Important Safety Instructions
WARNING
This Owner’s Guide contains important safety and operating instructions.
Before using your RS400 Sine Wave Inverter, be sure to read, understand, and save these safety instructions.
WARNING: Restrictions on use
The RS400 Sine Wave Inverter shall not be used in connection with life support systems or other medical equipment or devices.
WARNING: Shock hazard
The RS400 has On/Standby mode only. It does not have an Off mode, that is, DC power is permanently connected to the unit.
General Precautions
1.Before installing and using the inverter, read all appropriate sections of this guide and any cautionary markings on the inverter and the batteries.
2.Do not operate the inverter if it has received a sharp blow, been dropped, or otherwise damaged. If the unit is damaged, see “Warranty and Product Information” on page
3.Do not dismantle the inverter; it contains no user serviceable parts. Attempting to service the unit yourself could cause electrical shock or fire. Internal capacitors remain charged after all power is disconnected. See “Warranty” on page
v |