Sterling SSC1-5Q service manual Model # Serial #

Page 3

Write down your unit serial number(s)

Model #

Serial #

here for future reference

________________

________________

 

________________

________________

 

________________

________________

 

________________

________________

Performance figures stated in this manual are based on a standard atmosphere of 59°F

(15°C) at 29.92” Hg (1,014 millibars) at sea level, using 60 Hz power. Altitude is an important consideration when specifying vacuum conveying components. Sterling can advise you on proper selection and sizing of systems for your operating environment.

Sterling is committed to a continuing program of product improvement. Specifications, appearance, and dimensions described in this manual are subject to change without notice.

 

© Copyright Sterling 2003

All rights reserved.

Effective 11/7/2003

Part No. A0

Bulletin No. SM2-615

Page ii of 38

Image 3
Contents SSC1-5Q Parts and Service Department Model # Serial # Table of Contents Configurable Settings Charts and Figures Safety Considerations Sterling SSC1-5Q Conveying Systems Pump 5-Station Controller System Capabilities General InformationEquipment Function Necessary DocumentsEquipment Cycle Models Covered by this ManualSSC1-5Q 5-Station Controller SSC1-5Q Controller Tools and Equipment Needed SafetySafety Considerations Work RulesGeneral Responsibility Reporting a Safety DefectOperator Responsibility Maintenance ResponsibilitySafety Devices Safety Circuit StandardsFail Safe Operation Safety Device Lock-Outs Page Parcel Post Shipment Shipping InformationUnpacking and Inspection Event of Shipping DamagesReturns United Parcel Service ShipmentIf the Shipment is Not Complete If the Shipment is Not CorrectConnecting the Control Panel to Vacuum Receivers InstallationInstalling the SCC1-5Q Control Panel Making SSC1-5Q Control Panel Power Drop Wiring ConnectionsSpecial Timed Convey Connecting the Control Panel to the Pump PackageIntroduction Using the ControllerSetup Basic Menus and Setup of ControllerSetting Blowback Parameters Setting Pump ParametersStarting the System Changing ParametersLong Tones High vaccum alarm will sound in Short TonesOptions for Station Setup 6Configurable SettingsIdle Options for Pump Setup7Maintenance General Troubleshooting TroubleshootingAlarms Station AlarmsPump Alarms CE Package for 220/1/50 Operation Remote Audible/visual alarmOptions 230/1/60 OperationRecommended Spare Parts List Spare Parts ListContact Information for Technical Assistance Technical AssistanceWarranty Returns Returned Material PolicyCredit Returns Warranty Safety Tag Information Controller Safety TagsController Identification Serial Number Tag Appendix Page Service Department