Ref : MA_WILDCAT_FR
Issued by : Alban ROSSOLLIN
Date : mars 2010
Page 25/49
ASSEMBLY MANUAL : HOBIE WILD CAT
Preparing the mast
Attach the left cable to the fitting situated on the
Slip the spreader into the corresponding slot of the left spreader, taking care that the black plastic disk is above the spreader.
Repeat the same for the right cable, being careful to screw the two parts of cable together.
Adjust the tension with the help of the adjusting screw on the right spreader cable to straighten the mast.
Once that the mast is completely straight, put tension on the two cables under the mast foot with a spanner.
…/…
Copyright HCE 2010