Multiquip MT55F manual Transporting Safety

Page 9

SAFETY INFORMATION

TRANSPORTING SAFETY

CAUTION

„NEVER allow any person or animal to stand underneath the equipment while lifting.

NOTICE

„Before lifting, make sure that the equipment parts (hook and vibration insulator) are not damaged and screws are not loose or missing.

„Always make sure crane or lifting device has been properly secured to the lifting bail (hook) of the equipment.

„ALWAYS shutdown engine before transporting.

„NEVER lift the equipment while the engine is running.

„Tighten fuel tank cap securely and close fuel cock to prevent fuel from spilling.

„Use adequate lifting cable (wire or rope) of sufficient strength.

„Use one point suspension hook and lift straight upwards.

„DO NOT lift machine to unnecessary heights.

„ALWAYS tie down equipment during transport by securing the equipment with rope.

„Never allow any person or animal to stand underneath the equipment while lifting.

ENVIRONMENTAL SAFETY

NOTICE

„Dispose of hazardous waste properly. Examples of potentially hazardous waste are used motor oil, fuel and fuel filters.

„DO NOT use food or plastic containers to dispose of hazardous waste.

„DO NOT pour waste, oil or fuel directly onto the ground, down a drain or into any water source.

MT55F RAMMER — OPERATION AND PARTS MANUAL — REV. #5 (01/06/12) — PAGE 9

Page 8 Page 10
Image 9
Page 8 Page 10
Contents Model MT55F Proposition 65 Warning MT55F Rammer Operation and Parts Manual REV. #5 01/06/12 MT55F Tamping Rammer Table of ContentsOrdering parts has never been easier Parts Ordering Procedures Safety Messages Safety InformationGeneral Safety Engine Safety Transporting Safety Definition of Tamping Rammer General InformationMT-55F Rammer Specifications SpecificationsMT55F Rammer ComponentsInitial Servicing Basic EngineRammer Gearbox and Spring Cylinder Oil Bath OperationMotor Oil Grade 16 MT55F Rammer Operation and Parts Manual REV. #5 01/06/12 Normal Shutdown Daily MaintenanceMT55F Rammer Operation and Parts Manual REV. #5 01/06/12 Engine Troubleshooting TroubleshootingRammer Troubleshooting Explanation of Codes in the Remarks Column Sample Parts ListMT55F Rammer 3TO 5 Units with Robin Suggested Spare PartsNameplate and Decals To start, switch must be in the on positionPart Name QTY Remarks Crankcase and Engine Assy Part Name QTY Remarks 28 MT55F Rammer Operation and Parts Manual REV. #5 01/06/12 Stiffener Guide Cylinder Assy Part Name QTY Foot ASSY. Option Part Name QTY Remarks Tank and Handle Assy Throttle Body 36 MT55F Rammer Operation and Parts Manual REV. #5 01/06/12 Fuel Cock ASSY. N18L-02 Robin EH-090D Engine Crankcase Assy Valve Guide Robin EH-090D Engine Crankshaft and Piston Assy Spacer T=0.8 Robin EH-090D Engine Intake and Exhaust Assy PIN Spring Robin EH-090D Engine Governor Assy Governor Lever Robin EH-090D Engine Recoil Starter Assy Blower Housing CP Robin EH-090D Engine Carburetor Assy Throttle Valve Robin EH-090D Engine Electric Device Assy Flywheel CP Robin EH-092D Engine Crankcase Assy Ball BEARING, 60074C3 Robin EH-092D Engine Crankshaft and Piston Assy Crankshaft CP Robin EH-092D Engine Intake and Exhaust Assy Gasket Exhaust Robin EH-092D Engine Carburetor Assy Lever SUB ASSY. Throttle Robin EH-092D Engine AIR Cleaner Assy Part Name Robin EH-092D Engine GOVERNOR, Operation Assy Linkage Bushing Robin EH-092D Engine Blower Housing Assy Label Robin EH-092D Engine Recoil Starter Assy Slide PLATE, B Robin EH-092D Engine Accessories Assy Accessory Tool KIT Freight Policy Terms and Conditions of Sale PartsMT55F Rammer Operation and Parts Manual REV. #5 01/06/12 HERE’S HOW to GET Help
Top Page Image Contents