Standard Horizon CP1000C Changing the backlight and contrast, Selecting North Up or Course Up

Page 27

1.Press [MENU] and move the ShuttlePoint knob to select SETUP and press [ENTER].

2.Move the ShuttlePoint knob to select GENERAL SETUP and press [ENTER].

3.Now select SHIP ICON and press [ENTER] or move the ShuttlePoint knob to the right to show the popup window with ship icons.

4.Move the ShuttlePoint knob to select the desired icon and press [ENTER] or move the ShuttlePoint knob to the right to select a new icon.

5.Press [CLEAR] or move the ShuttlePoint knob to the left to exit the menu and show the Chart Page.

3.1.4Changing the backlight and contrast

With the chartplotter turned On, briefly press [PWR] to show the light and contrast popup window. Move the ShuttlePoint knob to the left or right to adjust the LCD backlight intensity or up or down to change the LCD contrast.

Press [ENTER] to set.

Figure 3.1.4 - Backlight and Contrast adjustment

3.1.5Selecting North Up or Course Up

The default selection is NORTH UP, however you may want the top of the Chart Page oriented so it will always show the area ahead of the direction your vessel is traveling which is called COURSE UP.

Figure 3.1.5 - General Setup menu

1.Press [MENU], move the ShuttlePoint knob to select SETUP and press [ENTER] or move the ShuttlePoint knob to the right.

2.Move the ShuttlePoint knob to GENERAL SETUP and press [ENTER] or move the ShuttlePoint knob to the right.

3.A popup window will be shown, move the ShuttlePoint knob to COURSE UP/NORTH UP and press [ENTER] or move the ShuttlePoint knob to the right.

4.Another popup window will be shown with NORTH UP and COURSE UP, move the ShuttlePoint knob to the desired selection and press [ENTER] or move the ShuttlePoint knob to the right.

GPS chartplotters		Page 29

Image 27

Contents CP155C / CP175C / CP1000C FCC Compliance Statement Cleaning Procedure for the Chart Plotter Screen Page Table of Contents Tracks Using Find Services & More FunctionCreating Marks RoutesAppendix Terms Index Advanced SettingsTrouble Shooting Technical Tests SpecificationsGPS chartplotters 0 CP155C Packing List IntroductionGeneral Information Packing List1 CP175C Packing List Optional Accessories0a CP155C Optional Accessories 0b CP1000C Optional Accessories0b Color Video Camera GPS chartplotters Flush Mounting Mounting the GPS ChartplotterGetting Started Bracket MountingMounting the GPS Smart Antenna Installing/removing chartplotter FlushConnections Flush MountingVideo Connector for CP1000C 0b Connection Table for CP175C 12VDC Power and Nmea CableSmart GPS Cable GPS chartplotters Other DSC VHF Manufactures Battery ConnectionsNmea Connections GPS Position on a VHF RadioConnecting Digital INSTRUMENTS/AUTOPILOT/RADAR Optional Black BOX Fish FinderOutputting Nmea to a Personal Computer Nmea Data Video Input for CP1000C only 2.12.0 Video Camera InputVCR or DVD Input From the menu Quick Activation by pressing Clear for 1 secondQuick Activation by soft keys 14 Inserting C-CARD Optional C-MAP NT+ Cartography Inserting the C-CARDControls and Connections Controls and IndicatorsGetting Started Power On, Off and ShuttlePoint operation0a The alphanumeric keys on CP1000C 0b The soft keys on CP175C/CP1000CCursor Mode Cursor Vs. Home ModeHome mode Cursor and Menu selection speedChanging the Ships Icon Selecting North Up or Course Up Changing the backlight and contrastAdjusting Time Adjusting the TimeCoordinate System Menu Selecting Loran TD or Other Coordinate SystemSelecting Pages Using Soft Keys Changing the Chart ColorCustomizing the Soft Keys Other Settings in General Setup MenuLanguage Using Find Services & More Function Port ServicesOther Available Searches GPS chartplotters Mark Creating a NEW Mark Using the ChartCreating Marks Editing a MarkMoving a Mark or Waypoint Deleting a Mark or WaypointCreating a NEW Mark with the MARK/WAYPOINTS List MARK/WAYPOINTS ListGoto Cursor Press Menu and select User PointsGoto Cursor Goto Mark GPS chartplotters Deleting a MOB Point MAN Over Board MOB FunctionGPS chartplotters Routes Creating a Route Using WaypointsMaking Additional Routes Creating a Route Using Marks on the ChartBy select Route Other Settings in Route MenuInserting a Waypoint Into a Route Goto a RouteGPS chartplotters Tracking TracksOther Settings in Track Menu Using the Trip LOGSaving and starting a new Track Using the Trip Log Resetting the Trip LogGPS chartplotters User C-CARD User C-CARD MenuFormatting the User C-CARD Changing the User C-CARD Transferring files to the optional User C-CARDLoading a file Deleting a file from the User C-CARDPages Selection by MenuSelection by Soft KEY Window Selections ChartAdditional Functions on Chart Setting up the Chart Page using the Map Setup SelectionTurning Off Information on Icon Points Marine Settings Menu Advanced Chart SetUpCustomizing the Data Windows Depth Settings MenuLand Settings Menu Chart Settings MenuNavigation Customizing Chart SettingsNavigation Data page with Compass Rose HighwayChanging to and from Daylight Savings time CelestialGPS Status Changing dateChanging the Nmea page Windows Nmea DisplayNmea DEPTH, Wind SPEED, Temp and SOG Trend Pages VHF Digital Selective CallingInterfacing Position Request DSC Distress CallGPS chartplotters Advanced Settings INPUT/OUTPUT NmeaNavigate Coordinate System Selections are CompassArrival Alarm AlarmsGPS chartplotters Trouble Shooting GPS chartplotters DIM Menu RAM Menu resetTechnical Tests System TestCartridges Serial PortsModem test Specifications 14.0a CP155C SpecificationsMAP NT+ C-CARD 0b CP175C chartplotter Dimensions mm/inch 14.0b CP175C Specifications0c CP1000C chartplotter Dimensions mm/inch 14.0c CP1000C SpecificationsSmart Waas Receiver Specifications Appendix Terms Units ALT Index26, 37 Code XSegSH11c/S3egSH5c/S3egSH7c 321c784/321c736/322c844 A N D a R D H O R I Z O N L I M I T E D W a R R a N T Y