Ref : MA_WILDCAT_FR
Issued by : Alban ROSSOLLIN
Date : mars 2010
Page 41/49
ASSEMBLY MANUAL : HOBIE WILD CAT
Rigging the boat : Jib
4. Once that the jib is hoisted, replace the yellow halyard by the jib Cunningham rope (B).
5. Pass through the eye, then into the pulley that comes out of the jib zip (in the place of the yellow halyard) back down and tie a knot on the large shackle.
6. Take the end of the cunningham line and pass it through the pulley attached at the fixing point of the left bridle. Attach to the end a small pulley.
7. Take the Cunningham rope A from the rope bag. Attach one end on the martingale under the hull. Pass the other end through the pulley and back to the cleat on the front crossbar.
…/…
Copyright HCE 2010