ResMed s8 user manual Start Treatment, Stopping Treatment, Smartstart

Page 13

START TREATMENT

1Make sure the power is on.

A welcome message is displayed briefly on the LCD screen, then the standby (Ramp) screen appears. The key and LCD backlights also turn on.

2Lie down and arrange the air tubing so that it is free to move if you turn in your sleep.

CAUTION

! • Do not leave long lengths of air tubing around the top of your bed. They could twist around your head or neck while you are sleeping.

• Make sure the area around the flow generator is dry and clean. It should also be clear of bedding, clothes, and other potential blockages.

3Alter the ramp time if required (see “How to Change the Ramp Time” on page 17).

To start treatment, press the Start/Stop key, unless your clinician has set up your device to start delivering therapy automatically. If so, your device will start when you breathe into your mask (see “SmartStart” for details).

4Fit your mask as described in the mask user instructions.

WARNING

! A mask should not be used unless the S8 Elite device is powered and operating properly.

5When ramping begins, the LCD will display the word "RAMPING", with the current

pressure indicated as dashes. Each dash is approximately equivalent to 2 cm H2O. For example, 6 dashes represents approximately 12 cm H2O pressure.

SMARTSTART™

The S8 ELITE has a function called SmartStart™ that your clinician can enable. If SmartStart is enabled, your device will start automatically when you breathe into your mask, and will stop automatically when you take your mask off. This means you do not have to press the Start/Stop key to begin or end treatment.

Note: Do not use SmartStart when using a mask with an anti-asphyxia valve, such as the Mirage Full Face Mask.

STOPPING TREATMENT

To stop treatment at any time, remove your mask and press the Start/Stop key or

if your clinician has enabled SmartStart, simply remove your mask and treatment will end.

12

Page 12 Page 14
Image 13
Page 12 Page 14
Contents S8 Elite System S8 Elite Blank Module / Module Vierge / Módulo EN Blanco Contents S8 Elite no Accessories ALL Devices Where Applicable Limited Warranty IndexMedical Information IntroductionYour Responsibility About the S8 ElitePage Adverse Effects Masks S8 Elite SystemHumidifier AccessoriesResscan Data Card Module Page SET UP the S8 Elite HOW to USE the S8 EliteAssemble the Mask Stopping Treatment Start TreatmentSmartstart Excelnt Using the MASK-FITTING FeatureDefinitions of Mask-Fit Star Rating HOW to Attach a Humidifier Keypad Keys HOW to USE the KeypadHOW to Change the Settings HOW to Change the Expiratory Pressure Relief Setting HOW to USE the Standard MenuHOW to Select the Mask Type Other Viewable Information Settings for mask types MaskUsed HRS HOW to USE the Detailed MenuHOW to Change the Tube Length Settings MenuHOW to ADD a Humidifier or Front CAP Options Menu Results MenuServicing Menu Messages on the S8 Elite LCDReplace Page Using a Resscan Data Card Module Using a Blank ModuleS8 Modules Insert the Data Card Using the Data Card to Update SettingsCopy Data Onto the Data Card Remove the Data CardEnglish Page Daily Cleaning Cleaning and MaintenanceWeekly Cleaning Periodic CleaningServicing Replacing the AIR FilterFrequently Asked Questions Can I USE MY S8 Elite if Mains AC Power is not AVAILABLE? Problem Possible Cause Solution TroubleshootingCheck tube High Leak Settings Error Remove Card S8 Elite no Accessories System SpecificationsData Card Symbols Which Appear on the Device ALL Devices Where ApplicableData Card Module RF emissions CISPR11 Group Page Recommended separation distance Separation distance according to frequency of transmitter Product Warranty Period Limited WarrantyPage Index PCB
Related manuals
Manual 39 pages 19.68 Kb Manual 158 pages 44.94 Kb Manual 50 pages 57.93 Kb Manual 88 pages 45.08 Kb Manual 20 pages 25.84 Kb

s8 specifications

The ResMed S8 Escape is a highly regarded CPAP (Continuous Positive Airway Pressure) device designed for the treatment of obstructive sleep apnea. Known for its reliability and user-friendly features, the S8 Escape is part of ResMed’s S8 series, which combines advanced technologies with an emphasis on patient comfort.

One of the standout features of the S8 Escape is its AutoRamp technology, which helps patients gradually transition into their prescribed pressure settings. Instead of starting at the full pressure immediately, AutoRamp begins at a lower pressure, allowing users to fall asleep comfortably before automatically increasing to the prescribed level. This feature significantly improves the overall user experience as it reduces anxiety associated with the use of CPAP devices.

The S8 Escape also boasts a built-in air filter that enhances air quality and protects the device from dust and other particulates. Additionally, the device is designed for whisper-quiet operation, ensuring that users can sleep soundly without the disruption of noise, which can be a common issue with less advanced models. This creates a more peaceful sleeping environment, both for the user and their bed partner.

Another important characteristic of the S8 Escape is its compact design and lightweight build. It is easily portable, making it an ideal choice for both home use and travel. The device also features a user-friendly interface, with a simple LCD screen that displays essential information such as pressure settings and therapy time. This allows users to track their usage and monitor their therapy progress conveniently.

The S8 Escape offers various pressure settings and is compatible with a wide range of masks, ensuring that users can find the right fit for their individual needs. The device’s advanced monitoring capabilities also help in providing feedback on therapy effectiveness, allowing healthcare professionals to adjust settings if necessary.

In summary, the ResMed S8 Escape is a highly functional and patient-friendly CPAP device, featuring advanced technologies designed to enhance the user experience. Its AutoRamp technology, quiet operation, and compact design make it a popular choice among individuals dealing with obstructive sleep apnea.
Top Page Image Contents