Standard Horizon CP155C, CP1000C, CP175C owner manual Smart Waas Receiver Specifications

14.1SMART WAAS RECEIVER SPECIFICATIONS

This Smart DGPS WAAS receiver is based on a ultimate 12 channel GPS engine that delivers accuracy better than three meters by decoding the GPS correction signals from the satellite-based WAAS (Wide Area Augmentation System). The GPS engine, interface electronics and the passive antenna are enclosed inside the water-proof plastic housing. This provides advanced state of the art GPS performance in an easy to use package.

PHYSICAL CHARACTERISTICS

Color	: Ivory white.
Dimensions	: 97mm in diameter x 32mm in height (flush mounted) or 61,5mm
	on flag-pole mount.
Weight	: 160 grams (without cable).
Cable GPH 10	: white 15 meter 8x28AWG cable with 6 pins female connector
ELECTRICAL CHARACTERISTICS
Input Voltage	: 10 Vdc to 35 Vdc unregulated.
Input Corrent	: 112 mA @ 12 Vdc

	60 mA @ 24 Vdc
	45 mA @ 35 Vdc
GPS Receiver Sensivity : -145 dBW minimum
GPS PERFORMANCE
Receiver	: WAAS (North America), EGNOS (Europe), MSAS (Asia)
Geodetic Datum	: WGS84
Channels	: 12
Frequency	: 1575.42MHz (L1, C/A code)
ACQUISITION TIME (Approximate)
Reacquisition	: less than 1 second
Hot Start	: 8 seconds (typical)
Warm Start	: < 40 seconds (typical)
Cold Start	: < 45 seconds (typical)
ACCURACY
Position	: less than 10' (3m), 95% of the time
Speed	: 0.3 Knots RMS
NMEA OUTPUT MESSAGES/UPDATE RATE
GGA	: 1 second
GLL	: 1 second
VTG	: 1 second
RMC	: 1 second
GSA	: 3 seconds
GSV	: 3 seconds
PCMPD	: 1 second

Page 78 GPS chartplotters