ResMed s8 user manual Adverse Effects

Page 8

•Do not use the S8 ELITE if there are obvious external defects or unexplained changes in performance.

•Do not open the S8 ELITE case. There are no user serviceable parts inside. Repairs and internal servicing should only be performed by an authorized service agent.

•Explosion hazard—do not use in the vicinity of flammable anesthetics.

CAUTIONS

•At low pressures, the flow through the exhalation ports of your mask may not clear all exhaled gas from the tubing. Some rebreathing may occur.

•The airflow for breathing produced by this device can be as much as 11°F (6°C) higher than the temperature of the room. Caution should be exercised if the room temperature is warmer than 90°F (32°C).

•When AC mains power (100/240V AC) is not available, always use a ResMed DC-12 converter. (The DC-12 converter is available as an optional accessory.)

•If supplied, the RESSCAN™ Data Card module is designed for use with specific ResMed devices.

•Only use the RESSCAN Data Card module (if supplied) as specified in this manual.

Note: The above are general warnings and cautions. Specific warnings, cautions, and notes appear with the relevant instructions in the manual.

ADVERSE EFFECTS

Patients should report unusual chest pain, severe headache, or increased breathlessness to their prescribing physician. An acute upper respiratory tract infection may require temporary discontinuation of treatment.

The following side effects may arise during the course of therapy with the S8 device:

•drying of the nose, mouth, or throat

•nosebleed

•bloating

•ear or sinus discomfort

•eye irritation

•skin rashes

•chest discomfort.

ENGLISH

MEDICAL INFORMATION

7

Page 7 Page 9
Image 8
Page 7 Page 9
Contents S8 Elite System S8 Elite Blank Module / Module Vierge / Módulo EN Blanco Contents Limited Warranty Index S8 Elite no Accessories ALL Devices Where ApplicableIntroduction Medical InformationYour Responsibility About the S8 ElitePage Adverse Effects S8 Elite System MasksResscan Data Card Module AccessoriesHumidifier Page Assemble the Mask HOW to USE the S8 EliteSET UP the S8 Elite Smartstart Start TreatmentStopping Treatment Using the MASK-FITTING Feature ExcelntDefinitions of Mask-Fit Star Rating HOW to Attach a Humidifier HOW to USE the Keypad Keypad KeysHOW to Change the Settings HOW to Select the Mask Type HOW to USE the Standard MenuHOW to Change the Expiratory Pressure Relief Setting Settings for mask types Mask Other Viewable InformationHOW to USE the Detailed Menu Used HRSHOW to ADD a Humidifier or Front CAP Settings MenuHOW to Change the Tube Length Results Menu Options MenuServicing Menu Messages on the S8 Elite LCDReplace Page S8 Modules Using a Blank ModuleUsing a Resscan Data Card Module Using the Data Card to Update Settings Insert the Data CardCopy Data Onto the Data Card Remove the Data CardEnglish Page Cleaning and Maintenance Daily CleaningWeekly Cleaning Periodic CleaningReplacing the AIR Filter ServicingFrequently Asked Questions Can I USE MY S8 Elite if Mains AC Power is not AVAILABLE? Troubleshooting Problem Possible Cause SolutionCheck tube High Leak Settings Error Remove Card Data Card System SpecificationsS8 Elite no Accessories Data Card Module ALL Devices Where ApplicableSymbols Which Appear on the Device RF emissions CISPR11 Group Page Recommended separation distance Separation distance according to frequency of transmitter Limited Warranty Product Warranty PeriodPage Index PCB
Related manuals
Manual 39 pages 19.68 Kb Manual 158 pages 44.94 Kb Manual 50 pages 57.93 Kb Manual 88 pages 45.08 Kb Manual 20 pages 25.84 Kb

s8 specifications

The ResMed S8 Escape is a highly regarded CPAP (Continuous Positive Airway Pressure) device designed for the treatment of obstructive sleep apnea. Known for its reliability and user-friendly features, the S8 Escape is part of ResMed’s S8 series, which combines advanced technologies with an emphasis on patient comfort.

One of the standout features of the S8 Escape is its AutoRamp technology, which helps patients gradually transition into their prescribed pressure settings. Instead of starting at the full pressure immediately, AutoRamp begins at a lower pressure, allowing users to fall asleep comfortably before automatically increasing to the prescribed level. This feature significantly improves the overall user experience as it reduces anxiety associated with the use of CPAP devices.

The S8 Escape also boasts a built-in air filter that enhances air quality and protects the device from dust and other particulates. Additionally, the device is designed for whisper-quiet operation, ensuring that users can sleep soundly without the disruption of noise, which can be a common issue with less advanced models. This creates a more peaceful sleeping environment, both for the user and their bed partner.

Another important characteristic of the S8 Escape is its compact design and lightweight build. It is easily portable, making it an ideal choice for both home use and travel. The device also features a user-friendly interface, with a simple LCD screen that displays essential information such as pressure settings and therapy time. This allows users to track their usage and monitor their therapy progress conveniently.

The S8 Escape offers various pressure settings and is compatible with a wide range of masks, ensuring that users can find the right fit for their individual needs. The device’s advanced monitoring capabilities also help in providing feedback on therapy effectiveness, allowing healthcare professionals to adjust settings if necessary.

In summary, the ResMed S8 Escape is a highly functional and patient-friendly CPAP device, featuring advanced technologies designed to enhance the user experience. Its AutoRamp technology, quiet operation, and compact design make it a popular choice among individuals dealing with obstructive sleep apnea.
Top Page Image Contents