Resource | Prerequisites |
configuration. (Ensure to back up the configuration before enabling the feature).
conf feature npv
• Enable required features.
feature fcoe feature npiv feature lacp
• Create VSAN-instantiate it in the VSAN database.
conf
vsan database vsan <vsan id>
• Configure regular Ethernet VLANs, and then the FCoE VLAN is created with an assignment to its respective VSAN.
vlan <fcoe vlan> fcoe vsan <vsan>
• Instantiate but do not configure the upstream
• Instantiate but do not configure the downstream
• Create the VFC interface to bind to the servers CNA FIP MAC address. This can be located in the CMC WWN table or the iDRAC page for the server.
For Example:
interface vfc101
bind
interface vfc102
bind
• Move back into the VSAN database and create entries for the new VFC just created and create entries for the FC ports that are used.
vsan database
vsan 2 interface vfc101
vsan 2 interface vfc102
vsan 2 interface fc2/1
vsan 2 interface fc2/2
22