Pioneer DEH-P490IB operation manual Storing and recalling broadcast stations

Section

03Available accessories

Introduction of advanced operations

%Press FUNCTION to select BSSM.

#To return to the channel display, press BAND.

Note

If you do not operate the function within about 30 seconds, the display is automatically returned to the channel display.

Storing and recalling broadcast stations

If you press any of the preset tuning buttons 1 to 6, you can easily store up to six broadcast stations for later recall with the touch of a but- ton.

%When you find a station that you want to store in memory, press one of preset tuning buttons 1 to 6 and hold until the preset number stops flashing.

The number you have pressed will flash in the preset number indicator and then remain lit. The selected station has been stored in mem- ory.

The next time you press the same preset tun- ing button the station is recalled from mem- ory.

stored in order from the lowest channel up. When finished, BSSM stops flashing.

#To cancel the storage process, press b.

#To return to the channel display, press BAND.

Notes

!If you do not operate the function within about 30 seconds, the display is automatically re- turned to the channel display.

!Storing broadcast stations with BSSM may re-

place broadcast stations you have saved using 1 to 6.

Notes

!Up to 12 stations, six for each of two TV bands can be stored in memory.

!You can use a and b to recall stations as- signed to preset tuning numbers P.CH01 to 12.

Storing the strongest broadcast stations sequentially

1Press FUNCTION to select BSSM.

2Press a to turn BSSM on.

BSSM begins to flash. While BSSM is flashing the 12 strongest broadcast stations will be

32 En