Xantrex Technology RS400 manual Optional Accessory Remote Switch, Dimensions of Remote Switch

Page 16

Optional Accessory: Remote Switch

An optional remote switch can be plugged into the remote switch jack at the back of the RS400. It lets you switch the RS400 from on to standby from a convenient location—up to 25 feet (7.5 m) away from the inverter (using the cable supplied with the switch).

Dimensions of Remote Switch

Height	2.5 inches (63.5 mm)
Width	2 inches (50.8 mm)
Depth	1.1 inches (28.3 mm)
Cable length	25 feet (7.5 m)

Part number of Remote Switch

To purchase a remote switch, please contact Customer Service for a referral to a distributor. Please provide the part number 808-2400. See page ii for contact information.

Instructions for installing and using the remote switch are included in the remote switch package and the RS400 Sine Wave Inverter Installation Guide.

Note: The remote switch jack at the back of the RS400 may not be accessible once the inverter has been mounted.

If you intend to use the remote switch with an RS400 that has already been installed, consult a qualified service technician before installing and connecting the remote switch.

1–6	445-0167-01-01

Image 16

Contents RS400 Sine Wave Inverter Page RS400 Sine Wave Inverter Date and Revision Scope PurposeOrganization Acronyms and Terminology Conventions UsedRelated Information Important Safety Instructions General PrecautionsExplosive Gas Precautions FCC Information to the UserContents Specifications Introduction Premium Power and Ease of Use How RS400 WorksProtection feature This protection feature… Comprehensive ProtectionRS400 Features Front Panel2Back panel of the RS400 2Back Panel Features Back PanelDimensions of Remote Switch Optional Accessory Remote SwitchPart number of Remote Switch Operation Front Panel Features 1Front panel of the RS400 Front panel featuresOperating the RS400 Turning the RS400 to Standby When Not in UseTurning the RS400 to On or to Standby Using the S400 Remote Switch 2S400 Remote SwitchOperating in Invert Mode Recharging Your Batteries When Low Battery Light IlluminatesRecovering from Low Battery Voltage Shutdown Restarting or Operating Multiple AppliancesOperating in Shore Power Mode To operate in shore power modeMonitoring the Indicator Lights 2Status of Indicator LightsResetting After a Fault or Shutdown 3Resetting After a Fault or ShutdownPage Troubleshooting Troubleshooting Reference Front Panel1Troubleshooting Reference Gfci Specifications Electrical Specifications Physical Specifications with ProjectionsFan Cooling System Regulatory ApprovalsTransfer Circuit Page Warranty and Product Information WarrantyProduct DisclaimerExclusions Return Procedure Return Material Authorization PolicyOut of Warranty Service Information About Your System Purchased From Purchase DateIndex IX-2 445-0167-01-01 Page Xantrex Technology Inc