8.TRACKS
The GPS chartplotter has the capability to store 5 individual and record up to 3000 Track Points.
Before using the Track function you will need to setup the Track function that suits your boat. The Track function tracks your vessels location as it moves through the water. The Track function can be setup to lay down a Track for a predetermined time or distance interval. If you have a fast moving boat you may want to setup the chartplotter to record a Track point every 0.5NM or if you have a sail boat you may want to setup to lay down a Track point once ever 1 minute.
NOTE
Pls note the Track point memory is 3000 points. This means for a long journeyyou may have to adjust the time or distance to be able to track your journey. It should be noted when the 3000 Track points are used up the first Track point layed down will be deleted when a new point is placed on the chart.
1.Press [MENU] and highlight USER POINTS.
2.Press [ENTER] or move the ShuttlePoint knob to the right.
3.Press [MENU] and highlight TRACK.
4.Press [ENTER] or move the ShuttlePoint knob to the right.
5.Move the ShuttlePoint knob to highlight STEP UNIT and choose
6.Press [ENTER] or move the ShuttlePoint knob to the right.
7.Highlight TIME or DISTANCE and press [ENTER] or move the ShuttlePoint knob to the right.
8.If the selected STEP UNIT was TIME then highlight TIME in the menu, if DISTANCE was selected then highlight DISTANCE and press [ENTER] or move the ShuttlePoint knob to the right.
Figure 8 - Distance Units and Time Units
7.Select the desired DISTANCE or TIME step interval and press [ENTER] or move the ShuttlePoint knob to the Right.
8.Press [CLEAR] or move the ShuttlePoint knob to the left until the chart page is shown.
8.0TRACKING
You may have to take a few trips to see how you like the Distance or Time Interval setup
GPS chartplotters |
| Page 49 |
|