Graco SDP5, SDM15, SDM5, SDP15 important safety instructions Ti11938ab

Page 34

Service

8.Reinstall reed switch board in meter housing. Use 2 screws (D) to secure reed switch PCB to cover plate. Tighten screws until they bottom out.

ti11940a

FIG. 47

9.Reconnect lead (B) to battery by carefully sliding connector over battery terminals (E) until it snaps securely into place under clip (D) (FIG. 48).

ti11938ab

FIG. 48

NOTICE

Do not use a screw driver or any other tool to lift up clip (D) when reconnecting battery lead (B). If the clip is damaged or broken it cannot be repaired; you will have to replace the battery module. Order Part No. 255197.

10.Reconnect solenoid lead (C) (FIG. 49).

ti11939a

FIG. 49

11. Position cover over meter housing.

NOTICE

When replacing cover, be careful not to pinch wires.

312865R

Image 34

Contents Important Safety Instructions List of ModelsModel Number ModelsSDM5 Manual Dispense Electronic Meters Extension DescriptionSDM15 Manual Dispense Electronic Meters Extension Description Nozzle Fluid TypeSDP5 Preset Dispense Electronic Meters SDP15 Preset Dispense Electronic Meters Skin Injection Hazard Fire and Explosion Hazard Mounting Bracket FIG InstallationTypical Installations FIG Drum Mount Bracket FIGInstallation Procedure Pressure Relief ProcedurePre-Installation Procedure GroundingInstalling Meter FIG Installing Tube Extension FIGInstalling Nozzle FIG Way Menu Navigation Button FIG Meter OverviewNavigation and Modes Meter DisplayTo display the Home Screen Setup Mode ScreensPreset Meters Manual MetersMain Screen Features FIG Main Setup Screen FIGDisplaying Setup Screen from an Operation Mode Screen All MetersUnits/Limit Screen FIG Manual Meters Preset MetersAll meters include C E Preset meters also include F G For All MetersCalibration Number Calibrate Screen FIGFluids Choosing a Calibration Factor From the Calibration Table Manual Calibration ProcedureRecalibrating the Meter FIG To attain the most accurate calibrationPreset Meters include D, P and Q Preset Screen FIGFor Preset Meters Only To set Preset amounts FIGBanner Screen FIG Banner Screen Features D and RLanguage Screen Features D, S, and T Language Screen FIGAll Meters Manual Meters Dispensing Fluid and Operation Mode ScreensHome Screen FIG All Meters include Include a DPreset shown To reset counter to zero after a dispenseTo dispense in Manual Mode Manual Dispense FIGPreset Dispense FIG See for terms D LQTS To modify the amount selectedTo dispense in Preset Mode 50 QTSSee for terms F, G, M P Totals Screen FIGTo display Totals Screen Problem Cause Solution TroubleshootingDo not trigger meter when nozzle Troubleshooting Manual Mode only Error CodesError Code Cause Solution ErrService Replacing the BatteryTrip Rod Repair DisassemblySDP5 & SDP15 Meters Only Remove and discard o-ring 5 FIG Cleaning Trip Rod Reassembly Ti11938ab Replace 4 screws A. Torque each to 15-25 inch pounds Ref Part Description SDM5 & SDM15 Manual Meters PartsQty Part Description 18a SDP5 & SDP 15 Preset Meters Parts Part Description Qty34c 34b 24d 24c 31a 24b 24a 24e 24f Nozzle 33 and Extension 20 Kits Nozzle 33 and Extension 20 Kits Thermal Relief Kits Nozzle 33 KitsPart No. Description PSI bar Rating Technical Data Graco Extended Metered Dispense Valve Warranty Graco Information

SDP5, SDM5, SDM15, SDP15 specifications

The Graco SDP15, SDM15, SDM5, and SDP5 are innovative airless paint sprayers popular among both professionals and DIY enthusiasts. They represent a range of features and technologies that optimize painting efficiency, precision, and reliability.

The Graco SDP15 is designed for extensive projects and professional use. It boasts an impressive maximum operating pressure of 3000 PSI, allowing for smooth and even application of a variety of coatings, including heavier materials like paints and stains. One of its standout features is the ProControl system, which enables users to adjust the pressure settings on-the-fly, ensuring optimal performance for different surfaces and materials.

The SDM15 is another powerful option, particularly suited for medium to large jobs. This model features a robust motor and a compact design, making it both durable and portable. It includes an easy-to-use Control Pro technology, which minimizes overspray while delivering an even finish. Additionally, the SDM15 integrates a built-in filter, enhancing the longevity of the pump by preventing debris from clogging the system.

For lighter tasks or smaller projects, the Graco SDM5 and SDP5 models are excellent choices. The SDM5 is valued for its lightweight design and ease of maneuverability. It has a suitable PSI range for home improvement tasks, allowing for an efficient painting experience without the complexity. The convenient compact storage feature makes it ideal for homeowners and occasional users.

On the other hand, the SDP5 is specifically designed for users who prioritize user-friendliness. It includes features like a flexible suction tube, allowing users to paint directly from the can, reducing cleanup. The SDP5 also incorporates Graco’s exclusive SmartControl technology, ensuring consistent power and pressure throughout the spraying process.

All four models share key technologies such as the stainless-steel piston pump, which enhances durability and lifespan and the ability to handle a wide array of coatings without the need for thinning.

In conclusion, whether for professional use with the SDP15 and SDM15 or for home projects with the SDM5 and SDP5, Graco's lineup provides a range of versatile, efficient, and user-friendly options. Their focus on technology and practical features makes them a top choice for all painting needs.