Dell 8 manual System Center Virtual Machine Manager Scvmm Prerequisites

Page 24

Resource

Prerequisites

 

 

Dell Compellent

Create fault domain as per Dell Compellent best

 

practices.

System Center Virtual Machine Manager (SCVMM) Prerequisites

ASM manages resource on Microsoft System Center Virtual Machine Manager through Windows Remote Management (WinRM). Windows RM must be enabled on the SCVMM server as well as on Active Directory and DNS servers used in SCVMM/HyperV deployments. ASM deployments support Active Directory and DNS servers which exist on the same machine. If Active Directory and DNS servers exist on separate machines, some manual tare-down may be required to remove host entries from the DNS server. ASM requires Windows RM to utilize default port and basic authentication. To enable these settings, on the SCVMM server and on the Active Directory and DNS server used in HyperV deployments, open a Windows PowerShell interface with administrator permissions and run the following commands:

winrm set winrm/config/client/auth '@{Basic="true"}' winrm set winrm/config/service/auth '@{Basic="true"}' winrm set winrm/config/service '@{AllowUnencrypted="true"}'

The default amount of memory allocated for WinRM processes is limited to 150 MB. To avoid out of memory errors, increase the memory size to 1024:

winrm set winrm/config/winrs '@{MaxMemoryPerShellMB="1024"}'

For Windows 2008:

winrm quickconfig

NOTE: There is a known issue with WMF 3.0. The MaxMemoryPerShellMB configuration may be ignored. For more information, see KB2842230. The fix for Windows 8/Windows 2012 x64 (non R2) is available at the following link. The fix is not necessary for Windows 2012 R2.

Make sure the SCVMM has its time synchronized with time of the associated timer server. If the SCVMM timer is set to 'off' mode by using the deployed Hyper-V hosts, you cannot add hosts and create clusters in SCVMM.

Deploying ASM from VMware vSphere Client

1.Extract the .zip file to a location accessible by VMware vSphere Client. It is recommended to use a local drive or CD/DVD, because installing from a network location can take up to 30 minutes.

2.In vSphere Client, select File Deploy OVF Template. The Deploy OVF Template wizard displays.

3.On the Source page, click Browse, and then select the OVF package. Click Next to continue.

4.On the OVF Template Details page, review the information that is displayed. Click Next to continue.

5.On the End User License Agreement page, read the license agreement and click Accept. To continue, click Next.

6.On the Name and Location page, enter a name with up to 80 characters and then, select an Inventory Location where the template will be stored. Click Next to continue.

7.Depending on the vCenter configuration, one of the following options display:

If resource pools are configured — On the Resource Pool page, select the pool of virtual servers to deploy the appliance virtual machine.

If resource pools are NOT configured — On the Hosts/Clusters page, select the host or cluster on which you want to deploy the appliance virtual machine.

24

Image 24
Contents Active System Manager Version 8.0 Quick Installation Guide Page Contents Configuring Dhcp or PXE on External Servers What is New in this Release Accessing Online HelpAbout this Document Other Documents You May Need LicensingImportant Note ASM Port and Protocol Information Installing Active System Manger Information PrerequisitesDeployment Prerequisites Page Page Prerequisites for M1000e with MXL, S5000, and Compellent MXLInterface range fi 0/0 7 no shut Prerequisites for Rack Server, S5000, and Compellent Dcbx port-role auto-downstream Prerequisites for Rack Server, S5000, Brocade and Compellent Interface vlan Vlan ID Create Vlan for FCoE Exit Feature fcoe feature npiv feature lacp Prerequisites for Rack Server, Cisco Nexus, and Compellent Interface vfc101 Conf feature npv Resource Create VSAN-instantiate it in the Vsan database FC feature needs to be enabled on the MXL System Center Virtual Machine Manager Scvmm Prerequisites Deploying ASM from VMware vSphere ClientDeploying ASM using Scvmm Deploying ASM on Hyper-V host Changing Dell Administrator Password Configuring Static IP Address in the Virtual ApplianceConfiguring ASM Virtual Appliance as PXE Boot Responder Customizing Virtual Machine Templates for VMware and Hyper-V Main Server=dellasm Master Agent Customizing Linux Template Rm /lib/udev/rules.d/75-persistent-net-generator.rulesCustomizing Windows Template Crontab -lPage Adding NetApp Ruby SDK Enable Http or HTTPs for NFS share Configuring NetApp Storage ComponentPage Completing Initial Configuration Page Deploying WinPE on the Virtual Appliance Adding OS Image Repositories Page Page Configure Dhcp on Windows 2012 Dhcp Server Create the Dhcp User ClassCreate the Boot File Scope Option Configure Dhcp on Windows 2008 Dhcp ServerCreate the Dhcp Policy Create the Dhcp User Class Configuring Dhcp for Linux Sample Dhcp Configuration
Related manuals
Manual 36 pages 54.81 Kb