
Section
02
Operating this unit
3Press a or b to set the date and clock. Pressing a will increase the value of the se- lected segment. Pressing b will decrease the value of the selected segment.
Switching the warning tone
If the front panel is not detached from the head unit within five seconds of turning off the ignition, a warning tone will sound. You can turn off the warning tone.
1Press FUNCTION to select
WARNING TONE.
2Press a or b to turn WARNING TONE on or off.
Switching the auxiliary setting
Auxiliary equipments connected to this unit can be activated individually. Set each AUX source to ON when using. About connecting or using auxiliary equipments, refer to Using the AUX source on the next page.
1Press FUNCTION to select AUX1/AUX2.
2Press a or b to turn AUX1/AUX2 on or
off.
Switching the dimmer setting
To prevent the display from being too bright at night, the display is automatically dimmed when the car’s headlights are turned on. You can turn the dimmer on or off.
1Press FUNCTION to select DIMMER.
2Press a or b to turn DIMMER on or off.
Setting the rear output and subwoofer controller
This unit’s rear output (rear speaker leads out- put and RCA rear output) can be used for full- range speaker (REAR SP FULL) or subwoofer
(REAR SP S/W) connection. If you switch the rear output setting to REAR SP S/W, you can connect a rear speaker lead directly to a sub- woofer without using an auxiliary amp.
1Press FUNCTION to select
S/W CONTROL.
2Press a or b to switch the rear output setting.
Pressing a or b will switch between REAR SP FULL
be displayed.
# When no subwoofer is connected to the rear
output, select REAR SP FULL.
# When a subwoofer is connected to the rear output, set for subwoofer REAR SP S/W.
Notes
!Even if you change this setting, there is no output unless you turn the subwoofer output on (refer to Using subwoofer output on page 19).
!If you change this setting, subwoofer output in the audio menu return to the factory set- tings.
!Both rear speaker leads outputs and RCA rear output are switched simultaneously in this setting.
Switching the feature demo
The feature demo automatically starts when power to this unit is turned off while the igni- tion switch is set to ACC or ON.
1Press FUNCTION to select
DEMONSTRATION.
2Press a or b to turn DEMONSTRATION on or off.
Notes
!Remember that if the feature demo continues operating when the car engine is turned off, it may drain battery power.
22
En