Graco SDP15, SDM15, SDM5, SDP5 Units/Limit Screen FIG, For All Meters, Manual Meters Preset Meters

Page 15

Setup Mode Screens

Units/Limit Screen (FIG. 13)

For All Meters

Sets the units of measurement to pints, quarts, liters, or gallons.

Manual Meters

Preset Meters

 

UNITS = QTS C

QTS

 

 

E

D

 

 

 

 

 

 

 

 

 

UNITS = QTS C

G MANUAL LIMIT = 5.0

E

 

F

5.0

D

QTS

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

ti12191a

FIG. 13

Units/Limit Screen Features (FIG. 13)

 

All meters include C - E

Preset meters also include F - G

C. Units Mode: Displays measurement unit that was

F. Set Manual Dispense Limit field: Sets maximum

selected using the Set Measurement Units

quantity of fluid that can be dispensed in Manual Mode.

button (E).

To change/set the Manual Dispense Limit:

D. Wrench Icon: Returns user to Main Setup Screen.

1. Use RIGHT ARROW to move curser to Manual Dis-

E. Set Measurement Units button/field: Sets unit of

pense Limit field (F).

measurement as pint, quart, gallon or liter.

2. Use UP or DOWN ARROWS to increase and

 

To change/set the Unit of Measurement:

decrease displayed amount.

1. Use LEFT or RIGHT ARROW to move curser to the

3. When amount you want to use is shown in field,

press center, ENTER button to confirm amount.

Set Measurement field (E).

Confirmed amount displays on screen (G).

 

2. Use UP or DOWN ARROWS to display measure-

4. When you have finished making changes, use the

ment unit choices: PTS, QTS, L, GAL.

RIGHT ARROW button to move curser over Wrench

 

3. Press center, ENTER button to confirm selection.

icon.

Selected measurement unit is displayed on screen

5. Press center, ENTER button to return to Main Setup

(C).

Screen.

 

4. When you are finished making changes, use the

G. Manual Limit Confirmation: Displays maximum

RIGHT ARROW to move curser over Wrench icon.

quantity of fluid that can be manually dispensed at one

 

5. Press center, ENTER button to return to Main Setup

time. Amount is assigned on the task bar Set Manual

Screen.

Dispense Limit field (F). Preset dispense amounts are

 

not affected by the manual dispense limit you set.

312865R

15

Page 14 Page 16
Image 15
Page 14 Page 16
Contents List of Models Important Safety InstructionsExtension Description ModelsSDM5 Manual Dispense Electronic Meters Model NumberExtension Description Nozzle Fluid Type SDM15 Manual Dispense Electronic MetersSDP5 Preset Dispense Electronic Meters SDP15 Preset Dispense Electronic Meters Skin Injection Hazard Fire and Explosion Hazard Drum Mount Bracket FIG InstallationTypical Installations FIG Mounting Bracket FIGGrounding Pressure Relief ProcedurePre-Installation Procedure Installation ProcedureInstalling Tube Extension FIG Installing Meter FIGInstalling Nozzle FIG Meter Display Meter OverviewNavigation and Modes Way Menu Navigation Button FIGManual Meters Setup Mode ScreensPreset Meters To display the Home ScreenAll Meters Main Setup Screen FIGDisplaying Setup Screen from an Operation Mode Screen Main Screen Features FIGFor All Meters Manual Meters Preset MetersAll meters include C E Preset meters also include F G Units/Limit Screen FIGCalibrate Screen FIG Calibration NumberFluids To attain the most accurate calibration Manual Calibration ProcedureRecalibrating the Meter FIG Choosing a Calibration Factor From the Calibration TableTo set Preset amounts FIG Preset Screen FIGFor Preset Meters Only Preset Meters include D, P and QLanguage Screen FIG Banner Screen Features D and RLanguage Screen Features D, S, and T Banner Screen FIGAll Meters include Include a D Dispensing Fluid and Operation Mode ScreensHome Screen FIG All Meters Manual MetersManual Dispense FIG To reset counter to zero after a dispenseTo dispense in Manual Mode Preset shownSee for terms D L Preset Dispense FIGTo modify the amount selected QTS50 QTS To dispense in Preset ModeTotals Screen FIG See for terms F, G, M PTo display Totals Screen Troubleshooting Problem Cause SolutionDo not trigger meter when nozzle Troubleshooting Err Error CodesError Code Cause Solution Manual Mode onlyReplacing the Battery ServiceDisassembly Trip Rod RepairSDP5 & SDP15 Meters Only Remove and discard o-ring 5 FIG Cleaning Trip Rod Reassembly Ti11938ab Replace 4 screws A. Torque each to 15-25 inch pounds SDM5 & SDM15 Manual Meters Parts Ref Part DescriptionQty Part Description 18a Part Description Qty SDP5 & SDP 15 Preset Meters Parts34c 34b 24d 24c 31a 24b 24a 24e 24f Nozzle 33 and Extension 20 Kits Nozzle 33 and Extension 20 Kits Nozzle 33 Kits Thermal Relief KitsPart No. Description PSI bar Rating Technical Data Graco Information Graco Extended Metered Dispense Valve Warranty

SDP5, SDM5, SDM15, SDP15 specifications

The Graco SDP15, SDM15, SDM5, and SDP5 are innovative airless paint sprayers popular among both professionals and DIY enthusiasts. They represent a range of features and technologies that optimize painting efficiency, precision, and reliability.

The Graco SDP15 is designed for extensive projects and professional use. It boasts an impressive maximum operating pressure of 3000 PSI, allowing for smooth and even application of a variety of coatings, including heavier materials like paints and stains. One of its standout features is the ProControl system, which enables users to adjust the pressure settings on-the-fly, ensuring optimal performance for different surfaces and materials.

The SDM15 is another powerful option, particularly suited for medium to large jobs. This model features a robust motor and a compact design, making it both durable and portable. It includes an easy-to-use Control Pro technology, which minimizes overspray while delivering an even finish. Additionally, the SDM15 integrates a built-in filter, enhancing the longevity of the pump by preventing debris from clogging the system.

For lighter tasks or smaller projects, the Graco SDM5 and SDP5 models are excellent choices. The SDM5 is valued for its lightweight design and ease of maneuverability. It has a suitable PSI range for home improvement tasks, allowing for an efficient painting experience without the complexity. The convenient compact storage feature makes it ideal for homeowners and occasional users.

On the other hand, the SDP5 is specifically designed for users who prioritize user-friendliness. It includes features like a flexible suction tube, allowing users to paint directly from the can, reducing cleanup. The SDP5 also incorporates Graco’s exclusive SmartControl technology, ensuring consistent power and pressure throughout the spraying process.

All four models share key technologies such as the stainless-steel piston pump, which enhances durability and lifespan and the ability to handle a wide array of coatings without the need for thinning.

In conclusion, whether for professional use with the SDP15 and SDM15 or for home projects with the SDM5 and SDP5, Graco's lineup provides a range of versatile, efficient, and user-friendly options. Their focus on technology and practical features makes them a top choice for all painting needs.
Top Page Image Contents