Inspection, Service and Maintenance Protocol

Section 8 • Required Inspection, Service, &

Maintenance

3.Inspection, Service and Maintenance Protocol

A.Bilge Area

Many of your boat’s systems have critical features located in the bilge area. A thorough and organized inspection of the bilge area will address many of these critical features. For example, engine oil leaks and fuel system leaks will show themselves as contamination on the surface of the liquid that remains in the bilge. When you see such contamination, you should look for its source.

Once or twice a year, pump the bilge areas dry and remove all loose dirt. Be sure that all the limber holes are open. Limber holes are the openings in the stringers that allow water to flow from the outboard areas of the bilge to the bilge sump.

Check the bilge pump float switch by moving it manually. (Figure 4.1.2) The bilge pump should start when the float switch is raised and should stop when lowered. If it does not, have it replaced before using your boat. The float switch should also move freely without sticking, if it does not, have it serviced or replaced before boating.

!WARNING

DO NOT USE FLAMMABLE SOLVENTS to clean any part of the bilge.

Fumes can accumulate and can be the source of an explosion.

2.Engine

Engine failure or malfunction, when away from shore, can be dangerous. Make certain you do the following each time you use the boat:

•Wipe off the engine to remove accumulated dust, grease and oil.

•Check all exposed nuts, bolts and screws for tightness.

•Inspect the belts for wear. If they do not require replacement, check and adjust the belt tension according to the engine manufacturer’s recommendation.

•Inspect engine wiring, and clean and tighten the terminals on the engine electrical system.

•Clean and lubricate the battery cables.

•Add distilled water to the battery cells as needed.

•Refer to your Engine Operator’s Manual for additional engine maintenance requirements.

3.Fuel System

•Inspect the entire fuel system for evidence of leakage, including the fuel tank fill lines and vents. Any stain around a joint could be an indication of a leak.

•Test all fittings with a wrench to be sure they are not loose, but do not forcefully overtighten the fittings.

•Clean fuel filters and vent screens.

1.Oil

If there is oil contamination, look for leaks in engine oil lines and engine gaskets. If parts of the bilge have been stained by oil, the stain can be removed using a bilge cleaner available from your dealer or a marine store.

!WARNING

Work on electrical wiring can create shock hazards or sparks.

Always shut off battery switch, breakers and/or pull fuses before checking electrical wiring or connectors.

8.4	33 Outlaw®

33 specifications

The Baja Marine 33 is a striking testament to the legacy of performance and design in the world of powerboats. Known for its impressive speed and agility, this vessel embodies the perfect blend of luxury and functionality, making it a favorite among boating enthusiasts.

One of the standout features of the Baja Marine 33 is its sleek, aerodynamic design, which plays a crucial role in enhancing its performance on the water. With a length of 33 feet, this boat is built for stability and precision, allowing for smooth navigation even in challenging conditions. The deep-V hull design is engineered to cut through waves effortlessly, providing a thrilling and comfortable ride.

Under the helm, the Baja Marine 33 is typically powered by robust engines that deliver exceptional horsepower. Many configurations include twin engines that can produce a total output exceeding 600 horsepower, allowing for exhilarating speeds and quick acceleration. This powertrain setup is complemented by advanced marine technologies, such as precise steering systems and responsive throttle controls, which make handling the boat intuitive and enjoyable.

The interior of the Baja Marine 33 is designed with comfort and luxury in mind. Spacious cabins provide ample seating for guests, with high-quality upholstery and elegant finishes that enhance the aesthetic appeal of the boat. Additionally, the layout often includes a well-equipped galley, allowing for convenient meal preparation during extended trips.

Safety has always been a priority in Baja's engineering, and the Baja Marine 33 is no exception. It features a range of safety systems, including high-quality navigation lights, a robust bilge pump system, and well-placed handrails to ensure that passengers can move about comfortably and securely.

Versatility is another hallmark of the Baja Marine 33. Whether it’s for day cruising, water sports, or just relaxing with friends and family, this boat can accommodate a range of activities. The ample deck space provides room for sunbathing, while strategically placed storage compartments keep the essentials organized and easily accessible.

In summary, the Baja Marine 33 is a powerful blend of performance, style, and comfort. With its cutting-edge technology, spacious interior, and superior handling, it continues to be a preferred choice for both seasoned mariners and newcomers to the boating world. Whether you’re racing across the waves or enjoying a leisurely day on the water, the Baja Marine 33 promises an unforgettable experience.