The MARK key
Places Mark under the ships position when in Home Mode (in Cursor Mode under the cursor).
The ROUTE key
When pressed places a Waypoint. Succeeding presses place more Waypoints to form a Route.
The PWR key and Lamp/Contrast
Press and hold [PWR] to turn the chartplotter on or off. Once on press [PWR] to show the Contrast and Lamp popup window. Press and immediately release [PWR] to adjust light and contrast on the display.
The MOB key
When pressed the GPS chartplotter automatically places a Mark on the Chart Page and all navigation is towards the position of the MOB Mark.
3.0a The alphanumeric keys on CP1000C
The 10 alphanumeric keys
The 10 alphanumeric keys are used for entering in alphanumeric data.
For alphanumeric input: pressing the key the first time enters the first letter, the second time it enters the second letter, the third time it enters the third letter; the forth time it enters the number. After a short time the entered character (letter or number) is confirmed and the cursor is moved to the next location.
For numeric input: to enter a number in a Lat Lon: press the key of the number you wish to enter, continue pressing the numbered keys until the lat lon is entered. The cursor is moved to the next position. Pressing the ShuttlePoint knob up/down changes the value; pressing the ShuttlePoint knob left/right moves the cursor to the previous/next location.
3.0b The soft keys on CP175C/CP1000C
The 5 keys in the bottom part of the front panel (hereinafter named soft keys) have different functions associated depending on the software: their labels are shown on the screen immediately above the keys (the user can customize the function associated).
The soft keys
These keys allow quick selection to the many pages the GPS chartplotter has. These key can be customized to your preference, however from the factory the keys are preprogram- med with the following pages. From left to right CHART, NAV, HIGHWAY, CELESTIAL, NMEA DISPLAY. Press any of the keys and you will see popup windows above the keys. To goto a specific page press the key with the desired popup window. The popup windows will automatically disappear if a key is not pressed or can be removed by pressing [CLEAR].
3.1GETTING STARTED
The Getting Started section will take you through the frequently used operations and assist you to customize the look of the chartplotter.
Legend:[MENU] If you see brackets around a bold and capital letter word this refers to a key press. GENERAL SETUP When a word(s) is bold capital letters and underlined, this refers to a menu selection item.
3.1.0Power On, Off and ShuttlePoint operation
1.Press and hold [PWR] until the display shows the startup page. To turn off, press and hold [PWR] until the display turns off.
Page 26 |
| GPS chartplotters |
|