Dell 8 manual Enable Http or HTTPs for NFS share, Configuring NetApp Storage Component

sudo patch /etc/pupetlabs/puppet/modules/netapp/lib/puppet/util/ network_device/netapp/NaServer.rb < /tmp/NaServer.patch

8.Update the permissions on the NetApp module. To update the permissions, run the following command:

sudo chmod 755 /etc/puppetlabs/puppet/modules/netapp/lib/puppet/util/ network_device/netapp/*

9.Change the owner of the files. To change the owner of the files, run the following command:

sudo chown pe-puppet:pe-puppet /etc/puppetlabs/puppet/modules/netapp/lib/ puppet/util/network_device/netapp/*

Enable HTTP or HTTPs for NFS share

Connect to the NetApp Filer using ssh and run the option httpcommand to see the current settings. If the property httpd.admin.ssl is set to off, then run the command option httpd.admin.ssl.enable on to enable HTTPS.

ADC-NetApp01> options http httpd.access legacy httpd.admin.access legacy httpd.admin.enable on httpd.admin.hostsequiv.enable on httpd.admin.max_connections 512 httpd.admin.ssl.enable on httpd.admin.top-page.authentication on httpd.autoindex.enable on httpd.bypass_traverse_checking on httpd.enable on httpd.ipv6.enable off

httpd.log.format common(value might be overwritten in takeover) httpd.method.trace.enable off

httpd.rootdir /vol/vol0/home/http

httpd.timeout 300(value might be overwritten in takeover) httpd.timewait.enable off(value might be overwritten in takeover ADC-NetApp01>

Configuring NetApp Storage Component

The following settings must be configured in the NetApp storage component.

For more information about NetApp Storage Component, see Active System Manager version 8.0 User’s Guide.

•Target NetApp

•Storage Value

•New Volume Name

•Storage Size

•Aggregate Name

•The Space Reservation Mode

•Snapshot percentage

35