Xantrex Technology 450 owner manual Accessories

Page 13

Number Feature

2Cooling Fan When output power is greater than approximately 50 W, the fan turns on to help maintain optimum operating temperature.

3Chassis Ground Screw During installation, the chassis ground screw is connected to a chassis ground wire that connects to the grounding point on your boat or vehicle.

4Negative DC Terminal Connection point to the negative battery terminal.

5Positive DC Terminal Connection point to the positive battery terminal.

Accessories

There are no accessories for this product.

9

Image 13

Contents

XPower Inverter Date and Revision Table of Contents Troubleshooting Introduction XPower 450 featuresElectrical Shock Hazard Important Safety InformationHeated Surface Hazard Explosion and Fire Hazard Make sure the area around the battery is well ventilatedRisk of Damage to Equipment Output is NON-SINUSOIDAL Risk of Damage to the Xpower 450 Inverter Safety features AC panel FeaturesDC panel Accessories Choosing a location InstallationTo mount the inverter Mounting the inverterReverse Polarity Damage Using the DC cable with cigarette lighter plugHardwiring the inverter to the battery Using the DC cable clipsShock and Fire Hazard To hardwire the inverter to a 12 V battery Inverter Damage Grounding locations Connecting the chassis groundChassis ground screw To test the Gfci protection Testing the GFCI-protected AC outletOperating statuses OperationInverter operation Battery operating time Battery Operating Times Using vehicle batteries Maintaining Battery ConditionMinimizing power draw Common problems TroubleshootingBuzz in audio systems Possible cause Remedy Troubleshooting referenceProblem Measured inverter output is too low Problem Battery run time is less than expected Consumer hotline Electrical specifications SpecificationsPhysical specifications Warranty Limited WarrantyReturn Material Authorization Policy Out of Warranty Service Page Toll free in North America 1-408-987-6030 direct REV B