Multiquip MT55F manual General Information, Definition of Tamping Rammer

Page 10

GENERAL INFORMATION

Definition of Tamping Rammer

The Mikasa MT55F tamping rammer is a powerful compacting tool capable of applying a tremendous force in consecutive impacts to a soil surface. Its applications include soil compacting for road, embankments and reservoirs as well as backfilling for gas pipelines, water pipelines and cable installation work.

The impact force of the MT55F levels and uniformly compacts voids between soil particles to increase dry density.

Circular motion is converted to create impact force. The MT55F tamping rammer develops a powerful compacting force at the foot of the rammer. To maintain optimum performance, proper operation and service are essential.

Construction of Tamping Rammer

The Mikasa MT55F is equipped with an air cooled, two cycle gasoline engine. Transmission of the power takes place by increasing the engine speed to engage the centrifugal clutch.

Rammer Gearbox and Spring Cylinder

The Mikasa MT55F uses an oil bath lubrication system. Always check the oil level through the oil level sight glass at the rear of the tamper foot.

Controls

Before starting the MT55F Tamping Rammer identify and understand the function of the controls, see Figure 1 on page 13.

 

CAUTION

Handle Operation

 

 

 

Before starting operation check the lifting handle to:

1.Make sure that there is no damage on the bolts.

2.Make sure that there is no crack or breakage on handle.

3.Make sure that there is no fissure on the surface. If there is any abnormality or damage, replace with new one.

For operation:

This handle is to be used to lift up the shoe part of the machine with the body laid down on the ground or truck bed.

1.Use proper lifting techniques to avoid back injury. This handle is for manual lifting only.

2.Do not use this handle as a rammer lift point. Use the lifting point on the top of the machine.

3.Do not move the rammer with the lifting handle and the front rollers more than (16 feet) 5 meters.

PAGE 10 — MT55F RAMMER — OPERATION AND PARTS MANUAL — REV. #5 (01/06/12)

Image 10
Contents Model MT55F Proposition 65 Warning MT55F Rammer Operation and Parts Manual REV. #5 01/06/12 Table of Contents MT55F Tamping RammerParts Ordering Procedures Ordering parts has never been easierSafety Information Safety MessagesGeneral Safety Engine Safety Transporting Safety General Information Definition of Tamping RammerSpecifications MT-55F Rammer SpecificationsComponents MT55F RammerBasic Engine Initial ServicingOperation Rammer Gearbox and Spring Cylinder Oil BathMotor Oil Grade 16 MT55F Rammer Operation and Parts Manual REV. #5 01/06/12 Normal Shutdown Maintenance DailyMT55F Rammer Operation and Parts Manual REV. #5 01/06/12 Troubleshooting Engine TroubleshootingRammer Troubleshooting Sample Parts List Explanation of Codes in the Remarks ColumnSuggested Spare Parts MT55F Rammer 3TO 5 Units with RobinTo start, switch must be in the on position Nameplate and DecalsPart Name QTY Remarks Crankcase and Engine Assy Part Name QTY Remarks 28 MT55F Rammer Operation and Parts Manual REV. #5 01/06/12 Stiffener Guide Cylinder Assy Part Name QTY Foot ASSY. Option Part Name QTY Remarks Tank and Handle Assy Throttle Body 36 MT55F Rammer Operation and Parts Manual REV. #5 01/06/12 Fuel Cock ASSY. N18L-02 Robin EH-090D Engine Crankcase Assy Valve Guide Robin EH-090D Engine Crankshaft and Piston Assy Spacer T=0.8 Robin EH-090D Engine Intake and Exhaust Assy PIN Spring Robin EH-090D Engine Governor Assy Governor Lever Robin EH-090D Engine Recoil Starter Assy Blower Housing CP Robin EH-090D Engine Carburetor Assy Throttle Valve Robin EH-090D Engine Electric Device Assy Flywheel CP Robin EH-092D Engine Crankcase Assy Ball BEARING, 60074C3 Robin EH-092D Engine Crankshaft and Piston Assy Crankshaft CP Robin EH-092D Engine Intake and Exhaust Assy Gasket Exhaust Robin EH-092D Engine Carburetor Assy Lever SUB ASSY. Throttle Robin EH-092D Engine AIR Cleaner Assy Part Name Robin EH-092D Engine GOVERNOR, Operation Assy Linkage Bushing Robin EH-092D Engine Blower Housing Assy Label Robin EH-092D Engine Recoil Starter Assy Slide PLATE, B Robin EH-092D Engine Accessories Assy Accessory Tool KIT Terms and Conditions of Sale Parts Freight PolicyMT55F Rammer Operation and Parts Manual REV. #5 01/06/12 HERE’S HOW to GET Help