Dell 8 manual Interface vfc101

Resource	Prerequisites
	• Instantiate but do not configure the upstream
	port-channel (LAG) to the core /aggregation
	switch.
	• Instantiate but do not configure the
	downstream port-channel (LAG) to the IOA4.
	• Create the VFC interface to bind to the servers
	CNA FIP MAC address. This can be located in
	the CMC WWN table or the IDRAC page for the
	server.
	For Example
	interface vfc101
	bind mac-address 5C:F9:DD:16:EF:07
	no shutdown
	interface vfc102
	bind mac-address 5C:F9:DD:16:EF:21
	no shutdown
	• Move back into the VSAN database and create
	entries for the new VFC just created and create
	entries for the FC port(s) that will be used.
	vsan database
	vsan 2 interface vfc101
	vsan 2 interface vfc102
	vsan 2 interface fc2/1
	vsan 2 interface fc2/2
	NOTE: All the Compellent ports needs to
	part of the same VSAN.
Compellent	Create fault domain as per Compellent best
	practices.

Prerequisites for M1000e (with MXL), Cisco Nexus, Brocade, and Dell Compellent

The following table describes the prerequisites for the FCoE solution offered using M1000e (with MXL), Cisco Nexus, Brocade, and Dell Compellent. For more information, see http://en.community.dell.com/ techcenter/extras/m/white_papers/20387203

Resource	Prerequisites
MXL	• DCB needs to be enabled.
	• VLT needs to be disabled.
	• FIP Snooping feature needs to be enabled on
	the MXL.
	conf
	Feature fip-snooping

19