ResMed s8 user manual System Specifications, S8 Elite no Accessories, Data Card

Page 38

SYSTEM SPECIFICATIONS

S8 ELITE (NO ACCESSORIES)

Performance: Operating pressure range: 4 to 20 cm H2O

Dimensions (H x W x D): 4.4” x 6.5” x 5.7” (112 mm x 164 mm x 145 mm)

Weight: 2.9 lb (1.3 kg)

Power Supply

•Input range for S8 ELITE with HUMIDAIRE 3i: 100–240 V, 50/60 Hz; 110 V, 400 Hz; 2.5 A <140 VA (110 W) (maximum power consumption). Instantaneous peak power consumption <340 VA.

•Refer to the DC-12 converter instructions for DC ratings. Only use the ResMed DC-12 converter for DC input.

Actual power consumption will vary, depending on factors such as the use of accessories, height above sea level, and ambient temperature. Power consumption values for typical treatment conditions (using a breathing machine set to 0.5 L and

15breaths/min with 6’6” (2 m) air tubing, and an ULTRA MIRAGE mask) are given in the following table

Device

Pressure

Power

Power

(cm H2O)

(VA)

(W)

 

S8 Elite

5

18

7.6

 

 

 

 

 

10

23

11.6

 

 

 

 

 

15

30

15.9

 

 

 

 

 

20

39

20.7

 

 

 

 

Power outlet for HumidAire 3i

Outlet range: 100–240V, 50/60Hz; 110V, 400Hz; 2.0A

Air Filter: Two-layered, powder-bonded, polyester non-woven fiber

Air Tubing: Flexible plastic, 6’6” (2 m)

Air Outlet: The 22 mm conical air outlet complies with EN 1281-1

IEC 60601-1 Classifications: Class II (double insulation), Type CF

Noise level: Radiated sound pressure is measured at <30 dBA at 10 cm H2O and 1 m (3’3.37”) according to ISO17510

ACCESSORIES

DATA CARD

Dimensions (L x W x D): 2.56” x 0.87” x 0.03” (65.04 mm x 22.15 mm x 0.85 mm)

ENGLISH

SYSTEM SPECIFICATIONS

37

Page 37 Page 39
Image 38
Page 37 Page 39
Contents S8 Elite System S8 Elite Blank Module / Module Vierge / Módulo EN Blanco Contents Limited Warranty Index S8 Elite no Accessories ALL Devices Where ApplicableYour Responsibility IntroductionMedical Information About the S8 ElitePage Adverse Effects S8 Elite System MasksResscan Data Card Module AccessoriesHumidifier Page Assemble the Mask HOW to USE the S8 EliteSET UP the S8 Elite Smartstart Start TreatmentStopping Treatment Using the MASK-FITTING Feature ExcelntDefinitions of Mask-Fit Star Rating HOW to Attach a Humidifier HOW to USE the Keypad Keypad KeysHOW to Change the Settings HOW to Select the Mask Type HOW to USE the Standard MenuHOW to Change the Expiratory Pressure Relief Setting Settings for mask types Mask Other Viewable InformationHOW to USE the Detailed Menu Used HRSHOW to ADD a Humidifier or Front CAP Settings MenuHOW to Change the Tube Length Servicing Menu Results MenuOptions Menu Messages on the S8 Elite LCDReplace Page S8 Modules Using a Blank ModuleUsing a Resscan Data Card Module Copy Data Onto the Data Card Using the Data Card to Update SettingsInsert the Data Card Remove the Data CardEnglish Page Weekly Cleaning Cleaning and MaintenanceDaily Cleaning Periodic CleaningReplacing the AIR Filter ServicingFrequently Asked Questions Can I USE MY S8 Elite if Mains AC Power is not AVAILABLE? Troubleshooting Problem Possible Cause SolutionCheck tube High Leak Settings Error Remove Card Data Card System SpecificationsS8 Elite no Accessories Data Card Module ALL Devices Where ApplicableSymbols Which Appear on the Device RF emissions CISPR11 Group Page Recommended separation distance Separation distance according to frequency of transmitter Limited Warranty Product Warranty PeriodPage Index PCB
Related manuals
Manual 39 pages 19.68 Kb Manual 158 pages 44.94 Kb Manual 50 pages 57.93 Kb Manual 88 pages 45.08 Kb Manual 20 pages 25.84 Kb

s8 specifications

The ResMed S8 Escape is a highly regarded CPAP (Continuous Positive Airway Pressure) device designed for the treatment of obstructive sleep apnea. Known for its reliability and user-friendly features, the S8 Escape is part of ResMed’s S8 series, which combines advanced technologies with an emphasis on patient comfort.

One of the standout features of the S8 Escape is its AutoRamp technology, which helps patients gradually transition into their prescribed pressure settings. Instead of starting at the full pressure immediately, AutoRamp begins at a lower pressure, allowing users to fall asleep comfortably before automatically increasing to the prescribed level. This feature significantly improves the overall user experience as it reduces anxiety associated with the use of CPAP devices.

The S8 Escape also boasts a built-in air filter that enhances air quality and protects the device from dust and other particulates. Additionally, the device is designed for whisper-quiet operation, ensuring that users can sleep soundly without the disruption of noise, which can be a common issue with less advanced models. This creates a more peaceful sleeping environment, both for the user and their bed partner.

Another important characteristic of the S8 Escape is its compact design and lightweight build. It is easily portable, making it an ideal choice for both home use and travel. The device also features a user-friendly interface, with a simple LCD screen that displays essential information such as pressure settings and therapy time. This allows users to track their usage and monitor their therapy progress conveniently.

The S8 Escape offers various pressure settings and is compatible with a wide range of masks, ensuring that users can find the right fit for their individual needs. The device’s advanced monitoring capabilities also help in providing feedback on therapy effectiveness, allowing healthcare professionals to adjust settings if necessary.

In summary, the ResMed S8 Escape is a highly functional and patient-friendly CPAP device, featuring advanced technologies designed to enhance the user experience. Its AutoRamp technology, quiet operation, and compact design make it a popular choice among individuals dealing with obstructive sleep apnea.
Top Page Image Contents