ResMed s8 user manual HOW to Change the Settings

Page 18

HOW TO CHANGE THE SETTINGS

You can change settings on the S8 ELITE by using the keypad and LCD. When the

S8 ELITE is in standby mode you can display a series of screens (a menu) on the LCD screen in order to view and change the settings for a particular function.

Your clinician will preset the menu to either a standard view or a detailed view.

See “How to Use the Standard Menu” on page 18 and “How to Use the Detailed Menu” on page 20 for more information.

HOW TO ENTER THE MENU SCREENS

When the S8 ELITE standby (RAMP) screen is displayed you will see the word “menu” in the left-hand corner. To select an S8 ELITE menu, press the Left key.

HOW TO SCROLL THROUGH THE MENU

When you are in the menu, scroll through items by pressing the Up or Down keys.

HOW TO CHANGE A SETTING OPTION

When you have scrolled to the item you require:

1.Press the Left key (Change).

2.Press the Up or Down keys until you see the setting option that you require.

3.Press the Left key (Apply) to select the setting option.

If you wish to exit without changing the option, press the Right key (Cancel).

HOW TO EXIT OUT OF A MENU

Press the Right key (Exit). This will take you back to the standby (RAMP) screen.

HOW TO EXIT OUT OF AN ITEM WITHIN THE MENU

Press the Right key (Exit).

HOW TO CHANGE THE RAMP TIME

During ramp time, the pressure increases from a low pressure to the prescribed treatment pressure. You can set the ramp time in 5-minute intervals, from 0 minutes (OFF) up to a maximum ramp time set by your clinician.

The standby screen displays the current ramp time in the right-hand corner. To change the ramp time, press the Up or Down key until the desired ramp time appears.

Once a ramp time is selected, begin therapy by pressing the Start/Stop key.

ENGLISH

HOW TO USE THE KEYPAD 17

Image 18
Contents S8 Elite System S8 Elite Blank Module / Module Vierge / Módulo EN Blanco Contents Limited Warranty Index S8 Elite no Accessories ALL Devices Where ApplicableYour Responsibility IntroductionMedical Information About the S8 ElitePage Adverse Effects S8 Elite System MasksAccessories HumidifierResscan Data Card Module Page HOW to USE the S8 Elite SET UP the S8 EliteAssemble the Mask Start Treatment Stopping TreatmentSmartstart Using the MASK-FITTING Feature ExcelntDefinitions of Mask-Fit Star Rating HOW to Attach a Humidifier HOW to USE the Keypad Keypad KeysHOW to Change the Settings HOW to USE the Standard Menu HOW to Change the Expiratory Pressure Relief SettingHOW to Select the Mask Type Settings for mask types Mask Other Viewable InformationHOW to USE the Detailed Menu Used HRSSettings Menu HOW to Change the Tube LengthHOW to ADD a Humidifier or Front CAP Servicing Menu Results MenuOptions Menu Messages on the S8 Elite LCDReplace Page Using a Blank Module Using a Resscan Data Card ModuleS8 Modules Copy Data Onto the Data Card Using the Data Card to Update SettingsInsert the Data Card Remove the Data CardEnglish Page Weekly Cleaning Cleaning and MaintenanceDaily Cleaning Periodic CleaningReplacing the AIR Filter ServicingFrequently Asked Questions Can I USE MY S8 Elite if Mains AC Power is not AVAILABLE? Troubleshooting Problem Possible Cause SolutionCheck tube High Leak Settings Error Remove Card System Specifications S8 Elite no AccessoriesData Card ALL Devices Where Applicable Symbols Which Appear on the DeviceData Card Module RF emissions CISPR11 Group Page Recommended separation distance Separation distance according to frequency of transmitter Limited Warranty Product Warranty PeriodPage Index PCB
Related manuals
Manual 39 pages 19.68 Kb Manual 158 pages 44.94 Kb Manual 50 pages 57.93 Kb Manual 88 pages 45.08 Kb Manual 20 pages 25.84 Kb

s8 specifications

The ResMed S8 Escape is a highly regarded CPAP (Continuous Positive Airway Pressure) device designed for the treatment of obstructive sleep apnea. Known for its reliability and user-friendly features, the S8 Escape is part of ResMed’s S8 series, which combines advanced technologies with an emphasis on patient comfort.

One of the standout features of the S8 Escape is its AutoRamp technology, which helps patients gradually transition into their prescribed pressure settings. Instead of starting at the full pressure immediately, AutoRamp begins at a lower pressure, allowing users to fall asleep comfortably before automatically increasing to the prescribed level. This feature significantly improves the overall user experience as it reduces anxiety associated with the use of CPAP devices.

The S8 Escape also boasts a built-in air filter that enhances air quality and protects the device from dust and other particulates. Additionally, the device is designed for whisper-quiet operation, ensuring that users can sleep soundly without the disruption of noise, which can be a common issue with less advanced models. This creates a more peaceful sleeping environment, both for the user and their bed partner.

Another important characteristic of the S8 Escape is its compact design and lightweight build. It is easily portable, making it an ideal choice for both home use and travel. The device also features a user-friendly interface, with a simple LCD screen that displays essential information such as pressure settings and therapy time. This allows users to track their usage and monitor their therapy progress conveniently.

The S8 Escape offers various pressure settings and is compatible with a wide range of masks, ensuring that users can find the right fit for their individual needs. The device’s advanced monitoring capabilities also help in providing feedback on therapy effectiveness, allowing healthcare professionals to adjust settings if necessary.

In summary, the ResMed S8 Escape is a highly functional and patient-friendly CPAP device, featuring advanced technologies designed to enhance the user experience. Its AutoRamp technology, quiet operation, and compact design make it a popular choice among individuals dealing with obstructive sleep apnea.