Baja Marine 33 Winterization Checklist for Boats Stored on Land, Topside and Supplies, Engine

Page 71

Section 8 • Required Inspection, Service, &

Maintenance

4.Wiring System

Check all wiring for proper support.

Check all wiring insulation for signs of fraying or chafing.

Check all terminals for corrosion - corroded terminals and connectors should be replaced or thoroughly cleaned.

Tighten all terminals securely and spray them with light marine preservative oil.

5.Fittings, Hoses and Clamps

Inspect the entire bilge area for evidence of damage or deterioration. Evidence of deterioration will first appear around hull fittings, hoses and clamps.

Straighten kinked hoses.

Replace any hose that does not feel pliable.

Check all hose clamps for tightness and corrosion. Corroded clamps must be replaced.

Check the nuts, bolts and screws that retain equipment, hoses, etc. in the bilge for tightness and corrosion. Corroded fasteners must be replaced.

B.Topside and Supplies

Once a year, you should undertake a thorough review of the topside equipment, as well as of the critical safety supplies on your boat.

Check cleats, rings, rails, etc. for loose or corroded fasteners, breaks, sharp edges, or other conditions that could lead to malfunction or unsafe use. Repair or replace as necessary.

Inspect PFDs (life jackets) for tears and deterioration.

Make certain you have enough PFDs on board for the maximum number of persons you can carry.

Check your first aid kit, making certain it is complete and that the items in it have not passed an expiration date.

Check the signaling equipment and emergency flares. Make sure all items are within their expiration dates.

Inspect the anchor, mooring, and towing lines. Repair or replace as required.

Check fire extinguishers for full charge.

4.Winterization Checklist for Boats Stored on Land

A.Boat Storage

Store boat in a bow high attitude.

Remove hull drain plug.

Pour one (1) pint (half-liter) of 50% water/ antifreeze mixture in each bilge pump sump.

B.Engine

Flush engine with fresh water.

Remove engine drain plugs.

Refer to your Engine Operator’s Manual for detailed information on preparing the engines for storage and winterization.

C.Battery(ies)

Remove from boat. Remove the negative (-) cable first, then the positive (+) cable.

Remove grease and dirt from top surface.

Grease terminal bolts.

Store on wooden pallet or thick plastic in a cool dry place. Do not store on concrete.

33 Outlaw®

8.5

Image 71
Contents Outlaw Baja MarineFor information call 1-865-971-6270 or fax Everyone that operates the boat should read this manual WelcomeThis page intentionally left blank Read, understand and use this manual IntroductionYou must learn to operate this boat as well as Manufacturer’s Certification Service, Parts and Repair for Your BoatHull Identification Number HIN About Your Express Limited Warranty Iii Ignition Protection Breakers and/or Fuses Speed changes you. TM Safe boating means SafetySafety Labels Carbon Monoxide Legally Mandated Minimum Required EquipmentFire Extinguishing System Carbon Monoxide Monitor Lifesaving Equipment Impaired Operation Additional Recommended Equipment for Safe OperationUnited States Power CapacityLoad Capacity PropellersMaintain Control Observe the safety rules listed belowStability General Considerations Chart Your CourseWeather Skiing Water SportsSwimming General Emergency SituationsFlooding, Swamping and Capsizing Medical EmergencyWater Rescue FirePropulsion, Control or Steering Failure Safety HotlinesCollisions and Leaking GroundingFuel and Oil Spillage International RequirementsEnvironmental Considerations Excessive Noise Waste DisposalWake/Wash Nautical Terms Key to Symbols on Controls & Prints Optional Only w/ fire port Baja Marine CorpThis Page Intentionally Left Blank Cleats Cleats must not be used for lifting General Boat ArrangementDocking /Lifting /Trailering Passenger Locations 2 Hull Propulsion System Basic Boat Dimensions and Clearances MetricGeneral Deck Layout FIG General Deck LayoutGear Shift and Throttle Control Power Trim Unit and GaugeDescription of Major Controls Trim Tabs Trailer SwitchTachometer and Hour Meter Ignition Shutdown SwitchEngine Alarm System Important GaugesNavigation and Anchor Lights Oil Pressure, Water Temperature, Voltmeter and Fuel GaugesPre-Launch, Launch and Post- Launch Checklist Using Your BoatFueling the Boat Trailer Launching and LoadingPersonal Flotation Devices BoardingStarting the Engine Passenger Instruction and LocationStopping the Engine Shifting to Drive the BoatHydraulic Steering Steering SystemsPower Steering System Power SteeringThis page intentionally left blank Drain Plug Bilge & Underwater GearBilge Fuel & Oil SpillageBilge Blowers MaintenanceMaintenance and Service Engines and Stern DriveImpact to Stern Drive Propeller Removal and InstallationGear case Anti-Siphon Valve Inboard/Outboard Engine Only Fuel SystemFuel System Static Electricity and the Fuel System Fueling PrecautionsBefore and During Fueling Checklist After Fueling Checklist This page intentionally left blank Electrical Systems Battery MaintenanceElectrical Systems Fuse Panel Electrolytic Corrosion & Zinc AnodesBreakers and/or Fuses Marine Electronic Cathodic Anti-corrosion System Mercathode Ignition Switch Drive Pump with K-Plane Trim Tabs FIG Switch Panel Wire Information FIG Fuse Panel Wire Diagram FIG This Page Intentionally Left Blank Options & Accessories Locations Options & AccessoriesCanvas Automatic Fire Extinguisher System OptionFire Extinguisher Port Horn Canvas Care and MaintenanceSwim Platform w/ Ladder Optional Depth Finder OptionalHead Systems Stereo SystemStandard performance system Optional performance systemPortable Head with Pump-Out Exhaust SystemsCorsa Performance Quick & Quiet II option This page intentionally left blank Interval Required Inspection, Service MaintenanceSummary Guide for Inspection, Service and Maintenance Interval Summary Guide For Inspection, Service and MaintenanceUseful Service Information Bilge Area Inspection, Service and Maintenance ProtocolBoat Storage Winterization Checklist for Boats Stored on LandBatteryies Topside and SuppliesMiscellaneous Fitting Out After StorageFuel Systems Fuel SystemSecurity Considerations Power Steering System MaintenanceBoat Systems Quick Reference ChecklistBoarding the Boat General Starting the Engine Returning to Port General Quick Reference Checklist cont’d Departing GeneralIf the Engine Does Not Start Quick Reference Checklist cont’dSecuring the Boat Equipment Proper Operating Condition After Market Equipment ChecklistMaintenance Log Maintenance Log Cont’d Fiberglass & Gelcoat Paint Cleaning Agents & Other SubstancesCare & Refinishing Stains & ScratchesCanvas and Clear Vinyl Permanently Moored or Docked BoatsTopside Areas Acrylic Plastic Sheeting Plastic GlassInterior Upholstery Fabric Exterior Upholstery FabricThis Page Intentionally Left Blank Index Index Outlaw

33 specifications

The Baja Marine 33 is a striking testament to the legacy of performance and design in the world of powerboats. Known for its impressive speed and agility, this vessel embodies the perfect blend of luxury and functionality, making it a favorite among boating enthusiasts.

One of the standout features of the Baja Marine 33 is its sleek, aerodynamic design, which plays a crucial role in enhancing its performance on the water. With a length of 33 feet, this boat is built for stability and precision, allowing for smooth navigation even in challenging conditions. The deep-V hull design is engineered to cut through waves effortlessly, providing a thrilling and comfortable ride.

Under the helm, the Baja Marine 33 is typically powered by robust engines that deliver exceptional horsepower. Many configurations include twin engines that can produce a total output exceeding 600 horsepower, allowing for exhilarating speeds and quick acceleration. This powertrain setup is complemented by advanced marine technologies, such as precise steering systems and responsive throttle controls, which make handling the boat intuitive and enjoyable.

The interior of the Baja Marine 33 is designed with comfort and luxury in mind. Spacious cabins provide ample seating for guests, with high-quality upholstery and elegant finishes that enhance the aesthetic appeal of the boat. Additionally, the layout often includes a well-equipped galley, allowing for convenient meal preparation during extended trips.

Safety has always been a priority in Baja's engineering, and the Baja Marine 33 is no exception. It features a range of safety systems, including high-quality navigation lights, a robust bilge pump system, and well-placed handrails to ensure that passengers can move about comfortably and securely.

Versatility is another hallmark of the Baja Marine 33. Whether it’s for day cruising, water sports, or just relaxing with friends and family, this boat can accommodate a range of activities. The ample deck space provides room for sunbathing, while strategically placed storage compartments keep the essentials organized and easily accessible.

In summary, the Baja Marine 33 is a powerful blend of performance, style, and comfort. With its cutting-edge technology, spacious interior, and superior handling, it continues to be a preferred choice for both seasoned mariners and newcomers to the boating world. Whether you’re racing across the waves or enjoying a leisurely day on the water, the Baja Marine 33 promises an unforgettable experience.