model PID-410 / PIF-410 SpecificationsReplacement Parts Limited WarrantyModel PID-760 / PIF-760 Page Advertencia El riesgo de descarga eléctrica o incendio Instrucciones Importantes DE SeguridadCaracterísticas DEL Inversor Page Conexión del Inversor Para Conectar LOS Cables DEL InversorEl uso de Puerto USB Instrucciones DE OperaciónFuente DE Energía SI SE Quema EL Fusible DEL Inversor Muestra DE Luces LEDProblema Causa Posible Solucion Resolución DE ProblemasProblema Causa Posible Solucion Piezas DE Repuesto EspecificacionesModelo PID-410 / PIF-410 Modelo PID-760 / PIF-760Garantía Limitada Page Page Risque de choc électrique ou d’incendie Avant D’UTILISER Votre Onduleur Caractéristiques DE L’ONDULEURPage Connexion de l’onduleur Connexion DES Càbles DE L’ONDULEURUtilisation du port USB Instructions D’UTILISATIONSource D’ALIMENTATION SI LE Fusible DE L’ONDULEUR Saute Affichage À DELDépannage Problème Raison SolutionProblème Raison Solution Piêces DE Rechange 10. SpécificationsModèle PID-410 / PIF-410 Modèle PID-760 / PIF-760Garantie Limitée

PID-410 specifications

The Schumacher PID-410 is a versatile and powerful battery charger and maintainer designed to meet the needs of various consumers, from automotive enthusiasts to casual users. This model stands out in the market for its advanced features and user-friendly design.

One of the main features of the PID-410 is its microprocessor-controlled system, which ensures precise charging and prevents overcharging, thereby prolonging battery life. This intelligent control technology continuously monitors the battery's status and adjusts the charging process accordingly, ensuring optimal performance. The unit is suitable for a wide range of battery types, including standard lead-acid, AGM (Absorbent Glass Mat), and gel batteries.

The PID-410 has a multi-stage charging process, which includes bulk, absorption, and float phases. This allows for rapid initial charging while gradually transitioning to a maintenance mode that keeps the battery topped off without causing damage. The ability to recover deeply discharged batteries also sets the PID-410 apart from many conventional chargers, making it an ideal choice for users with older or neglected batteries.

Safety is a paramount concern with the Schumacher PID-410, and it includes several built-in safety features. Reverse polarity protection ensures the charger does not work if the clamps are connected incorrectly, preventing shorts and potential hazards. Additionally, the unit is equipped with short circuit protection and over-temperature protection, making it a reliable option for both novice and experienced users.

Portability is another significant advantage of the PID-410. Its compact design and lightweight construction make it easy to transport and store, allowing users to take it wherever needed. The easy-to-read LED indicators simplify monitoring the charging status, while its built-in handle enhances convenience.

The Schumacher PID-410 is not just a charger; it also serves as a battery maintainer. This feature means that you can connect it to your battery for extended periods without fear of overcharging. It is perfect for seasonal vehicles, like motorcycles, RVs, or classic cars, ensuring that they remain in good condition during off-seasons.

In conclusion, the Schumacher PID-410 embodies innovative technology, safety features, and user-centric design. Whether you are looking to charge a battery quickly or maintain its health over time, the PID-410 proves to be a reliable choice for all your battery maintenance needs.
Top Page Image Contents