Graco SDM5, SDM15, SDP5, SDP15 important safety instructions Reassembly

Page 33

Reassembly

Use all the new parts provided in the kit. Do not reuse the old parts.

1.Insert balls (3) in trip rod (2) (FIG. 42).

2.Slide spring (1) over trip rod (2) (FIG. 42).

Service

5.Install trigger assembly (8) (FIG. 44). Push pin (19) through holes in trigger and trip rod assembly.

8

2

3

19

ti12015a

 

FIG. 44

2

 

6. Install solenoid (12). Finger tighten securely.

 

 

1

 

 

12

 

 

 

 

 

 

 

 

 

ti12014a

 

 

 

FIG. 42

 

 

 

 

 

 

 

 

 

3. Insert trip rod assembly in opening in meter housing

ti12238a

(FIG. 43).

 

 

 

FIG. 43

4.Turn meter over and place in vise. Align holes in trigger assembly with holes in trip rod (2). Use the old trip rod or a non-metal rod or dowel to push trip rod up and out of the meter housing (FIG. 44) far enough to see hole for pin (19) to slide into, how- ever, do not install pin in this step.

FIG. 45

7.Install o-ring (5).

5

ti11941a

FIG. 46

312865R

33

Image 33
Contents List of Models Important Safety InstructionsSDM5 Manual Dispense Electronic Meters ModelsModel Number Extension DescriptionExtension Description Nozzle Fluid Type SDM15 Manual Dispense Electronic MetersSDP5 Preset Dispense Electronic Meters SDP15 Preset Dispense Electronic Meters Skin Injection Hazard Fire and Explosion Hazard Typical Installations FIG InstallationMounting Bracket FIG Drum Mount Bracket FIGPre-Installation Procedure Pressure Relief ProcedureInstallation Procedure GroundingInstalling Tube Extension FIG Installing Meter FIGInstalling Nozzle FIG Navigation and Modes Meter OverviewWay Menu Navigation Button FIG Meter DisplayPreset Meters Setup Mode ScreensTo display the Home Screen Manual MetersDisplaying Setup Screen from an Operation Mode Screen Main Setup Screen FIGMain Screen Features FIG All MetersAll meters include C E Preset meters also include F G Manual Meters Preset MetersUnits/Limit Screen FIG For All MetersCalibrate Screen FIG Calibration NumberFluids Recalibrating the Meter FIG Manual Calibration ProcedureChoosing a Calibration Factor From the Calibration Table To attain the most accurate calibrationFor Preset Meters Only Preset Screen FIGPreset Meters include D, P and Q To set Preset amounts FIGLanguage Screen Features D, S, and T Banner Screen Features D and RBanner Screen FIG Language Screen FIGHome Screen FIG Dispensing Fluid and Operation Mode ScreensAll Meters Manual Meters All Meters include Include a DTo dispense in Manual Mode To reset counter to zero after a dispensePreset shown Manual Dispense FIGSee for terms D L Preset Dispense FIGTo modify the amount selected QTS50 QTS To dispense in Preset ModeTotals Screen FIG See for terms F, G, M PTo display Totals Screen Troubleshooting Problem Cause SolutionDo not trigger meter when nozzle Troubleshooting Error Code Cause Solution Error CodesManual Mode only ErrReplacing the Battery ServiceDisassembly Trip Rod RepairSDP5 & SDP15 Meters Only Remove and discard o-ring 5 FIG Cleaning Trip Rod Reassembly Ti11938ab Replace 4 screws A. Torque each to 15-25 inch pounds SDM5 & SDM15 Manual Meters Parts Ref Part DescriptionQty Part Description 18a Part Description Qty SDP5 & SDP 15 Preset Meters Parts34c 34b 24d 24c 31a 24b 24a 24e 24f Nozzle 33 and Extension 20 Kits Nozzle 33 and Extension 20 Kits Nozzle 33 Kits Thermal Relief KitsPart No. Description PSI bar Rating Technical Data Graco Information Graco Extended Metered Dispense Valve Warranty

SDP5, SDM5, SDM15, SDP15 specifications

The Graco SDP15, SDM15, SDM5, and SDP5 are innovative airless paint sprayers popular among both professionals and DIY enthusiasts. They represent a range of features and technologies that optimize painting efficiency, precision, and reliability.

The Graco SDP15 is designed for extensive projects and professional use. It boasts an impressive maximum operating pressure of 3000 PSI, allowing for smooth and even application of a variety of coatings, including heavier materials like paints and stains. One of its standout features is the ProControl system, which enables users to adjust the pressure settings on-the-fly, ensuring optimal performance for different surfaces and materials.

The SDM15 is another powerful option, particularly suited for medium to large jobs. This model features a robust motor and a compact design, making it both durable and portable. It includes an easy-to-use Control Pro technology, which minimizes overspray while delivering an even finish. Additionally, the SDM15 integrates a built-in filter, enhancing the longevity of the pump by preventing debris from clogging the system.

For lighter tasks or smaller projects, the Graco SDM5 and SDP5 models are excellent choices. The SDM5 is valued for its lightweight design and ease of maneuverability. It has a suitable PSI range for home improvement tasks, allowing for an efficient painting experience without the complexity. The convenient compact storage feature makes it ideal for homeowners and occasional users.

On the other hand, the SDP5 is specifically designed for users who prioritize user-friendliness. It includes features like a flexible suction tube, allowing users to paint directly from the can, reducing cleanup. The SDP5 also incorporates Graco’s exclusive SmartControl technology, ensuring consistent power and pressure throughout the spraying process.

All four models share key technologies such as the stainless-steel piston pump, which enhances durability and lifespan and the ability to handle a wide array of coatings without the need for thinning.

In conclusion, whether for professional use with the SDP15 and SDM15 or for home projects with the SDM5 and SDP5, Graco's lineup provides a range of versatile, efficient, and user-friendly options. Their focus on technology and practical features makes them a top choice for all painting needs.