Dell 8 manual Configuring ASM Virtual Appliance as PXE Boot Responder

Page 28

10.For Hyper-V only, reboot ASM virtual appliance.

Configuring ASM Virtual Appliance as PXE Boot Responder

ASM requires both PXE and DHCP network services to function. ASM may be configured to act as the DHCP server and PXE responder on a PXE network if one is not present in the environment. This can be configured through the Getting Started menu for appliance setup in the ASM user interface. If an external DHCP or PXE server is used for the PXE network, follow the instructions in the section Configuring DHCP or PXE on External Servers.

28

Image 28
Contents Active System Manager Version 8.0 Quick Installation Guide Page Contents Configuring Dhcp or PXE on External Servers Accessing Online Help What is New in this ReleaseAbout this Document Licensing Other Documents You May NeedImportant Note ASM Port and Protocol Information Information Prerequisites Installing Active System MangerDeployment Prerequisites Page Page Prerequisites for M1000e with MXL, S5000, and Compellent MXLInterface range fi 0/0 7 no shut Prerequisites for Rack Server, S5000, and Compellent Dcbx port-role auto-downstream Prerequisites for Rack Server, S5000, Brocade and Compellent Interface vlan Vlan ID Create Vlan for FCoE Exit Feature fcoe feature npiv feature lacp Prerequisites for Rack Server, Cisco Nexus, and Compellent Interface vfc101 Conf feature npv Resource Create VSAN-instantiate it in the Vsan database FC feature needs to be enabled on the MXL System Center Virtual Machine Manager Scvmm Prerequisites Deploying ASM from VMware vSphere ClientDeploying ASM using Scvmm Deploying ASM on Hyper-V host Changing Dell Administrator Password Configuring Static IP Address in the Virtual ApplianceConfiguring ASM Virtual Appliance as PXE Boot Responder Customizing Virtual Machine Templates for VMware and Hyper-V Main Server=dellasm Master Agent Customizing Linux Template Rm /lib/udev/rules.d/75-persistent-net-generator.rulesCustomizing Windows Template Crontab -lPage Adding NetApp Ruby SDK Enable Http or HTTPs for NFS share Configuring NetApp Storage ComponentPage Completing Initial Configuration Page Deploying WinPE on the Virtual Appliance Adding OS Image Repositories Page Page Configure Dhcp on Windows 2012 Dhcp Server Create the Dhcp User ClassConfigure Dhcp on Windows 2008 Dhcp Server Create the Boot File Scope OptionCreate the Dhcp Policy Create the Dhcp User Class Configuring Dhcp for Linux Sample Dhcp Configuration
Related manuals
Manual 36 pages 54.81 Kb