Graco 311593N important safety instructions Fluid Flow in gpm lpm

Page 19

Technical Data

Fluid Pressure

psi (MPa, bar) 500 (3.50, 35.0)

450 (3.15, 31.5)

400 (2.80, 28.0)

350 (2.41, 24.1)

300 (2.10, 21.0)

250 (1.72, 17.2)

200 (1.4, 14.0)

150 (1.03, 10.3)

100 (0.70, 7.0)

50 (0.35, 3.5)

0

Pressure and Flow Capability of E-Flo Family with 50 Hz Motor

(continuous production use)

				Key:
			B	A	E-Flo 1500
	A		B	B	E-Flo 2000
	A			B	E-Flo 2000
				C	E-Flo 3000
			C	D	E-Flo 4000
				D
5	10	15	20	25
(19)	(38)	(57)	(76)	(95)

Fluid Flow in gpm (lpm)

Pressure and Flow Capability of E-Flo Family with 60 Hz Motor

psi (MPa, bar)

(continuous production use)

500 (3.50, 35.0)

Key:

	450 (3.15, 31.5)		A	B		A	E-Flo 1500
			A			B	E-Flo 2000
						B	E-Flo 2000
	400 (2.80, 28.0)				C	C	E-Flo 3000
					C	D	E-Flo 4000
	350 (2.41, 24.1)
	300 (2.10, 21.0)					D
Pressure	300 (2.10, 21.0)
	250 (1.72, 17.2)

Fluid	200 (1.4, 14.0)
Fluid	150 (1.03, 10.3)
	150 (1.03, 10.3)
	100 (0.70, 7.0)
	50 (0.35, 3.5)
	0	10	15	20	25	30
	5	10	15	20	25	30
	(19)	(38)	(57)	(76)	(95)	(114)

Fluid Flow in gpm (lpm)

311593N

19

Image 19

Contents Flo4-Ball Piston Pumps Related Manuals ContentsSource ModelsFlo 4-Ball Piston Pumps Maximum Working Pressure and Pump Operational LimitsModels Is Sensor Circuit ApprovalsComponent Approvals MotorFire and Explosion Hazard Electric Shock Hazard Flo Electric Circulation Pump OverviewArea HazardousEntrance Overview Ground the System 120373 UL/CSA Control Box Controls and IndicatorsVariable Frequency Drive VFD Local Control BoxFill TSL Reservoirs SetupFlush before using equipment Fill gear reducer reservoir with oilStartup Pressure Relief ProcedureOperation PrimingEquations for each line Motor Speed and Flow Chart Check Gear Reducer Oil Level Maintenance Preventive Maintenance Schedule Clean the Slider Cylinder CollectorsFlushing Follow Pressure Relief Procedure,Changing the TSL Flo 2000/3000/4000 15 ft-lb 20.3 Nm Technical DataFluid Flow in gpm lpm Graco Information Graco Standard Warranty