Ref : MA_WILDCAT_FR
Issued by : Alban ROSSOLLIN
Date : mars 2010
Page 33/49
ASSEMBLY MANUAL : HOBIE WILD CAT
Spinnaker kit assembly
1.Installing the spi pole
Connect the pole to the front crossbar
using the pin and split ring.
Attach the front bridles and make sure the the pulley at the end of the pole is facing upwards towards the sky.
Put on the central tension rope without tightening for the time being. It will need to be tightened after the tension has been put on the shrouds and it has been determined which hole for the forestay.
…/…
Copyright HCE 2010