| Seabed Type | : Enables or disable the seabed type; “M” Mud, “R” Rock, “K” Kelp, “St” Stone… |
|
| Ports & Services | : Enables or disable the display of Ports and Services (areas along the shore with facilities for |
|
|
| mooring, petrol, hospitals, Coast Guard, Maintenance, Electricity, Police… | |
| Tracks & Routes | : Enables or disables the display of Tracks and Routes (recommended and established routes |
|
|
| for ships at Sea, including traffic separation schemes, deep water routes…). | |
Underwater Objects : Enable or disables the display of underwater objects (obstructions, wrecks, cables….).
10.0.4.1 Depth Settings Menu
The Depth Settings Menu controls the depth information shown on the Chart Page.
Depth Areas | : Enables or disables the display of depth areas |
Depth Areas > | : Sets a min reference depth value. |
Depth Areas < | : Sets a max reference depth value |
Depth Lines and Soundings : Enables or disables the display of Depth Lines and Soundings.
Depth Lines & Soundings > : Sets a min reference depth & soundings value.
Depth Lines & Soundings < : Sets a max reference depth & soundings value.
10.0.4.2 Land Settings Menu
The Land Settings menu controls the level of cartographic details shown on the land areas.
Rivers & Lakes : Enables or disables the display of rivers and lakes.
Natural Features : Enables or disbles the display of natural features (any topographic features formed by the action of natural process; coastlines…)
Cultural Features : Enables or disables cultural features (any man made topographic feature;
Landmarks | : Enables or disables the display of landmarks (any prominent objects such as monument, building, |
| silo, tower, mast… on land which can be used in determining a location or a direction). |
10.0.4.3 Chart Settings Menu
The Chart settings menu controls the details shown on the
Lat/Lon Grid : Enables or disables the display of Latitude and Longitude grid lines.
Chart Boundaries : Enables the display of Chart Boundaries, The Auto settings shows only the last 4 charts contained on the
|
| Figure 10.0.4.3 - Chart Settings Menu | |
Cartography | : Allows the chartplotter to zoom in to lower levels where that the | ||
|
| cover. When this feature is disabled and the zoom key is pressed the chartplotter will zoom in and | |
|
| show cartography that is either on the | |
|
| reached that does not have cartography the chartplotter will continue to zoom in to lower scales, | |
|
| however no cartography will be shown. | |
Mixing Levels | : When the map coverage at the current chart scale does not fill the entire display, the chartplotter | ||
|
| draws the rest of the map using charts from above and below the current scale. When this function | |
|
| is turned on you will notice the display may redraw 2 to 3 times to show all the details. | |
|
| NOTE |
|
| This function only operates with | ||
|
|
|
|
|
| ||
Declutter | : Due to the amount of cartography shown on the display, it may be necessary to enable the declutter | ||
|
| filter. The Declutter filter assists in the appearance of the cartography on the display (helpful with | |
|
| Full cartography is enabled). | |
10.0.5 Customizing the Data Windows
The data fields contained on the General, 1 Line small/large and 2 line small data windows
GPS chartplotters |
| Page 59 |
|