Graco 311593N important safety instructions Component Approvals, Motor, Is Sensor Circuit

Page 5

Approvals

Approvals

The E-Flo Pump meets requirements of the following approval agencies.

Refer to the individual components for other specific hazardous location listings.

Component	Part No.	Approvals

Mechanical Pump
		c T3

	ATEX
	EP1XXX
	EP3XXX
Motor		Ex de IIC T4 - CESI 05 ATEX 110X

	UL/CSA
	UL/CSA
	EP2XXX	Class I, Group D, Class II, Group F and G, Division 1, T3B
	EP2XXX	Hazardous Locations
	EP4XXX	Hazardous Locations
	EP4XXX

IS Sensor Circuit

EPX1XX

Class 1, Div. 1, Group C & D T3 Hazardous Locations

EEx ib IIB Ta = 0°C - 50°C - FM 06 ATEX 0025U

Ex ib IIB Ta = 0°C - 50°C - KTL 13-KB4BO-0088

311593N

5

Image 5

Contents Flo4-Ball Piston Pumps Related Manuals ContentsFlo 4-Ball Piston Pumps ModelsMaximum Working Pressure and Pump Operational Limits SourceModels Component Approvals ApprovalsMotor Is Sensor CircuitFire and Explosion Hazard Electric Shock Hazard Flo Electric Circulation Pump OverviewEntrance HazardousArea Overview Ground the System Variable Frequency Drive VFD Controls and IndicatorsLocal Control Box 120373 UL/CSA Control BoxFlush before using equipment SetupFill gear reducer reservoir with oil Fill TSL ReservoirsOperation Pressure Relief ProcedurePriming StartupEquations for each line Motor Speed and Flow ChartPreventive Maintenance Schedule MaintenanceClean the Slider Cylinder Collectors Check Gear Reducer Oil LevelChanging the TSL Follow Pressure Relief Procedure,Flushing Flo 2000/3000/4000 15 ft-lb 20.3 Nm Technical DataFluid Flow in gpm lpm Graco Information Graco Standard Warranty