ResMed s8 user manual Cleaning and Maintenance, Daily Cleaning, Weekly Cleaning, Periodic Cleaning

Page 30

CLEANING AND MAINTENANCE

You should regularly carry out the cleaning and maintenance described in this section. Refer to your mask manual for detailed instructions.

DAILY CLEANING

MASK

Clean the mask according to the instructions supplied with the mask.

AIR TUBING

Disconnect the air tubing from the S8 ELITE (and humidifier, if used) and hang the tubing and mask in a clean, dry place until next use.

HUMIDIFIER

If you are using a humidifier, remove it from the S8 ELITE and clean it according to the instructions in the humidifier user’s manual.

WEEKLY CLEANING

1.Remove the air tubing from the S8 ELITE and the mask.

2.Wash the air tubing in warm water using mild detergent. Rinse thoroughly, hang, and allow to dry.

3.Before next use, assemble the mask and headgear according to the user instructions.

4.Reconnect the air tubing to the air outlet and mask.

PERIODIC CLEANING

1.Clean the exterior of the S8 ELITE with a damp cloth and mild liquid soap.

2.Check the air filter for blockage or holes (see “Replacing the Air Filter” on page 30).

WARNING

! • Beware of electric shock. Do not immerse the unit or power cord in water. Always unplug the unit before cleaning and be sure it is dry before plugging back in.

• The mask system and air tubing are subject to normal wear and tear. Inspect them regularly for damage.

ENGLISH

CLEANING AND MAINTENANCE

29

Page 29 Page 31
Image 30
Page 29 Page 31
Contents S8 Elite System S8 Elite Blank Module / Module Vierge / Módulo EN Blanco Contents Limited Warranty Index S8 Elite no Accessories ALL Devices Where ApplicableYour Responsibility IntroductionMedical Information About the S8 ElitePage Adverse Effects S8 Elite System MasksAccessories HumidifierResscan Data Card Module Page HOW to USE the S8 Elite SET UP the S8 EliteAssemble the Mask Start Treatment Stopping TreatmentSmartstart Using the MASK-FITTING Feature ExcelntDefinitions of Mask-Fit Star Rating HOW to Attach a Humidifier HOW to USE the Keypad Keypad KeysHOW to Change the Settings HOW to USE the Standard Menu HOW to Change the Expiratory Pressure Relief SettingHOW to Select the Mask Type Settings for mask types Mask Other Viewable InformationHOW to USE the Detailed Menu Used HRSSettings Menu HOW to Change the Tube LengthHOW to ADD a Humidifier or Front CAP Servicing Menu Results MenuOptions Menu Messages on the S8 Elite LCDReplace Page Using a Blank Module Using a Resscan Data Card ModuleS8 Modules Copy Data Onto the Data Card Using the Data Card to Update SettingsInsert the Data Card Remove the Data CardEnglish Page Weekly Cleaning Cleaning and MaintenanceDaily Cleaning Periodic CleaningReplacing the AIR Filter ServicingFrequently Asked Questions Can I USE MY S8 Elite if Mains AC Power is not AVAILABLE? Troubleshooting Problem Possible Cause SolutionCheck tube High Leak Settings Error Remove Card System Specifications S8 Elite no AccessoriesData Card ALL Devices Where Applicable Symbols Which Appear on the DeviceData Card Module RF emissions CISPR11 Group Page Recommended separation distance Separation distance according to frequency of transmitter Limited Warranty Product Warranty PeriodPage Index PCB
Related manuals
Manual 39 pages 19.68 Kb Manual 158 pages 44.94 Kb Manual 50 pages 57.93 Kb Manual 88 pages 45.08 Kb Manual 20 pages 25.84 Kb

s8 specifications

The ResMed S8 Escape is a highly regarded CPAP (Continuous Positive Airway Pressure) device designed for the treatment of obstructive sleep apnea. Known for its reliability and user-friendly features, the S8 Escape is part of ResMed’s S8 series, which combines advanced technologies with an emphasis on patient comfort.

One of the standout features of the S8 Escape is its AutoRamp technology, which helps patients gradually transition into their prescribed pressure settings. Instead of starting at the full pressure immediately, AutoRamp begins at a lower pressure, allowing users to fall asleep comfortably before automatically increasing to the prescribed level. This feature significantly improves the overall user experience as it reduces anxiety associated with the use of CPAP devices.

The S8 Escape also boasts a built-in air filter that enhances air quality and protects the device from dust and other particulates. Additionally, the device is designed for whisper-quiet operation, ensuring that users can sleep soundly without the disruption of noise, which can be a common issue with less advanced models. This creates a more peaceful sleeping environment, both for the user and their bed partner.

Another important characteristic of the S8 Escape is its compact design and lightweight build. It is easily portable, making it an ideal choice for both home use and travel. The device also features a user-friendly interface, with a simple LCD screen that displays essential information such as pressure settings and therapy time. This allows users to track their usage and monitor their therapy progress conveniently.

The S8 Escape offers various pressure settings and is compatible with a wide range of masks, ensuring that users can find the right fit for their individual needs. The device’s advanced monitoring capabilities also help in providing feedback on therapy effectiveness, allowing healthcare professionals to adjust settings if necessary.

In summary, the ResMed S8 Escape is a highly functional and patient-friendly CPAP device, featuring advanced technologies designed to enhance the user experience. Its AutoRamp technology, quiet operation, and compact design make it a popular choice among individuals dealing with obstructive sleep apnea.
Top Page Image Contents