Standard Horizon CP1000C, CP155C From the menu, Quick Activation by pressing Clear for 1 second

Page 21

Standard Horizon offers an optional cable called ACVC10 that allows any VCR or DVD to simply be plugged into the CP1000C.

Figure 2.12.1 - VCR/DVD Input

The CP1000C has the capablity to select the Video Input in three ways.

1. From the menu

Press [MENU], select SETUP, press [ENTER], select VIDEO INPUT press [ENTER],. A menu appears with the following options:

a. ACTIVATE VIDEO, the possible choices are Input 1, Input 2, Auto Switch (*). Activates the video mode to show the selected Video Input. If Input 1 or Input 2 is chosen, the chart plotter will show a warning message with the instructions to adjust the image from the selected Video Input. If the user agrees to proceed, the image from the selected video input will be shown. If Auto Switch is chosen, all the menus will be closed and the video input will be shown switching between the other Video Input (if connected) and the CHART page. See next section for details of setting up the switching times. If the user agrees to proceed, the image from the selected video input/s and the chart plotter page will be shown intermittently. The intermittence time is selected by Switching Timeout item.

b. SWITCHING TIMEOUT, the possible choices are 5,10,30 sec, 1, 5, 10 min. Allows selecting the timing to change from Video inputs and chart plotter display.

c. RESTORE DEFAULTS, the possible choices are Input 1, Input 2, All (*). Allows restoring the factory defaults for the Input 1 and Input 2 picture adjustment. The user can decide to reset the default for Input 1 or Input 2 individually, or to restore the defaults of the two Video Input simultaneously. When Restore default is executed, the message “OK” is shown next to the selected menu item.

NOTE (*)

If the video signal is not present on the video connector, the corresponding item in the menu will be shown with a light color (to identify that the option is not available).

2. Quick Activation by pressing [CLEAR] for 1 second

Pressing and holding [CLEAR] for 1 second from the Map Display or from any main page (Chart, Navigation, Highway, Celestial, GPS Status, DSC, NMEA DISPLAY); the following soft keys are shown: “INPUT 2”, “INPUT 1”, “AUTO SWITCH. If no video signal is detected on the Video Input connectors, the 3 soft keys will be shown in light color in order to identify that they are not active.If only one video signal is detected on the Video Input connectors, the corresponding soft key and “AUTO SWITCHwill be shown with dark color and the other soft keys will be shown with light color.

3. Quick Activation by soft keys

It will be possible to assign the possibility to set the Video Input mode to any of the 5 soft keys. Press one of the soft keys, the soft keys functions are shown. Pressing and holding for 1 second one of the soft keys, the soft key customization list will be shown. By selecting VIDEO option it will be possible to assign the soft key to execute the Video Input function. Once the soft key has been associate to Video Input, its label will show the message

GPS chartplotters

 

Page 23

 

Image 21
Contents CP155C / CP175C / CP1000C FCC Compliance Statement Cleaning Procedure for the Chart Plotter Screen Page Table of Contents Creating Marks Using Find Services & More FunctionRoutes TracksTrouble Shooting Technical Tests Advanced SettingsSpecifications Appendix Terms IndexGPS chartplotters General Information IntroductionPacking List 0 CP155C Packing List0a CP155C Optional Accessories Optional Accessories0b CP1000C Optional Accessories 1 CP175C Packing List0b Color Video Camera GPS chartplotters Getting Started Mounting the GPS ChartplotterBracket Mounting Flush MountingMounting the GPS Smart Antenna Installing/removing chartplotter FlushConnections Flush MountingVideo Connector for CP1000C 0b Connection Table for CP175C 12VDC Power and Nmea CableSmart GPS Cable GPS chartplotters Nmea Connections Battery ConnectionsGPS Position on a VHF Radio Other DSC VHF ManufacturesConnecting Digital INSTRUMENTS/AUTOPILOT/RADAR Optional Black BOX Fish FinderOutputting Nmea to a Personal Computer Nmea Data Video Input for CP1000C only 2.12.0 Video Camera InputVCR or DVD Input From the menu Quick Activation by pressing Clear for 1 secondQuick Activation by soft keys 14 Inserting C-CARD Optional C-MAP NT+ Cartography Inserting the C-CARDControls and Connections Controls and Indicators0a The alphanumeric keys on CP1000C Power On, Off and ShuttlePoint operation0b The soft keys on CP175C/CP1000C Getting StartedCursor Mode Cursor Vs. Home ModeHome mode Cursor and Menu selection speedChanging the Ships Icon Selecting North Up or Course Up Changing the backlight and contrastAdjusting Time Adjusting the TimeCoordinate System Menu Selecting Loran TD or Other Coordinate SystemSelecting Pages Using Soft Keys Changing the Chart ColorCustomizing the Soft Keys Other Settings in General Setup MenuLanguage Using Find Services & More Function Port ServicesOther Available Searches GPS chartplotters Creating Marks Creating a NEW Mark Using the ChartEditing a Mark MarkMoving a Mark or Waypoint Deleting a Mark or WaypointCreating a NEW Mark with the MARK/WAYPOINTS List MARK/WAYPOINTS ListGoto Cursor Press Menu and select User PointsGoto Cursor Goto Mark GPS chartplotters Deleting a MOB Point MAN Over Board MOB FunctionGPS chartplotters Routes Creating a Route Using WaypointsMaking Additional Routes Creating a Route Using Marks on the ChartInserting a Waypoint Into a Route Other Settings in Route MenuGoto a Route By select RouteGPS chartplotters Tracking TracksOther Settings in Track Menu Using the Trip LOGSaving and starting a new Track Using the Trip Log Resetting the Trip LogGPS chartplotters User C-CARD User C-CARD MenuFormatting the User C-CARD Loading a file Transferring files to the optional User C-CARDDeleting a file from the User C-CARD Changing the User C-CARDPages Selection by MenuSelection by Soft KEY Window Selections ChartAdditional Functions on Chart Setting up the Chart Page using the Map Setup SelectionTurning Off Information on Icon Points Marine Settings Menu Advanced Chart SetUpLand Settings Menu Depth Settings MenuChart Settings Menu Customizing the Data WindowsNavigation Customizing Chart SettingsNavigation Data page with Compass Rose HighwayGPS Status CelestialChanging date Changing to and from Daylight Savings timeChanging the Nmea page Windows Nmea DisplayNmea DEPTH, Wind SPEED, Temp and SOG Trend Pages VHF Digital Selective CallingInterfacing Position Request DSC Distress CallGPS chartplotters Advanced Settings INPUT/OUTPUT NmeaNavigate Coordinate System Selections are CompassArrival Alarm AlarmsGPS chartplotters Trouble Shooting GPS chartplotters Technical Tests RAM Menu resetSystem Test DIM MenuCartridges Serial PortsModem test Specifications 14.0a CP155C SpecificationsMAP NT+ C-CARD 0b CP175C chartplotter Dimensions mm/inch 14.0b CP175C Specifications0c CP1000C chartplotter Dimensions mm/inch 14.0c CP1000C SpecificationsSmart Waas Receiver Specifications Appendix Terms Units ALT Index26, 37 Code XSegSH11c/S3egSH5c/S3egSH7c 321c784/321c736/322c844 A N D a R D H O R I Z O N L I M I T E D W a R R a N T Y