1.3Display Unit
Mounting considerations
Select the mounting location considering the following conditions:
•Select a location where the display unit can easily be operated while observing the fishing ground or area surrounding the vessel.
•Locate the unit at least 1 meter away from equipment which contains mag- nets (radar magnetron, loudspeaker).
•A magnetic compass will be affected if placed too close to the display unit. Observe the fol- lowing compass safe distances to prevent de- viation to a magnetic compass: Standard compass, 2.2 m, Steering compass, 1.6 m.
•Select a location not exposed to direct sun- light, water splash or hot air.
•Select a location which accommodates the viewing angle shown at right.
Within 45°
Figure 1-16 Display unit
1.4Grounding the Display Unit and Transceiver Unit
Ground the equipment with a copper strap or ground wire to prevent interfer- ence.
DISPLAY UNIT
TRANSCEIVER UNIT
Cable clamp
Signal cable 06S4061
Earth terminal
Remove vinyl sheath; ground cable by cable clamp.
Earth terminal
CAUTION
Ground the equipment to prevent electrical shock and mutual interference.